Federal Contract Awards

General Services Administration

HANDLE, SOCKET WRENCH: SHALL BE IAW SAE AEROSPACE STANDARD: AS4283B - HANDLES AND ATTACHMENTS FOR HAND SOCKET WRENCHES, DATED DECEMBER 2011 TYPE I: HANDLES CLASS 1: HINGED HANDLES SQUARE DRIVE SZ: 1/2 INCH OVERALL LENGTH: 14-1/2 INCHES MINIMUM AND 19

General Services Administration

8/PT SHREDDER OIL

General Services Administration

MULTI-TOOL, FOLDING, POCKET: TOOL QUANTITY: 14 TOOLS INCLUDED: THIS MULTI-TOOL SHALL CONSIST OFONE (1) EACH OF THE FOLLOWING FOURTEEN (14) TOOLS: NEEDLE NOSE PLIERS WIRE CUTTER WIRE CRIMPER FINE EDGE DROP POINT KNIFE BLADE SERRATED SHEEPSFOOT KNIFE B

General Services Administration

WRENCH, TORQUE: IAW SOCIETY OF AUTOMOTIVE ENGINEERS, AEROSPACE HAND TORQUE WRENCHES (MECHANICAL, IMPULSE) AS28431 REVISION A, DATED FEBRUARY 21, 2011. TYPE I: BI-DIRECTIONAL TORQUE WRENCH CLASS 2 RATCHET HEAD (PRECISE CLOCKWISE TORQUE) OVERALL LENGTH

General Services Administration

PEN, BALL-POINT: ITEM NAME PEN, BALL-POINT PEN POINT SZ 0.5 MM PEN POINT TYPE FINE PEN POINT RETRACTABILITY RETRACTABLE UNIT TYPE POCKET INK TYPE WATER BASED GEL INK CARTRIDGE REPLACEABILITY NON-REPLACEABLE INK COLOR BLACK BARREL COLOR CLEAR WITH BLA

General Services Administration

TAPE,CORRECTION

General Services Administration

PENCIL, MECHANICAL: ITEM NAME PENCIL, MECHANICAL OVERALL LEAD POINT SZ 0.5 MM OVERALL LEAD POINT TYPE FINE UNIT TYPE MECHANICAL PENCIL USAGE DESIGN DESK OR POCKET OVERALL LEAD COLOR BLACK OPERATING MECHANISM PUSH ACTION SPECIAL FEATURE INTERIOR COMPA

Department of Agriculture

IRGASON EDDY COVARIANCE SENSOR WITH DATALOGGER - COLUMBIA, MO

Department of State

TRANSFORMERS, MOTOR RUN CAPACITORS, CONDENSATE PUMPS, STRAIGHT BLADE PLUGS

Department of State

TEMPEST CARD READERS

Defense Nuclear Facilities Safety Board

DNFSB DRUG FREE WORKPLACE PROGRAM TESTING SERVICES

General Services Administration

KEY, SOCKET HEAD SCREW: IAW ASME B18.3-2003, SOCKET CAP, SHOULDER AND SET SCREWS, HEX AND SPLINE KEYS. KEY SZ: 4MM OVERALL LENGTH: 6-15/16 INCHES SHAFT LENGTH: 5-15/16 INCHES SHAFT WIDTH: 3/16 INCH (.18 INCH) HANDLE MATERIAL: PLASTIC SHAFT MATERIAL:

General Services Administration

DISK, ABRASIVE, ALUMINUM OXIDE, 180 GRIT, SCREEN TYPE MESH COMPOSITION, PLAIN FLAT, ROUND, 6.00 INCHES SPECIFICALLY DESIGHED TO BE USED WITH DUSTMASTER SUPREME ORBITAL SANDER DUST EXTRACTION VACUUM SYSTEMS

General Services Administration

TAB, SIGNAL: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

TAPE PKGG 2 IN WOLIVEDRAB

General Services Administration

TRUCK,HAND

General Services Administration

PLIERS: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.13 AS CONTAINED IN ASME B107.500-2010; THIS DOCUMENT INCORPORATES AND INCLUDES THE REVISIONS OF PRIMARY STANDARD B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.22, B107.23,

General Services Administration

CORD, COTTON, GENERAL P URPOSE SASH; UNBLEACHED/NATURAL; POLISHED FINISH; UI: RL/1000FT; SIZE 8 1/4 INCH DIAMETER

General Services Administration

SCREWDRIVER,FLAT TIP SEARS INDUSTRIAL SALES(CRAFTSMAN) P/N: 9-41421

General Services Administration

NOZZLE,CAULKING GUN

General Services Administration

PEN, BALL-POINT: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

SOCKET, SOCKET WRENCH: IAW U.S. ARMY RESEARCH, DEVELOPMENT AND ENGINEERING COMMAND EDGEWOOD CHEMICAL BIOLOGICAL CENTER DRAWING NUMBER 11A7000766, PN 11A7000766-4, DATED NOVEMBER 24, 2015. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

General Services Administration

FILE WORK ORGANIZER

General Services Administration

PAD, WRITING PAPER: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

CARTRIDGE,TONER MFR PN: 006R01699 GENUINE XEROX STANDARD MAGENTA TONER CARTRIDGE (15,000 PAGES)

General Services Administration

PADS WRITING PAPER

Department of Agriculture

LIPHART ENTERPRISES LLC WAOWF000797 E467

General Services Administration

NOTEBOOK, STENOGRAPHER

General Services Administration

PTM157

General Services Administration

SHEARS METAL CUTTING, HAND MSP-1313

General Services Administration

BINDER,LOOSE-LEAF

General Services Administration

CARDS, TENT: - SEE ATTACHED DOCUMENT FOR DETAIL.

Department of State

JVCKENWOOD VHF TIER TWO HANDHELD RADIOS

Department of State

TRANSPORTATION

Smithsonian Institution

TEMP HELP FOR HR RELATED ACTIVITIES

General Services Administration

FILE FOLDERS,BROWN,PK100

General Services Administration

CARTRIDGE, TONER: - SEEATTACHED DOCUMENT FOR DETAIL. PN CF450A

General Services Administration

XEROGRAPHIC PAPER FOR SAVIN LIQUID TONER 8 1/2''X 11''BPA-COS-5128

General Services Administration

HAMMER, HAND: TYPE III: BLACKSMITH'S CROSS-PEEN SLEDGE OVERALL LENGTH: 16 INCHES HEAD WEIGHT: 3 POUNDS HANDLE MATERIAL: HICKORY WOOD (PARTIAL DESCRIPTION)

General Services Administration

TAPE, LABELING: ITEM NAME TAPE, LABELING OVERALL WIDTH 0.500 INCHES OVERALL LENGTH 26.00 FEET USAGE APPLICATION MOST BROTHER P-TOUCH LABELS OVERALL COLOR BLACK CHARACTERS ON WHITE TAPE SURFACE FINISH GLOSSY ADHESIVE TYPE PRESSURE SENSITIVE ADHESIVE L

General Services Administration

CARTRIDGE, TONER: ITEM NAME CARTRIDGE, TONER I.A.W. LEXMARK P/N C734A4KG CARTRIDGE TYPE NEW (OEM GENUINE) SPECIAL FEATURE STANDARD CARTRIDGE FOR USE WITH LEXMARK COLOR LASER PRINTERS INCLUDING C734, C736, X734, X736, X738 SERIES AND ALL OTHERS THAT U

General Services Administration

KNIFE, CRAFTSMAN'S: IAW GSA PURCHASE DESCRIPTION 5110-00-892-5071, DATED 23 APR 2001. THE BLADES FOR THE KNIFE SHALL BE IAW THE LATEST VERSION OF GSA PURCHASE DESCRIPTION 5110-00-293-2865. (PARTIAL DESCRIPTION)

General Services Administration

GAGE, DEPTH, DIAL INDICATING: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

PLIERS,SLIP JOINT CHANNELLOCK INC P/N: 420

General Services Administration

FAN, CIRCULATING, HIGH VELOCITY, MULTIPURPOSEMSP-369

General Services Administration

SCREWDRIVER, FLAT TIP: TYPE I: SCREWDRIVER ASSEMBLY CLASS 1: FLAT TIP STYLE A: CABINET, STRAIGHT SIDES OVERALL LENGTH: 8-7/8 INCHES BLADE LENGTH: 5 INCHES TIP THICKNESS: .03 INCH TIP WIDTH: 3/16 INCH BLADE MATERIAL: STEEL HANDLE MATERIAL: PLASTIC BLA

General Services Administration

SOCKET, SOCKET WRENCH: IAW SOCIETY OF AUTOMOTIVE ENGINEERS AEROSPACE (SAE) STANDARD AS955, METRIC SOCKETS, WRENCHES, HAND TWELVE POINT, HIGH STRENGTH, THIN WALL DATED 2012. TYPE I: METRIC SOCKETS (12 POINT) CLASS 1: METRIC SOCKETS STYLE A: REGULAR LE

General Services Administration

PAPER, COPYING, XEROGRAPHIC PROCESS: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

PRODUCT MADE IN USA. SEE IPD OR LONG DESCRIPTION FOR FURTHER DETAILS.

General Services Administration

PROTECTOR, DOCUMENT: - SEE ATTACHED DOCUMENT FOR DETAIL.