Federal Contract Awards

General Services Administration

PAPER, COPYING, XEROGRAPHIC PROCESS: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

WRENCH, ADJUSTABLE: IAWASME B107.100-2020, FLATWRENCHES. CAT 6 WRENCH,BOX FORMERLY 1B107.6-1 CAT 8 ADJUSTABLE WRENCHESFORMERLY 1B107.8 CAT 9BOXWRENCHES, DOUBLE HEADFORMERLY 1B107.9 CAT 21WRENCH, CROWFOOT FORMERLY 1B107.21 CAT 39 OPEN END WRENCHES, DO

General Services Administration

KEY, SOCKET HEAD SCREW:IAW AMERICAN SOCIETY OFMECHANICAL ENGINEERS(ASME) B18.3.2M-1979. HEX KEYSZ: 5MM SERIES: LONG MATERIAL: STEEL FEATURES: BALL END; L-HANDLE (PARTIAL DESCRIPTION)

General Services Administration

PAPER, COPYING, XEROGRAPHIC PROCESS: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

NUTDRIVER: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.12-2004. TYPE III: MINIATURE HANDLE OVERALL LENGTH: 89 MM HEX WRENCHING SZ: 3 MM, SINGLE END HANDLE MATERIAL: PLASTIC SHAFT MATERIAL: STEEL (PARTIAL DESCRIPTION)

General Services Administration

LABEL, AVERY 5161 4 X 1'' WHITE LP20101

General Services Administration

TAB,SIGNAL

General Services Administration

CLIP,PAPER

General Services Administration

TAPE,PRESSURE SENSI ADHESIVE: ITEM NAME TAPE, PRESSURE SENSITIVE ADHESIVE OVERALL WIDTH 2.000 INCHES OVERALL LENGTH 60.00 YARDS OVERALL THICKNESS 0.003 INCHES UNIT TYPE DUCT TAPE UNIT DESIGN HIGH TEMPERATURE ALUMINUM TAPE OVERALL COLOR SILVER OVERALL

General Services Administration

SCREWDRIVER SET, FLAT TIP AND CROSS TIP: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

CORD,FIBROUS

General Services Administration

PADS, SCOURING: LIGHT DUTY NON-WOVEN PAD COMP- OSED OF ABRASIVE COATED SYNTHETIC FIBERS. SZ. W-6 (+/- 1/8"), L-9-1/2 (+/- 1/8"), T-1/4 (MIN "). U/I PG (10 EA PER PG)

General Services Administration

HAMMER, HAND: OVERALL LENGTH: 13-1/2 INCHES HEAD WEIGHT: 20 OUNCES HEAD MATERIAL: STEEL HANDLE MATERIAL: STEEL FEATURES: CURVED CLAW (PARTIAL DESCRIPTION)

General Services Administration

WRENCH, BOX AND OPEN END, COMBINATION: IAW SOCIETY OF AUTOMOTIVE ENGINEERS AEROSPACE (SAE) STANDARD AS955, METRIC SOCKETS, WRENCHES, HAND TWELVE POINT, HIGH STRENGTH, THIN WALL DATED 2012. TYPE III: METRIC COMBINATION WRENCH (12-POINT) CLASS 1: 15 DE

General Services Administration

EXTENSION, SOCKET WRENCH: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.2 - 2002. TYPE IV: BARS, EXTENSION SQUARE DRIVE SZ: 3/4 INCH OVERALL LENGTH: 13 INCHES MATERIAL: STEEL COATING: BLACK OXIDE FEATURES: RIGID (EXCEPTIONS APPLY) (PARTIAL

General Services Administration

RECORD

General Services Administration

TAPE PSA 2 IN W

General Services Administration

BIT, SCREWDRIVER: STANDARD INCORPORATES THE FOLLOWING STANDARDS INTO ONE. B107.600 STANDARD USE KEY FIELD CODE: B107.15 FLAT TIP SCREWDRIVERS 1B107.15 B107.26 SCREWDRIVER BITS, HAND DRIVEN 1B107.26 B107.30 CROSS TIP SCREWDRIVERS 1B107.30 B107.31SCREW

General Services Administration

MARKER TUBE TYSH WT 15#

General Services Administration

PEN, BALL-POINT: ITEM NAME PEN, BALL-POINT OVERALL INK CARTRIDGE LENGTH 4.625 INCHES MINIMUM OVERALL BEAD CHAIN LENGTH 24.00 INCHES MINIMUM PEN POINT TYPE MEDIUM UNIT TYPE DESK INK CARTRIDGE TYPE NON-CORROSIVE BALL INK COLOR BLACK INK CARTRIDGE REPLA

General Services Administration

EXTENSION,SOCKET WRENCH SNAP-ON INC P/N: SXWK5

General Services Administration

KEY,SOCKET HEAD SCREW SNAP-ON INC P/N: AWL12D

General Services Administration

DESK,FLAT TOP

General Services Administration

GLOVES,DISPOSABLE,NITRILE:AMBIDEXTROUS,POWDER- FREE,LATEX-FREE,INDUSTRIAL GRADE,NITRILE GLOVES FOR GENERAL PURPOSE USE. NITRILE SHALL BE SOFT FORMULATION ALLOWS GLOVES TO CONFORM TO HAND. 4 MILS THICK, MIN. MEDIUM, 9 1/2 IN, DISPENSER BOX. U/I BX (10

General Services Administration

BAG, SAND: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

PEN, BALL-POINT: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

TAPE,EMBOSSING

General Services Administration

PULLER, MECHANICAL: SEE DESCRIPTION IN CONTRACT

General Services Administration

P/N FRS 1-110-10-2-0

General Services Administration

HANDLE,ACME THREADE

General Services Administration

WRENCH, OPEN END: IAW ASME B107.100-2020, FLAT WRENCHES. CAT 6 WRENCH,BOX FORMERLY 1B107.6-1 CAT 8 ADJUSTABLE WRENCHES FORMERLY 1B107.8 CAT 9 BOX WRENCHES, DOUBLE HEADFORMERLY 1B107.9 CAT 21WRENCH, CROWFOOT FORMERLY1B107.21 CAT 39 OPEN ENDWRENCHES, D

General Services Administration

MARKER ASSORTMENT, TUBE TYPE: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

TOWEL, PAPER: - SEE ATTACHED DOCUMENT FOR DETAIL.

Department of Veterans Affairs

PROSTHESIS: LOWER EXTREMITY

General Services Administration

NUTDRIVER: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.12-2004. TYPE III: MINIATURE HANDLE DRIVE SZ: 3.5 MM OVERALL LENGTH: 3-1/2 INCHES MATERIAL, HANDLE: PLASTIC FEATURES: MINIATURE (PARTIAL DESCRIPTION)

General Services Administration

INSERTER AND REMOVER, ELECTRICAL CONTACT: INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE III, CLASS 2, COMPOSITION B TYPE I: INSTALLING TOOL CLASS 2: REAR RELEASE OF CONTACTS COMPOSITION B: PLASTIC CONTACT SZ: 16 PN: M81969/14-03 (P

General Services Administration

BAR, WRECKING: TYPE II: NONSTRUCK NAIL-PULLER BAR CLASS 2: RIPPING/WRECKING OVERALL LENGTH: 30 INCHES BAR STOCK SZ: 3/4 INCH MATERIAL: STEEL FEATURES: GOOSENECK (PARTIAL DESCRIPTION)

General Services Administration

PLANNER,FIELD COMPL - SEE ATTACHED DOCUMENT FORDETAIL.

General Services Administration

DRILL, ELECTRIC, PORTABLE: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

BRUSH,DUSTING,BENCH

General Services Administration

TIP TOOL, THERMAL HANDPIECE: PACE INC. PN 1100-0206 (PARTIAL DESCRIPTION)

Department of Veterans Affairs

RAMP

General Services Administration

FILE FOLDER7

General Services Administration

WRENCH, SOCKET: IAW U.S. ARMY TANK AUTOMOTIVE DRAWING NUMBER 12506195, REVISION A. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

General Services Administration

SCREWDRIVER, CROSS TIP: STANDARD INCORPORATES THE FOLLOWING STANDARDS INTO ONE. B107.600 STANDARD USE KEY FIELD CODE: B107.15 FLAT TIP SCREWDRIVERS 1B107.15 B107.26 SCREWDRIVER BITS, HAND DRIVEN 1B107.26 B107.30 CROSS TIP SCREWDRIVERS 1B107.30 B107.3

General Services Administration

DRILL-DRIVER, ELECTRIC, PORTABLE: DRIVE TYPE: STRAIGHT HANDLE TYPE: PISTOL GRIP THROTTLE TYPE: TRIGGER VOLTAGE: 18VDC CHUCK TYPE: KEYLESS CHUCK SZ: 1/2 INCH SPEED: VARIABLE WITHIN 2 SPEEDS SPEED RATE: 0-500/0-1800 RPM (+/- 10%) CLUTCH SETTINGS: 18 (+

Department of State

NEW GOOGLE CLOUD PLATFORM BPA CALL FOR FSI - TEXT TO SPEECH

Department of State

FAC-ICASS-NEC-KEYWATCHERS GSO HOUSING AND FAC USE

General Services Administration

PADLOCK SET SHAPE, SOLID BODY, CORROSION RESISTANT STEEL OR CARBON STEEL, CASE HARDENED STEEL SHACKLE, LOCKS KEYED ALIKE, 1-KEY PER LOCK, 2-ADDITIONAL KEYS PER SET, 1.170 INCH VERTICAL SHACKLE CLEARANCE, .750 - .779INCH HORIZONTAL SHACKLECLEARANCE,.3

Department of Veterans Affairs

PROSTHESIS: LOWER EXTREMITY