Federal Contract Awards

General Services Administration

RULE, MACHINIST S: LENGTH: 12 INCHES WIDTH: 15/16 INCH MINIMUM AND 1.005 INCHES MAX THICKNESS: .04 INCH MINIMUM AND .051 INCH MAX GRADUATIONS: FACE 1 - EDGE 1: 1/32 INCH EDGE 2: 1/64 INCH FACE 2 - EDGE 1: 1/8 INCH EDGE 2: 1/16 INCH READING DIRECTION:

General Services Administration

PEN, ALL WEATHER: ITEM NAME PEN, ALL WEATHER I.A.W. J L DARLING CORP. P/N 97 OR EQUAL COMMERCIAL OVERALL PEN LENGTH 5.25 INCHES BASIS WEIGHT 0.06 POUNDS UNIT DESIGN ALL-WEATHER INK COLOR BLACK INK CARTRIDGE REFILLABILITY REFILLABLE BARREL COLOR BLACK

General Services Administration

CARRIER, TOOL: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

EXTENSION,SOCKET WRENCH SNAP-ON INC P/N: SXWK5

General Services Administration

PADS, FLOOR POLISHING: IAW CID A-A-3004. TYPE I - NYLON, 11/16" MIN. THICKNESS, FOR OPERATION AT UP TO 350 RPM. CLASS 1 - BUFFING, TAN, SZ. 20 - 20". UNIT OF ISSUE IS BOX OF 5. PACKAGED/ PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL

General Services Administration

TUSA MINI KNIFE POINT TIP, BK

General Services Administration

TAPE, MEASURING: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

PERFORATOR 2 HOLETYPE I GRAY

General Services Administration

MARKER, PAINT: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

MOPHEAD,WET: #20, NATURAL COLOR, 4-PLY COTTON BLEND MOPHEAD, 1" HEADBAND, GENERAL CLEANING, USED WITH ANY TYPE MOP HANDLE. NOT WASHABLE. U/I BX (12 EACH)

General Services Administration

BAG, PLASTIC: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

GRINDER,PORTABLE PORTABLE: DRIVE TYPE: ANGULAR DRIVE ANGLE: 90 DEGREES OVERALL LENGTH: 5.75 INCHES HANDLE TYPE:BODY GRIP THROTTLE TYPE: LEVER AIR INLET: 1/4 NPT CHUCK TYPE: COLLET CHUCK SZ: 0.25 INCH OPERATING AIR PRESSURE: 90 PSIOPERATINGAIR CONSUMP

General Services Administration

FAN, CIRCULATING: PLUG STYLE: NORTH AMERICA SPEED ADJUSTMENTS: 2 MINIMUM HEIGHT: 54 INCHES MINIMUM AND 84 INCHES MAX BLADE DIAMETER: 30 INCHES AIR CAPACITY: 8050 CUBIC FEET PER MINUTE (CFM) MAX POWER CONSUMPTION: 270 WATTS VOLTAGE RATING: 120 VOLTS A

General Services Administration

STAPLES

General Services Administration

PLANNER,TACTICAL FIASE:- SEE ATTACHED DOCUMENTFOR DETAIL.

General Services Administration

PEN, BALL-POINT: ITEM NAME PEN, BALL-POINT PEN POINT TYPE FINE CAP INCLUDED UNIT TYPE DESK OR POCKET INK COLOR BLACK BARREL SHAPE ROUND TRIM BAND INCLUDED POCKET CLIP PROVIDED POCKET CLIP MATERIAL STEEL, CORROSION RESISTANT POINT RETRACTABILITY RETRA

General Services Administration

INK,STAMP PAD

General Services Administration

BAR,PRY SNAP-ON INC P/N: 2050

General Services Administration

SCREWDRIVER,FLAT TIYPE I: SCREWDRIVER ASSEMBLY CLASS 1: FLAT TIP STYLE B: GENERAL PURPOSE,FLARED SIDES OVERALL LENGTH: 10 INCHES MINIMUM AND 11-1/2 INCHES MAX BLADE LENGTH: 6 INCHES TIPTHICKNESS: .046 INCH TIP WIDTH: 5/16 INCH BLADEMATERIAL: STEEL HA

General Services Administration

CARTRIDGE, TONER I.A.W. HP P/N CF411A

General Services Administration

SHEARS, STRAIGHT TRIMMERS: MSP - 29,568PLEASE SEE IPD OR LONG DESCRIPTION FOR FURTHER DETAILS. PRODUCT MADE IN CHINA.

General Services Administration

SOCKET, SOCKET WRENCH: TYPE I: SOCKETS (12-POINT) CLASS 1: SOCKETS STYLE A: STANDARD LENGTH SQUARE DRIVE SZ: 1/4 INCH WRENCH OPENING: 1/2 INCH MATERIAL: STEEL COATING: CHROME FEATURES: MANUAL TOOL (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

General Services Administration

PEN, BALL-POINT: ITEM NAME PEN, BALL-POINT OVERALL PEN LENGTH 5.250 INCHES (+/- 0.500 INCHES) PEN POINT TYPE MEDIUM PEN POINT RETRACTABILITY RETRACTABLE UNIT TYPE ILLUSION EXECUTIVE PEN USAGE DESIGN DESK OR POCKET INK COLOR BLACK INK CARTRIDGE REPLAC

General Services Administration

FLATWARE SET

General Services Administration

BAG, PLASTIC: ITEM NAME BAG, PLASTIC, (INTERLOCKING SEAL CLOSURE) OVERALL WIDTH 8.000 INCHES (+ 0.25 INCH TOLERANCE) OVERALL LENGTH 8.000 INCHES (+ 0.25 INCH TOLERANCE) OVERALL THICKNESS 0.002 INCH BREAKING FACTOR 4.3 LBS IN MACHINE DIRECTION, 3.0 LB

General Services Administration

GOGGLES, INDUSTRIAL: DIRECT VENTILATION, COVER STYLE GOGGLES.

General Services Administration

SCREWDRIVER, FLAT TIP

General Services Administration

SATS APPROVED P/N: J7327M

General Services Administration

DISPENSER,SOAP

General Services Administration

BROOM,UPRIGHTS LONG; WOOD OR PLASTICBLOCK; BLOCK LENGTH 6-7/16 INCH; BLOCK WIDTH 2 INCHES; BLOCK THICKNESS 1-1/16 INCHES; PLASTIC FILL WITH FLAGGED ENDS; FILL TRIM LENGTH ANGLE CUTFROM 6.5 INCHES TO 5.25INCHESS; TUBULAR STEELHANDLE IS 46 INCHES LONG

Department of Homeland Security

THIS TASK ORDER PROVIDES DETENTION AND TRANSPORTATION SERVICES AT THE T. DON HUTTO DETENTION CENTER. THIS MODIFICATION OBLIGATES FUNDS TO SUPPORT THE SERVICES AT THE CENTER.

General Services Administration

PAD,ALL WEATHER NOT SEEATTACHED DOCUMENT FOR DETAIL.

General Services Administration

PAPER,COPYING,XEROGHIC PROCESS: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

LOCK PIN SET, COMBINATION TOOL: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

MARKER ASSORTMENT, TUBE TYPE: - SEE ATTACHED DOCUMENT FOR DETAIL.

Department of Homeland Security

THIS CONTRACT PROVIDES DETENTION AND TRANSPORTATION AT EL PASO SERVICE PROCESSING CENTER. THE PURPOSE OF THIS MODIFICATION IS TO UPDATE AN ADMINISTRATIVE ERROR IN THE SYSTEM TO ALLOW FUNDING ON TASK ORDERS.

Environmental Protection Agency

DUE TO DELAYS ON THE PRP, LINE ITEMS 0001EA AND 0003B ARE EXTENDED TO 07/31/2028

Department of Veterans Affairs

WIRELESS PH RECORDER

Department of Homeland Security

THE PURPOSE OF THIS MODIFICATION IS TO EXTEND THE SECTION FOR ONE MONTH USING THE 52.217-8, IN SUPPORT OF DR-4724-HI

General Services Administration

KEY,SOCKET HEAD SCREW SNAP-ON INC P/N: AWM5D

General Services Administration

PEN, BALL-POINT: ITEM NAME PEN, BALL-POINT OVERALL PEN LENGTH 147.3 MILLIMETERS (+/- 12.70 MM) PEN POINT TYPE MEDIUM PEN POINT TIP MATERIAL METALLIC PLATED, NON-CORROSIVE PEN POINT RETRACTABILITY RETRACTABLE UNIT TYPE DESK OR POCKET INK COLOR BLACK I

General Services Administration

SCREWDRIVER, FLAT TIP: TYPE I: SCREWDRIVER ASSEMBLY CLASS 1: FLAT TIP STYLE B: GENERAL PURPOSE, FLARED SIDES BLADE LENGTH: 6 INCHES TIP THICKNESS: .037 INCH TIP WIDTH: 1/4 INCH BLADE MATERIAL: STEEL HANDLE MATERIAL: PLASTIC BLADE COATING: CHROME FEAT

General Services Administration

KIT FIRST AID TY II ESSENTIAL BUSINESS.

General Services Administration

WRENCH, BOX AND OPEN END, COMBINATION: B107.100CAT 6 COMBINATION WRENCHSTYLE 1: CATEGORY 6 TABLE 5.1.1-2M CATEGORY 6 LENGTHS (SI) REGULAR LENGTH OVERALL LENGTH: 89MMMINIMUM AND 145MM MAX WRENCH OPENING: 7MM BOTH ENDS MATERIAL: STEEL COATING: CHROME F

General Services Administration

STAPLES,PAPER FASTE

General Services Administration

SOCKET SET, SOCKET WRENCH: IAW THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.5M-2002. TYPE I: SOCKETS, SINGLE (6-POINT) CLASS 1: REGULAR LENGTH DRIVE SZ: 1/2 INCH FEMALE SQ. DRIVE WRENCH OPENINGS: THE SET SHALL CONSIST OF ONE (1) EACH OF T

General Services Administration

KEY,SOCKET HEAD SCREW SNAP-ON INC P/N: AWL12D

General Services Administration

SHEET METAL TOOLS MSP-18750

General Services Administration

OFFICE CONVENIENCE

General Services Administration

MAT, ABRASSIVE, NON-WOVEN, NON-METALLIC, NYLON, ALUMINUM OXIDE, MAT TYPE, 9.00 INCH WIDTH, 11.00 INCH LENGTH, SHEETS, 280 - 400 GRIT SIZE