Federal Contract Awards

General Services Administration

NOTEBOOK,ALL WEATHE

General Services Administration

TRIMMER PAPER SZ 2

General Services Administration

EASEL,DISPLAY AND T

General Services Administration

GAGE, DEPTH, DIAL INDICATING: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

MARKER ASSORTMENT,T

General Services Administration

KEY, SOCKET HEAD SCREW: IAW ASME B18.3-2003, SOCKET CAP, SHOULDER AND SET SCREWS, HEX AND SPLINE KEYS. KEY SZ: 5/32 INCH SERIES: SHORT EXCEPTION TO STANDARD: MATERIAL: COPPER FEATURES: NON-SPARKLING, NON-MAGNETIC (PARTIAL DESCRIPTION)

General Services Administration

ADAPTER,SOCKET WREN

General Services Administration

CROWFOOT ATTACHMENTKET WRENCH: OVERALL LENGTH: 2-13/16 INCHES SZ: 22 MILLIMETERS DRIVE SZ:1/2 INCH MATERIAL: STEEL COATING: FULL POLISH CHROME (EXCEPTIONS APPLY)(PARTIAL DESCRIPTION)

General Services Administration

RUBBER STAMP, FIXED TYPE: ITEM NAME RUBBER STAMP, FIXED TYPE OVERALL WIDTH 1.000 INCHES OVERALL LENGTH 2.750 INCHES UNIT TYPE CUSTOM STAMP UNIT DESIGN PRE-INKED INK COLOR ASSORTED - BLACK, BLUE, AND RED INK TYPE QUICK-DRY LEGEND TYPE LOWERCASE AND UP

General Services Administration

BOARD,MARKER

General Services Administration

PLASTIC BAG

General Services Administration

BOARD,MARKER

General Services Administration

SOCKET,SOCKET WRENCH MAC TOOLS INC P/N: VD146R

General Services Administration

TOWEL,PAPERIPING, AND POLISHING SOFT PLASTIC SURFACES; PAPER, THREE-PLY MINIMUM, HIGHLY ABSORBENT, NON-ABRASIVE; 14.75 INCHES MINIMUM PER SIDE WITH OVERALL AREA OF MINIMUM OF 250.0 SQUARE INCHES; TENSILE STRENGTH 388.0 OUNCESPER INCH DRY AND 78.0 OUN

General Services Administration

SOCKET,SOCKET WRENCH MAC TOOLS INC P/N: VD146R

General Services Administration

SATS APPROVED P/N: J7327M

General Services Administration

SOCKET,SOCKET WRENCS954H WRENCHES, HAND, TWELVEPOINT, HIGH STRENGTH, THIN WALL TYPE I: SOCKETS(12-POINT) CLASS 1: SOCKETS STYLE A: REGULAR LENGTH OVERALL LENGTH: 3-13/64 INCHES MAX WRENCH OPENING: 1-11/16 INCHES SQUARE DRIVE SZ: 3/4INCH MATERIAL: STE

General Services Administration

FORCEPS,NONSURGICAL

General Services Administration

INSERTER AND REMOVER, ELECTRICAL CONTACT: INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE III, CLASS 2, COMPOSITION B TYPE III: COMBINATION INSTALLING AND REMOVAL TOOL CLASS 2: REAR RELEASE OF CONTACTS COMPOSITION B: PLASTIC CONTACT

General Services Administration

BIT, SCREWDRIVER: TIP SZ: 0.072 INCH OVERALL LENGTH: 4 INCHES MATERIAL: STEEL COATING: OXIDE FEATURES: USED WITH COOPER/XCELITE SERIES 99 HANDLES; SIX SPLINE DRIVER BLADE; MALE STRAIGHT ROUND CENTER, FLATTED ON TWO SIDES (EXCEPTIONS APPLY) (PARTIAL D

General Services Administration

CLEANING COMPOUND,TT BOWL: CONCENTRATED, PRE-PACKAGED TOILET BOWL CLEANER WITH DETERGENTS,CLEANING AGENTS AND SILICA. ONE HUNDRED (100) EACH 1/2 OUNCE WATER SOLUABLE PACKETS PER BOX.IPES AND DRAINS. ONE-HUNDRED (100) EACH 14 GRAMWATER SOLUABLE PACKE

General Services Administration

COPYHOLDER, TYPIST'S: ITEM NAME COPYHOLDER, TYPIST'S ACCOMMODATED PAPER WIDTH 8.500 INCHES ACCOMMODATED PAPER LENGTH 11.00 INCHES COPYHOLDER WIDTH 8.750 INCHES TO 12.00 INCHES COPYHOLDER LENGTH (HEIGHT) 11.25 INCHES TO 14.00 INCHES COPYHOLDER DEPTH S

General Services Administration

HIGH BACK TASK CHAIR W/INTEGRATED HEADREST,FABRIC SEAT, MESH BACK,BLUEBLUE

General Services Administration

SCREWDRIVER, FLAT TIP: TYPE I: SCREWDRIVER ASSEMBLY CLASS 1: FLAT TIP STYLE A: CABINET, STRAIGHT SIDES OVERALL LENGTH: 4-1/2 INCHES MINIMUM AND 5-3/4 INCHES MAX BLADE LENGTH: 2-1/2 INCHES TIP THICKNESS: .022 INCH TIP WIDTH: 9/64 INCH BLADE MATERIAL:

Department of Justice

BJA PEER REVIEW SUPPORT SERVICES - UNILATERAL MOD 2 - CLOSEOUT

General Services Administration

KEY,SOCKET HEAD SCREW SNAP-ON INC P/N: AWM5D

General Services Administration

SCREWDRIVER, FLAT TIP: TYPE I: SCREWDRIVER ASSEMBLY CLASS 1: FLAT TIP STYLE B: GENERAL PURPOSE, FLARED SIDES BLADE LENGTH: 6 INCHES TIP THICKNESS: .037 INCH TIP WIDTH: 1/4 INCH BLADE MATERIAL: STEEL HANDLE MATERIAL: PLASTIC BLADE COATING: CHROME FEAT

General Services Administration

SCREWDRIVER, FLAT TIP: TYPE I: SCREWDRIVER ASSEMBLY CLASS I: FLAT TIP STYLE B: GENERAL PURPOSE; FLARED SIDES TIP THICKNESS: .055 INCH TIP WIDTH: 3/8 INCH BLADE LENGTH: 7 29/32 INCHES OVERALL LENGTH: 13 13/32 INCHES MATERIAL BLADE: STEEL MATERIAL HAND

General Services Administration

KEY,SOCKET HEAD SCREW SNAP-ON INC P/N: AWL12D

General Services Administration

SCREWDRIVER, FLAT TIP: TYPE I: SCREWDRIVER ASSEMBLY CLASS 1: FLAT TIP STYLE B: GENERAL PURPOSE, FLARED SIDES BLADE LENGTH: 6 INCHES TIP THICKNESS: .037 INCH TIP WIDTH: 1/4 INCH BLADE MATERIAL: STEEL HANDLE MATERIAL: PLASTIC BLADE COATING: CHROME FEAT

General Services Administration

DETERGENT,LAUNDRY EFFICIENCY LAUNDRY DETERGENT FORMULATED TO WORK SPECIFICALLY WITH HIGH-EFFICIENCY WASHERS. ONEHUNDRED (100) EACH, THREE QUARTER (3/4)OUNCE PACKETS PER BOX.

General Services Administration

BAR,PRY SNAP-ON INC P/N: 2050

General Services Administration

SATS APPROVED P/N: J7327M

General Services Administration

PEN AND PENCIL COMBO: ITEM NAME PEN AND PENCIL COMBO OVERALL TIP SZ 0.500 MM OVERALL POINT TYPE MEDIUM UNIT TYPE B3 AVIATOR MULTI-FUNCTION PEN UNIT DESIGN PEN AND PENCIL INK COLOR BLACK AND RED BARREL MATERIAL BRASS-PLATED STEEL ERASER INCLUDED ERASE

Department of State

TEMPEST CISCO WEBEX DESK

General Services Administration

REMOVER, INTEGRATED CIRCUIT: TYPE: TONG STYLE, WITH BOTH LEGS TERMINATING IN AN INTERNAL FACING TIP OVERALL LENGTH: 3-57/64 INCHES THICKNESS: 0.025 INCH WIDTH: 0.325 INCH BEND RADIUS: 1 INCH TIP HEIGHT: 1/16 INCH TIP WIDTH: 1/8 INCH MATERIAL: STEEL T

General Services Administration

MARKER ASSORTMENT, TUBETYPE, EXPO DRY ERASE MARKER, 12 PER KIT, PART NO. 83054

General Services Administration

HIGH BACK TASK CHAIR W/ADJUSTABLE HEADREST,FABRIC SEAT, FABRIC BACK,BLUE.

General Services Administration

MIRROR, INSPECTION: IAW GSA PURCHASE DESCRIPTION 5120-01-313-4097. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

Department of Veterans Affairs

FT MISSOULA TASK ORDER FOR GROUNDS MAINTENANCE SERVICES

General Services Administration

LOOSE LEAF BINDERIN/ACC/W INTERIM FEDERALDATED DEC. 16, 1975.

General Services Administration

MOPHEAD,WETL COLOR, 4-PLY COTTON BLEND, 1'' HEADBAND, USEDWITH ANY TYPEMOP HANDLE. U/I BX (12 EACH PER BX))))))))))))))))

General Services Administration

WASTE RECEPTACLEAL: POLYETHYLENE, MOLDED ONE-PIECE AND WATERTIGHT; CAPACITY: 32.0 GALLON NOMINAL; OVERALL HEIGHT: 28.0 INCHES NOMINAL; OVERALL DIAMETER: 22.0 INCHES NOMINAL; COLOR: GRAY; COVER: REMOVABLE, WITH HANDLE AND SHALL SECURELY LOCK; HANDLES:

General Services Administration

SODIUM CARBONATE, ANHYDROUS, TECHNICAL: IAW ASTM D501. ONE HUNDRED POUND DRUM.

General Services Administration

SATS APPROVED P/N: J7327M

General Services Administration

KEY,SOCKET HEAD SCREW SNAP-ON INC P/N: AW8D

General Services Administration

SOCKET,SOCKET WRENCH SNAP-ON INC P/N: TWM10A

General Services Administration

WRENCH,TORQUE

General Services Administration

JACK, HYDRAULIC, HAND: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

FOLDER, FILE: - SEE ATTACHED DOCUMENT FOR DETAIL.