Federal Contract Awards

General Services Administration

REMOVER, PIN: IAW DEPARTMENT OF THE ARMY, US ARMY ELECTRONICS MATERIEL SUPPORT AGENCY, DRAWING NUMBER SCDL-47778 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

General Services Administration

WRENCH,BOX AND OPEN ENDCOMBINATION SEARSINDUSTRIAL SALES (CRAFTSMAN) P/N: 9-42918

General Services Administration

CLIP, PAPER: ITEM NAME CLIP, PAPER OVERALL SHEET CAPACITY 0.125 INCH ITEM SZ NUMBER 1 DESIGN TYPE GEM MATERIAL STEEL SPECIAL FEATURE WON'T MARK PAPER ENVIRONMENTAL PROTECTION STEEL IS MADE WITH CORROSION-RESISTANT FINISH WIRE IS MADE UP OF 90 PERCENT

General Services Administration

TAPE,PRESSURE SENSI ADHESIVE: ITEM NAME TAPE, PRESSURE SENSITIVE ADHESIVE OVERALL WIDTH 3.000 INCHES OVERALL LENGTH 60.00 YARDS OVERALL THICKNESS 0.006 INCHES MINIMUM TENSILE STRENGTH 22.00 PSI TEMPERATURE RATING 250.0 DEGREES FAHRENHEIT UNIT TYPE MA

General Services Administration

PAPER, COPYING, XEROGRAPHIC PROCESS: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

CLIPBOARD, PORTABLE: ITEM NAME CLIPBOARD, PORTABLE OVERALL WIDTH 10.00 INCHES OVERALL LENGTH 16.00 INCHES OVERALL DEPTH 2.250 INCHES ACCOMMODATED SHEET WIDTH 8.500 INCHES ACCOMMODATED SHEET LENGTH 12.00 INCHES OVERALL SHEET CAPACITY 0.500 INCHES UNIT

Department of Agriculture

NITROGEN ANALYZER FOR RAFAEL GARCIA DFFRU

General Services Administration

FORCE CUP, PLUMBER'S: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

WRENCH, BOX: IAW TECHNOLOGY RESEARCH CORPORATION DRAWING NUMBER 29280 REVISION E DATED 02-05-2003. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

General Services Administration

RECORD

General Services Administration

CARTRIDGE,TONERAME CARTRIDGE, TONER I.A.W. XEROX CORPORATION P/N 106R03527 CARTRIDGE TYPE NEW (OEM GENUINE) SPECIAL FEATURE EXTRA-HIGHYIELD TONER CARTRIDGE FOR USE WITH XEROX LASER PRINTERS INCLUDING XEROXC400/C405 COLOR MULTIFUNCTION PRINTERS AND AN

General Services Administration

STAPLES,PAPER FASTE, OFFICE TYPE: - SEE ATTACHED DOCUMENT FOR DETAIL.L.L.

General Services Administration

MARKER ASSORTMENT, TUBE TYPE: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

MAT, ABRASIVE, NYLON, ALUMINUM OXIDE MAT, 9.00 INCH WIDTH, 11.00 INCH LENGTH, 180 GRIT SIZE

General Services Administration

BATTERY, DRY: IAW ANSI C18.1. TYPE II-ALKALINEMANGANESE DIOXIDE, ANSI/NEDA NO.15A, CONSUMERSZ. DESIGNATION ''AA'', NOMINAL VOLTAGE 1.5.UNIT OF ISSUE IS PKG OF4, MAX. AGE ON DELIVERYIS 150 DAYS. EXPIRATIONDATE, MIN. OF 36 MOS.AFTER DATE OF MANUFACTURE

General Services Administration

GLOVES,DISPOSABLE,NITRILE:AMBIDEXTROUS,POWDER- FREE,LATEX-FREE,INDUSTRIAL GRADE,NITRILE GLOVES FOR GENERAL PURPOSE USE. NITRILE SHALL BE SOFT FORMULATION ALLOWS GLOVES TO CONFORM TO HAND. 4 MILS THICK, MIN. MEDIUM, 9 1/2 IN, DISPENSER BOX. U/I BX (10

General Services Administration

TAPE, LABELING: ITEM NAME TAPE, LABELING OVERALL WIDTH 0.500 INCHES OVERALL LENGTH 26.00 FEET USAGE APPLICATION MOST BROTHER P-TOUCH LABELS OVERALL COLOR BLACK CHARACTERS ON WHITE TAPE SURFACE FINISH GLOSSY ADHESIVE TYPE PRESSURE SENSITIVE ADHESIVE L

General Services Administration

INDEX SHEET SET, LOOSE-LEAF BINDER: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

PAD, WRITING PAPER: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

SCREWDRIVER, CROSS TIP: TYPE I: SCREWDRIVER ASSEMBLY CLASS 2: CROSS TIP PHILLIPS (PH) OVERALL LENGTH: 3 INCHES MINIMUM AND 4 INCHES MAX BLADE LENGTH: 1-1/2 INCHES TIP SZ: #2 BLADE MATERIAL: STEEL HANDLE MATERIAL: PLASTIC BLADE COATING: CHROME FEATURE

General Services Administration

SOCKET, SOCKET WRENCH: IAW SOCIETY OF AUTOMOTIVE ENGINEERS AEROSPACE (SAE) STANDARD AS955, METRIC SOCKETS, WRENCHES, HAND TWELVE POINT, HIGH STRENGTH, THIN WALL DATED 2012. TYPE I: METRIC SOCKETS (12 POINT) CLASS 1: METRIC SOCKETS STYLE A: REGULAR LE

General Services Administration

PEN, BALL-POINT: ITEM NAME PEN, BALL-POINT OVERALL PEN SZ 147.0 MM (+/- 12.70 MM) PEN POINT TYPE FINE PEN POINT MATERIAL METALLIC PLATED, NON-CORROSIVE PEN POINT RETRACTABILITY RETRACTABLE UNIT TYPE DESK OR POCKET INK COLOR BLACK INK CARTRIDGE REPLAC

General Services Administration

ALIGNMENT TOOL, ELECTRONIC EQUIPMENT: IAW DEPARTMENT OF THE ARMY SIGNAL CORPS LABORATORY DRAWING NUMBER SC-B-98203, REV A. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

General Services Administration

KNIFE, PUTTY: OVERALL LENGTH: 8-15/32 INCHES BLADE LENGTH: 3-19/32 INCHES BLADE WIDTH: 1-1/4 INCHES BLADE MATERIAL: STEEL FEATURES: FLEXIBLE BLADE; SOFT GRIP HANDLE; SINGLE BEVEL EDGE; HANG HOLE (PARTIAL DESCRIPTION)

General Services Administration

MATTOCK: POINTED END LENGTH: 9-3/4 INCH MINIMUM TO 10-1/4 INCH MAX FLAT END LENGTH: 8-3/4 INCH MINIMUM TO 9-3/4 INCH MAX FLAT END BLADE WIDTH: 3-3/8 INCH MINIMUM TO 3-5/8 INCH MAX OVERALL LENGTH: 18-1/2 INCH MINIMUM TO 19-1/2 INCH MAX EYE SZ: NO. 6 M

General Services Administration

KNIFE, PUTTY: BLADE LENGTH: 3-1/2 INCHES BLADE WIDTH: 1-1/4 INCHES HANDLE LENGTH: 3-3/4 INCHES BLADE MATERIAL: STEEL HANDLE MATERIAL: PLASTIC OR WOOD FEATURES: FLEXIBLE BLADE (PARTIAL DESCRIPTION)

General Services Administration

PORTFOLIO DK BLUESH WT33#

General Services Administration

TAPE,PRESSURE SENSI ADHESIVE: ITEM NAME TAPE, PRESSURE SENSITIVE ADHESIVE OVERALL WIDTH 2.000 INCHES OVERALL LENGTH 60.00 YARDS OVERALL THICKNESS 0.011 INCHES UNIT TYPE MASKING TAPE USAGE FORM ROLL OVERALL COLOR BLACK OVERALL MATERIALPLASTIC, POLYETH

General Services Administration

STAPLES

General Services Administration

CLIP BOARD, TYPE IISIZE 9X15-1/2 INCHESSH WT 23#

General Services Administration

PROTECTOR, DOCUMENT: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

SCREWDRIVER, FLAT TIP: PLEASE SEE IPD FOR FURTHER PRODUCT DETAILS

General Services Administration

DISK, ABRASIVE, SILICONCARBIDE, 120 GRIT, A-WEIGHT PAPER PACKING, PLAIN, FLAT, NO ARBOR HOLE, WITH PRESSURE SENSITIVE ADHESIVE BACKING, 6.00 INCH DISK DIAMETER

General Services Administration

WRENCH, PIPE: OVERALL LENGTH: 18 INCHES MINIMUM PIPE SZ: 1 TO 2 INCH MINIMUM SZ RANGE. MAX WEIGHT: 6 POUND, 4 OUNCE. BENDING MOMENT: 20,000 INCH-POUND MATERIAL: CAST IRON OR STEEL FINISH: PROTECTIVE COATING (PARTIAL DESCRIPTION)

General Services Administration

WRENCH, SOCKET: IAW U.S. ARMY TANK AUTOMOTIVE DRAWING NUMBER 12506195, REVISION A. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

General Services Administration

WRENCH SET, SOCKET: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

PADLOCK

General Services Administration

TAPE PRESSURE SENSITIVE: IN ACCORDANCE WITH ASTMD5330, STANDARD SPECIFICATION FOR PRESSURE SENSITIVE TAPE FOR PACKAGING, FILAMENT REINFORCED,TYPE 2, CLEAR WIDTH 2.00 INCHES, LENGTH 60.0 YARDS, CORE DIAMETER 3.000 INCHES, ADHESIVE LOCATION ONE SIDE.

General Services Administration

CARTRIDGE, TONER: ITEM NAME CARTRIDGE, TONER I.A.W. HEWLETT PACKARD PN W2023A (HP 414A) CARTRIDGE TYPE NEW (OEM GENUINE) SPECIAL FEATURES STANDARD YIELD CARTRIDGE FOR USE WITH HP COLOR LASERJET PRO M454DW, M454DN, MFP M479FDW, MFP M479FDN AND ANY OTH

General Services Administration

HOLDER, SCREWDRIVER BIT, FEMALE SQUARE: DRIVE SZ: 3/8 INCH, SQUARE HOLDS: 1/4 INCH HEX BITS DEPTH: 3/8 INCH (+1/32 INCH) OVERALL LENGTH: 1-1/4 INCHES MAX (PARTIAL DESCRIPTION)

General Services Administration

SHEARS, TAILOR'S: OVERALL LENGTH: 12 INCHES LENGTH OF CUT: 6 INCHES MATERIAL: STEEL COATING: CHROME OR NICKEL-CHROME; LACQUER, VARNISH OR ENAMEL PAINT FEATURES: JAPAN HANDLES; ONE BLADE POINTED, THE OTHER BLUNTED (EXCEPTIONS APPLY) (PARTIAL DESCRIPTI

General Services Administration

SOCKET, SOCKET WRENCH: SEE DESCRIPTION IN CONTRACT

General Services Administration

BIT, SCREWDRIVER: TYPE: WING DRIVE TIP TYPE: HEX CONFIGURATION: ONE PIECE SZ: 4 MM OVERALL LENGTH: 5-3/4 INCHES FEATURES: FITS XCELITE SERIES 99 HANDLE JENSEN TOOL PN 3-719 OR EQUAL (PARTIAL DESCRIPTION)

General Services Administration

TOOL KIT, OFFICE: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

SATS APPROVED P/N:27810

General Services Administration

RECORD

General Services Administration

PAD, WRITING PAPER: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

PAD, WRITING PAPER: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

CHISEL, BLACKSMITH'S COLD: SEE DESCRIPTIONIN CONTRACT

General Services Administration

SOCKET SET, SOCKET WRENCH: IAW THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.5M-2002. TYPE I: SOCKETS, SINGLE (6-POINT) CLASS 1: REGULAR LENGTH DRIVE SZ: 1/2 INCH FEMALE SQ. DRIVE WRENCH OPENINGS: THE SET SHALL CONSIST OF ONE (1) EACH OF T