Federal Contract Awards

General Services Administration

PAD, WRITING PAPER: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

KEY, SOCKET HEAD SCREW: IAW ASME B18.3-2003, SOCKET CAP, SHOULDER AND SET SCREWS, HEX AND SPLINE KEYS. KEY SZ: .05 INCH SERIES: SHORT MATERIAL: STEEL FEATURES: L-STYLE HANDLE (PARTIAL DESCRIPTION) F&R IAW FAR 13.203 QUOTE VALID THROUGH 5/17/2019

General Services Administration

SCREWDRIVER, FLAT TIP: TYPE I: SCREWDRIVER ASSEMBLY CLASS I: FLAT TIP STYLE B: GENERAL PURPOSE; FLARED SIDES TIP THICKNESS: .055 INCH TIP WIDTH: 3/8 INCH BLADE LENGTH: 7 29/32 INCHES OVERALL LENGTH: 13 13/32 INCHES MATERIAL BLADE: STEEL MATERIAL HAND

General Services Administration

KEY,SOCKET HEAD SCREW SNAP-ON INC P/N: AWL12D

General Services Administration

SOCKET,SOCKET WRENCH MAC TOOLS INC P/N: VD146R

General Services Administration

KNIFE, POCKET: OVERALL LENGTH: 8 INCHES CLOSED LENGTH: 4-3/4 INCHES BLADE LENGTH: 3-1/2 INCHES BLADE QUANTITY: 1 LOCK MECHANISM: LOCK-BACK BLADE STYLE: CLIP POINT; PARTIALLY SERRATED HANDLE COLOR: BLACK BLADE MATERIAL: STAINLESS STEEL HANDLE MATERIAL

General Services Administration

2026 WALL CALENDAR

General Services Administration

FOLDER, FILE, HANGING25EACH PER BOX. 1/5 CUT. ASSORTED COLORS, RED,BRIGHT GREEN, YELLOW, BLUE,AND ORANGE. 11.750 X 9.375 INCHES NOMINAL.

General Services Administration

BAG, PLASTIC: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

MARKER, TUBE TYPE: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

CUTTER, BOLT: IAW CID A-A-3047, DATED NOVEMBER 6 1996, AND NOTICE 2, DATED NOVEMBER 30, 2001. CLASS 3: CLIPPER CUT (CLOSE CUTTING) OVERALL LENGTH: 30 INCHES CUTTING CAPACITY: 1/2 INCH MATERIAL: STEEL FEATURES: RUBBER HAND GRIPS; REPLACEMENT JAWS (PAR

Department of Agriculture

BAILEY ENTERPRISES, L.L.C. WAOWF000795 E454

Department of State

MARSH HARBOUR SECURITY UPGRADES

Department of State

CONSTRUCTION SERVICES TO REPLACE THE ROOF OF THE DEPUTY CHIEF OF MISSION RESIDENCE OF THE U.S. EMBASSY ACCRA.

General Services Administration

REFLECTOR SET, HIGHWAY WARNING, TRIANGULAR:SE (SET WITH THREE (3)EACH WARNING DEVICESENCLOSED IN HEAVY DUTYBOX

General Services Administration

CORD,EXTENSION

General Services Administration

FEDERAL SUPPLY SCHEDULE CONTRACT

General Services Administration

EXTENSION, SOCKET WRENCH: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.2 - 2002. TYPE IV: BARS, EXTENSION SQUARE DRIVE SZ: 3/4 INCH OVERALL LENGTH: 13 INCHES MATERIAL: STEEL COATING: BLACK OXIDE FEATURES: RIGID (EXCEPTIONS APPLY) (PARTIAL

General Services Administration

EXTENSION, SOCKET WRENCH: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.2 - 2002. TYPE IV: BARS, EXTENSION SQUARE DRIVE SZ: 3/4 INCH OVERALL LENGTH: 13 INCHES MATERIAL: STEEL COATING: BLACK OXIDE FEATURES: RIGID (EXCEPTIONS APPLY) (PARTIAL

General Services Administration

BAG, TOOL: OVERALL LENGTH: 19-1/2 INCHES OVERALL HEIGHT: 8-1/2 INCHES OVERALL WIDTH: 6 INCHES MATERIAL: NYLON DUCK FEATURES: 2 POCKETS, SLIDE FASTENER CLOSURE, 2 NYLON WEBBING HANDLES NIB/NISH P/N 5140-00-473-6256 (PARTIAL DESCRIPTION)

General Services Administration

DETERGENT,GENERAL PSE: GENERAL PURPOSE SPRAY-ON, WIPE-OFF, HARD SURFACE CLEANER/DEGREASER THAT CUTS AWAY GREASE, DIRT, SOAP SCUM, FOOD STAINS AND FINGERPRINTS FROM MOST SURFACES. TWELVE (12) EACH, TWENTY-TWO (22) OUNCE PUMP-SPRAY CONTAINER.

Department of State

FACILITY MANAGEMENT SUPPORT SERVICES.

General Services Administration

SEAL, ANTIPILFERAGE, CAR/BALL END SEAL,TYPE 9, NOT LESS THAN 6-INCHES, LENGTH, NOT LESS THAN .3 INCHES WIDTH, SHALL BE MARKED WITH "US" AND CONSECUTIVE SERIAL NUMBERS; SERIAL NUMBERS SHALL BE SELECTED BY THE SUPPLIER, BUT SHALL NOT BE DUPLICATED; AGE

General Services Administration

BELT, HIGH VISIBILITY: DAYTIME & NIGHTTIME. 2" WIDE AND FROM 28 IN. TO 54 IN. LONG. NEON YELLOW FLUORESCENT ELASTIC MATERIAL WITH BAND OF SILVER MATERIAL TO THE MIDDLE.

General Services Administration

RUBBER STAMP, FIXED TYPE: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

HAND CLEANER, GOOP MULTIPURPOSE P/N 644.5 LB CONTAINER

General Services Administration

PAPER, COPYING, XEROGRAPHIC PROCESS: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

PAPER,WRITING,WHITE,SIZE8-1/2 X 11''

Department of Justice

ELECTRONIC PROMOTION ASSESSMENT SYSTEM

General Services Administration

PERSONAL DESK KIT: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

SCREWDRIVER, CROSS TIP: STANDARD INCORPORATES THE FOLLOWING STANDARDS INTO ONE. B107.600 STANDARD USE KEY FIELD CODE: B107.15 FLAT TIP SCREWDRIVERS 1B107.15 B107.26 SCREWDRIVER BITS, HAND DRIVEN 1B107.26 B107.30 CROSS TIP SCREWDRIVERS 1B107.30 B107.3

General Services Administration

DRILL, TWIST: IAW NATIONAL AEROSPACE STANDARD NAS 907, DRILLS, HIGH SPEED STEEL (& COBALT) 1/16 INCH THRU 1.00 INCH, REVISION 11, LIST OF CURRENT SHEETS, DATED 10 FEBRUARY 2006. TYPE J: JOBBER & AIRCRAFT EXTENSION LENGTHS SZ: WIRE GAGE SZ 27 CUTTING

General Services Administration

TAPE,PRESSURE SENSI

General Services Administration

CLIP,PAPER

General Services Administration

SOCKET, SOCKET WRENCH: IAW ASME B107.33M-2002 SOCKET WRENCHES, IMPACT (METRIC SERIES) DATED MARCH 5, 2003 TYPE I: IMPACT SOCKETS (6-POINT) SQUARE DRIVE SZ: 3/4 INCH WRENCHING OPENING: 33MM MATERIAL: STEEL COATING: OXIDE (EXCEPTIONS APPLY) (PARTIAL DE

General Services Administration

SOCKET SET, SOCKET WRENCH: IAW THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.5M-2002. TYPE I: SOCKETS, SINGLE (6-POINT) CLASS 1: REGULAR LENGTH DRIVE SZ: 1/2 INCH FEMALE SQ. DRIVE WRENCH OPENINGS: THE SET SHALL CONSIST OF ONE (1) EACH OF T

General Services Administration

BAG, PLASTIC: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

PEN, BALL-POINT: ITEM NAME PEN, BALL-POINT OVERALL PEN LENGTH 147.3 MILLIMETERS (+/- 12.70 MM) PEN POINT TYPE MEDIUM PEN POINT TIP MATERIAL METALLIC PLATED, NON-CORROSIVE PEN POINT RETRACTABILITY RETRACTABLE UNIT TYPE DESK OR POCKET INK COLOR BLACK I

General Services Administration

HAMMER, HAND - SEE DESCRIPTION IN THE CONTRACT

Department of State

BPA CALL FOR OIG INSPECTION AND EVALUATION SERVICES.

General Services Administration

FILTER CARTRIDGE,50 MICRON,40 GPM,40 H

General Services Administration

TAPE PKGG 2 IN WRED

Department of State

PROFESSIONAL SUPPORT - STAFF AUGMENTATION TASK ORDER

Department of State

IT SERVICES - PROVIDES FUNDING FOR PERFORMANCE THROUGH JUNE 30, 2023

Department of Justice

CIRCUIT 8 D44 - FY 2026 CSO PROGRAM FUNDING

Department of Veterans Affairs

ACQUISITION SUPPORT SERVICES.

Department of State

VACUUM

General Services Administration

SHIPPING AND STORAG

Department of Veterans Affairs

GROUNDS MAINTENANCE SERVICES AT THE ABRAHAM LINCOLN NATIONAL CEMETERY

General Services Administration

SCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE HOLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE RAZOR BLADE. BLADE HOUSING WIDTH: 1-5/8 INCH; TOLERANCE: 0.125 INCH BLADE HOUSING THICKNESS: 1/4 INCH; TOLERANCE: 0.0625 INCH HANDLE MATERIAL: SHALL BE MET