Federal Contract Awards

General Services Administration

SHREDDER - P/N 2605SMC

General Services Administration

BOOK, MEMORANDUM: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

BAG, TOOL, ENVELOPE TYPE: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

PADLOCKRADE-2, CORROSION RESISTANT, RECTANGULARSHAP, SOLID OR LAMINATED, STEEL, CASE HARDENED STEEL SHACKLE, 2-KEYS PERLOCK,KEYED DIFFERENT, 1.00 INCH CASE THICKNESS,1.00-1.625 INSIDE VERTICALSHACKLE CLEARANCE, .750- .875 INCH HORIZONTALSIDESHACKLE C

General Services Administration

PENCIL, MECHANICAL: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

EXTENSION,SOCKET WRENCH SNAP-ON INC P/N: SXW2

General Services Administration

SOCKET, SOCKET WRENCH: IAW ASME B107.33M-2002 SOCKET WRENCHES, IMPACT (METRIC SERIES) DATED MARCH 5, 2003 TYPE I: IMPACT SOCKETS (6-POINT) SQUARE DRIVE SZ: 3/4 INCH WRENCHING OPENING: 33MM MATERIAL: STEEL COATING: OXIDE (EXCEPTIONS APPLY) (PARTIAL DE

General Services Administration

SCISSOR, SPRING ACTION: MULTI-PURPOSE, SPRING-ACTION, FLAT BOTTOM STYLE SCISSORS. SCISSORS SHALL BE SHARP AND CAPABLE OF CUTTING MULTIPLE LAYERS OF FABRIC, STRING, PAPER, CONSTRUCTION PAPER AND CARDBOARD. HANDLE DESIGN: THE SCISSORS SHALL HAVE ERGONO

General Services Administration

TOWEL,PAPERIPING, AND POLISHING SOFT PLASTIC SURFACES; PAPER, THREE-PLY MINIMUM, HIGHLY ABSORBENT, NON-ABRASIVE; 14.75 INCHES MINIMUM PER SIDE WITH OVERALL AREA OF MINIMUM OF 250.0 SQUARE INCHES; TENSILE STRENGTH 388.0 OUNCESPER INCH DRY AND 78.0 OUN

General Services Administration

DUST REMOVER,COMPREGAS: REMOVE DUST, DIRT&OTHER MATTER ON KEYBOARDS, PRINTERS & OTHERSURFACES. OZANE SAFE. TRIGGEROPERATED NOZZLE. NON-FLAMMAVLE AND VOC COMPLIANT. SKILLCRAFT P/N 894002. SIX (6) TEN (10)OUNCESCANS IN A BOX.

General Services Administration

RECORD

General Services Administration

BINDER, LOOSE-LEAF, COVER MATERIAL-PLASTIC,VINYLSLANT D RING, END LEVERLOCKING DEVICE, 3 INCHCAPACITY RATING, FASTENER QTY - 3, 8 X 11, IN-SIDE FRONT AND BACK POCKETS, CLEAR OVERLAY ONFRONT,BACK AND SPINE, RECYCLED MATERIAL,

General Services Administration

BAG, TOOL: OVERALL LENGTH: 19-1/2 INCHES OVERALL HEIGHT: 8-1/2 INCHES OVERALL WIDTH: 6 INCHES MATERIAL: NYLON DUCK FEATURES: 2 POCKETS, SLIDE FASTENER CLOSURE, 2 NYLON WEBBING HANDLES NIB/NISH P/N 5140-00-473-6256 (PARTIAL DESCRIPTION)

General Services Administration

MULTI-TOOL, FOLDING, POCKET: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

SCREWDRIVER, CROSS TIP: STANDARD INCORPORATES THE FOLLOWING STANDARDS INTO ONE. B107.600 STANDARD USE KEY FIELD CODE: B107.15 FLAT TIP SCREWDRIVERS 1B107.15 B107.26 SCREWDRIVER BITS, HAND DRIVEN 1B107.26 B107.30 CROSS TIP SCREWDRIVERS 1B107.30 B107.3

General Services Administration

KEY,SOCKET HEAD SCREW SNAP-ON INC P/N: AWM5D

General Services Administration

SOCKET, SOCKET WRENCH: IAW ASME B107.33M-2002 SOCKET WRENCHES, IMPACT (METRIC SERIES) DATED MARCH 5, 2003 TYPE I: IMPACT SOCKETS (6-POINT) SQUARE DRIVE SZ: 3/4 INCH WRENCHING OPENING: 33MM MATERIAL: STEEL COATING: OXIDE (EXCEPTIONS APPLY) (PARTIAL DE

General Services Administration

INSERTER AND REMOVER, PNEUMATIC TIRE: BORE: STANDARD OVERALL LENGTH: 3-1/4 INCHES HANDLE: HEXAGON BLADE: ROUND, SLOTTED MATERIAL: STEEL (PARTIAL DESCRIPTION)

General Services Administration

FOLDER, FILE: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

GLOVES,MEN'S AND WOMEN'S SIZE LARGE. U/I PG (5 PAIR PER PG), MECHANIX WEAR GVMP-PKF55-010, CAMELBAK IMPACT CT GLOVES MPCT05-10, OR EQUAL.

General Services Administration

CORD,FIBROUS

General Services Administration

BRUSH,WIRE,SCRATCH

General Services Administration

MOPHEAD,WET; 18 INCHES LONG; 6 INCHES WIDE; WHITE WITH SCRUBBING STRIPSAND GREEN BORDER: ATTACHES TO 16 INCH FRAME FLATMOPS WITHHOOK AND LOOPBACKING: USE WITH FLAT MOPNSNS 7920-01-574-8715 AND 7920-01-574-87181-574-8718

General Services Administration

PAN,BAKING AND ROAS

General Services Administration

SOCKET,SOCKET WRENCH MAC TOOLS INC P/N: VD146R

General Services Administration

CLIPBOARD FILE: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

RECORD

General Services Administration

LOCKER,CELL PHONE

General Services Administration

PORTFOLIO DK BLUESH WT33#

General Services Administration

WRENCH, PLIER: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.24 AS CONTAINED IN ASME B107.500-2010; THIS DOCUMENT INCORPORATES AND INCLUDES THE REVISIONS OF PRIMARY STANDARD B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.22, B1

General Services Administration

FUNNEL

General Services Administration

HANDLE,ACME THREADE

General Services Administration

KEY,SOCKET HEAD SCREW SNAP-ON INC P/N: AWL12D

General Services Administration

PEN,ALL WEATHERTTACHED DOCUMENT FOR DETAIL.AIL.AIL.

General Services Administration

FIELD BOOK AND COVEEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

KEY SET, SOCKET HEAD SCREW: IAW ASME B18.3-2003, SOCKET CAP, SHOULDER AND SET SCREWS, HEX AND SPLINE KEYS. HANDLE TYPE: L-STYLE CONTAINER TYPE: WRAP, ROLL, ENVELOPE OR POUCH KEY CHARACTERISTIC: CONTAINS 20 HEX KEYS SZ - 0.028, 0.035, 0.05, 1/16, 5/64

General Services Administration

SCREWDRIVER, FLAT TIP: TYPE I: SCREWDRIVER ASSEMBLY CLASS 1: FLAT TIP STYLE B: GENERAL PURPOSE, FLARED SIDES BLADE LENGTH: 6 INCHES TIP THICKNESS: .037 INCH TIP WIDTH: 1/4 INCH BLADE MATERIAL: STEEL HANDLE MATERIAL: PLASTIC BLADE COATING: CHROME FEAT

General Services Administration

BAG, DUCT TRANSPORT: ITEM NAME BAG, DUCT TRANSPORT I.A.W. DHS SYSTEMS LLC-P/N A602126 OR EQUAL COMMERCIAL OVERALL LENGTH 27.00 INCHES OVERALL DIAMETER 19.00 INCHES ACCOMMODATED DUCT LENGTH 15.00 FEET (COLLAPSIBLE DUCT) ACCOMMODATED DUCT DIAMETER 16.0

Department of Agriculture

SILVER-NICKEL LOGGING, L.L.C. WAOWF000795 E195

General Services Administration

VALVE TOOL, DEFLATOR: PRESSURE CAPACITY: 3500 PSI, MAX OVERALL LENGTH: 2-1-/6 INCHES THREAD SZ: 3/8 INCH OUTSIDE DIAMETER: 7/16 INCH CONSISTS: BODY, STEM AND CAP MATERIAL: MACHINED STEEL OR ALUMINUM FEATURES: KNURLED SURFACES FOR GRIPPING AND PROPER

General Services Administration

GAGE,DEPTH,TIRE TRE OVERALL LENGTH: 3-1/2 INCHES CALIBRATION RANGE: 0 TO 1 INCH GRADUATIONUNITS: 1/32 INCH INDICATING SLEEVE SHAPE: ROUNDMATERIAL: BRASS COATING: CHROME FEATURES: POCKET CLIP (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

General Services Administration

PAPER, COPYING, XEROGRAPHIC PROCESS: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

PAPER, COPYING, XEROGRAPHIC PROCESS: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

PENCIL, MECHANICAL: ITEM NAME PENCIL, MECHANICAL PENCIL TIP SZ 0.7 MM OVERALL ERASER LENGTH 36.50 MM PENCIL POINT RETRACTABILITY RETRACTABLE DOUBLE POINT NOT PROVIDED MECHANISM TYPE CLUTCH ACTION BARREL COLOR BLACK OPERATING MECHANISM TYPE AUTOMATIC

General Services Administration

BAR,PRY SNAP-ON INC P/N: 2050

General Services Administration

PROTECTOR, DOCUMENT: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

NOTEBOOK,ALL WEATHE

General Services Administration

BOARD,MARKER

General Services Administration

RECORD

General Services Administration

STAPLER, PAPER FASTENING, OFFICE: ITEM NAME STAPLER, PAPER FASTENING OVERALL LENGTH 6.000 INCHES OVERALL LEG LENGTH 0.250 INCHES OVERALL CROWN WIDTH 0.500 INCHES OVERALL THROAT SZ 3.500 INCHES STAPLING SHEET CAPACITY 30 MAX USAGE DESIGN PREFORMED STA