Federal Contract Awards

Department of Justice

CIRCUIT 7 D90 - FY 2026 CSO PROGRAM FUNDING

Department of Health and Human Services

HAB82 C 6391. BEST PRACTICES FOR BRAIDED FUNDING.

General Services Administration

EXTENSION, SOCKET WRENCH: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.2 - 2002. TYPE IV: BARS, EXTENSION SQUARE DRIVE SZ: 3/4 INCH OVERALL LENGTH: 13 INCHES MATERIAL: STEEL COATING: BLACK OXIDE FEATURES: RIGID (EXCEPTIONS APPLY) (PARTIAL

General Services Administration

DISPENSER, PRESSURE SENSITIVE ADHESIVE TAPE: ITEM NAME DISPENSER, PRESSURE SENSITIVE ADHESIVE TAPE OVERALL WIDTH 2.0000 INCHES OVERALL LENGTH 2160.0 INCHES OVERALL INSIDE CORE DIAMETER 3.0000 INCHES DISPENSER COLOR BLUE DISPENSER MATERIAL PLASTIC ADH

Department of State

EQUIPMENT FOR ANTITERRORISM TRAINING ATA JO24RTCEO01 JORDAN EO EIC CONSUMABLES THE PURPOSE OF THIS PR IS TO ORDER LAW ENFORCEMENT TRAINING AIDS FOR DS/ATA

Department of State

R/PPR SOCIAL MEDIA MANAGEMENT CONSULTING SERVICES

Department of Housing and Urban Development

EIS IT DATA SUPPORT SERVICES IN SUPPORT OF HUD/OCIO

Department of Veterans Affairs

MOD P00005 EXERCISED OPTION YEAR FOUR (4) | NATIONAL CEMETERIES NATIONWIDE - INTERPRETIVE SIGNS: EXERCISE OPTION YEAR 4

General Services Administration

PLIERS, SLIP JOINT: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.23 AS CONTAINED IN ASME B107.500-2010; THIS DOCUMENT INCORPORATES AND INCLUDES THE REVISIONS OF PRIMARY STANDARD B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.2

General Services Administration

FEDERAL SUPPLY SCHEDULE CONTRACT

General Services Administration

SCREWDRIVER, FLAT TIP: TYPE I: SCREWDRIVER ASSEMBLY CLASS 1: FLAT TIP STYLE B: GENERAL PURPOSE, FLARED SIDES BLADE LENGTH: 6 INCHES TIP THICKNESS: .037 INCH TIP WIDTH: 1/4 INCH BLADE MATERIAL: STEEL HANDLE MATERIAL: PLASTIC BLADE COATING: CHROME FEAT

General Services Administration

SCREWDRIVER, CROSS TIP: STANDARD INCORPORATES THE FOLLOWING STANDARDS INTO ONE. B107.600 STANDARD USE KEY FIELD CODE: B107.15 FLAT TIP SCREWDRIVERS 1B107.15 B107.26 SCREWDRIVER BITS, HAND DRIVEN 1B107.26 B107.30 CROSS TIP SCREWDRIVERS 1B107.30 B107.3

General Services Administration

BAG,PLASTIC

General Services Administration

THE PURPOSE OF THIS MODIFICATION IS TO OBLIGATE FUNDING.

General Services Administration

THE PURPOSE OF THIS MODIFICATION IS TO OBLIGATE FUNDING TO THE TASK ORDER.

Department of State

PALLET RACK WIRE DECKING

General Services Administration

KEY,SOCKET HEAD SCREW SNAP-ON INC P/N: AW8D

General Services Administration

SHREDDER - P/N 2605SMC

General Services Administration

CLEANING SOLUTION,PLAIN: READY-TO-USE (RTU) BATHROOM CLEANER FOR USE ON TOILET BOWLS, URINALS, SHOWERS, POROCELAIN, CERAMIC, FIBERGLASS AND SIMILIAR HARD SURFACES. TWELVE (12) THIRTY-TWO(32) OUNCE CONTAINERS PER BOX.OX.

General Services Administration

TABLE, FOLDING, CHARCOAL, 18" X 72"

General Services Administration

FOLDER, FILE: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

PADLOCK

General Services Administration

SOCKET SET, SOCKET WRENCH: IAW THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.5M-2002. TYPE I: SOCKETS, SINGLE (6-POINT) CLASS 1: REGULAR LENGTH DRIVE SZ: 1/2 INCH FEMALE SQ. DRIVE WRENCH OPENINGS: THE SET SHALL CONSIST OF ONE (1) EACH OF T

General Services Administration

EXTENSION,SOCKET WRENCH SNAP-ON INC P/N: SXW2

General Services Administration

CLEANING COMPOUND,TT BOWL: CONCENTRATED, PRE-PACKAGED TOILET BOWL CLEANER WITH DETERGENTS,CLEANING AGENTS AND SILICA. ONE HUNDRED (100) EACH 1/2 OUNCE WATER SOLUABLE PACKETS PER BOX.IPES AND DRAINS. ONE-HUNDRED (100) EACH 14 GRAMWATER SOLUABLE PACKE

General Services Administration

SHREDDER - P/N 2605SMC

General Services Administration

FAN, CIRCULATING, COLUMN, ELECTRIC OSCILLATING

General Services Administration

PEN AND PENCIL COMBO: ITEM NAME PEN AND PENCIL COMBO OVERALL TIP SZ 0.500 MM OVERALL POINT TYPE MEDIUM UNIT TYPE B3 AVIATOR MULTI-FUNCTION PEN UNIT DESIGN PEN AND PENCIL INK COLOR BLACK AND RED BARREL MATERIAL BRASS-PLATED STEEL ERASER INCLUDED ERASE

General Services Administration

FINGER,MECHANICAL

General Services Administration

TOWEL,PAPER

General Services Administration

SCREWDRIVER, FLAT TIP: TYPE I: SCREWDRIVER ASSEMBLY CLASS I: FLAT TIP STYLE B: GENERAL PURPOSE; FLARED SIDES TIP THICKNESS: .055 INCH TIP WIDTH: 3/8 INCH BLADE LENGTH: 7 29/32 INCHES OVERALL LENGTH: 13 13/32 INCHES MATERIAL BLADE: STEEL MATERIAL HAND

General Services Administration

DIE, THREAD CUTTING: SEE DESCRIPTION INCONTRACT

General Services Administration

PLASTIC BAGS

General Services Administration

KEY, SOCKET HEAD SCREW: IAW ASME B18.3-2003, SOCKET CAP, SHOULDER AND SET SCREWS, HEX AND SPLINE KEYS. KEY SZ: 5/16 INCH SERIES: LONG MATERIAL: STEEL COATING: CHROME (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

General Services Administration

INDICATOR, DIAL: IN ACCORDANCE CID A-A-2348B, DATED 07/30/91. TYPE B: SPINDLE PERPENDICULAR TO DIAL FROM BACK OF CASE. THE HOLDING ROD SHALL BE 1/4 INCH DIAMETER BY 1-1/2 INCHES LONG, MINIMUM, AS MEASURED FROM THE BEZEL EDGE TO THE END OF THE ROD. ST

General Services Administration

SHREDDER - P/N 2605SMC

General Services Administration

WALLET,INDEX CARDE ATTACHED DOCUMENT FORDETAIL.ETAIL.

General Services Administration

SOCKET SET, SOCKET WRENCH: IAW THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.5M-2002. TYPE I: SOCKETS, SINGLE (6-POINT) CLASS 1: REGULAR LENGTH DRIVE SZ: 1/2 INCH FEMALE SQ. DRIVE WRENCH OPENINGS: THE SET SHALL CONSIST OF ONE (1) EACH OF T

General Services Administration

BAG, PLASTIC: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

DISPLAY BOARD, VISIBLE RECORD: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

PLIERS, DIAGONAL CUTTING: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.11 AS CONTAINED IN ASME B107.500-2010; THIS DOCUMENT INCORPORATES AND INCLUDES THE REVISIONS OF PRIMARY STANDARD B107.11, B107.13, B107.16, B107.18, B107.19, B107.20,

General Services Administration

SOCKET, SOCKET WRENCH: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.2 - 2002. TYPE: I SOCKETS (6-POINT) CLASS: 2 LONG LENGTH SQUARE DRIVE SZ: 1/2 INCH WRENCH OPENING: 15/16 INCH MATERIAL: STEEL COATING: BLACK OXIDE (EXCEPTIONS APPLY) (PAR

General Services Administration

BAG, TOOL: OVERALL LENGTH: 19-1/2 INCHES OVERALL HEIGHT: 8-1/2 INCHES OVERALL WIDTH: 6 INCHES MATERIAL: NYLON DUCK FEATURES: 2 POCKETS, SLIDE FASTENER CLOSURE, 2 NYLON WEBBING HANDLES NIB/NISH P/N 5140-00-473-6256 (PARTIAL DESCRIPTION)

General Services Administration

PLIERS, SLIP JOINT: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.23 AS CONTAINED IN ASME B107.500-2010; THIS DOCUMENT INCORPORATES AND INCLUDES THE REVISIONS OF PRIMARY STANDARD B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.2

General Services Administration

BAG, TOOL: OVERALL LENGTH: 19-1/2 INCHES OVERALL HEIGHT: 8-1/2 INCHES OVERALL WIDTH: 6 INCHES MATERIAL: NYLON DUCK FEATURES: 2 POCKETS, SLIDE FASTENER CLOSURE, 2 NYLON WEBBING HANDLES NIB/NISH P/N 5140-00-473-6256 (PARTIAL DESCRIPTION)

General Services Administration

PLIERS, SLIP JOINT: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.23 AS CONTAINED IN ASME B107.500-2010; THIS DOCUMENT INCORPORATES AND INCLUDES THE REVISIONS OF PRIMARY STANDARD B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.2

General Services Administration

EXTINGUISHER,FIRE

General Services Administration

SOCKET,SOCKET WRENCH MAC TOOLS INC P/N: VD146R

General Services Administration

PEN, BALL-POINT: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

MULTI-TOOL, FOLDING, POCKET: - SEE ATTACHED DOCUMENT FOR DETAIL.