Federal Contract Awards

General Services Administration

PLIERS, SLIP JOINT: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.23 AS CONTAINED IN ASME B107.500-2010; THIS DOCUMENT INCORPORATES AND INCLUDES THE REVISIONS OF PRIMARY STANDARD B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.2

General Services Administration

SHEARS, STRAIGHT TRIMMERS: MSP - 29,568PLEASE SEE IPD OR LONG DESCRIPTION FOR FURTHER DETAILS. PRODUCT MADE IN CHINA.

Department of State

SCA/STA STAFFING SUPPORT - EXERCISE OPTION/ADD FUNDING

Department of State

NOVETTA

General Services Administration

BAG, TOOL: OVERALL LENGTH: 19-1/2 INCHES OVERALL HEIGHT: 8-1/2 INCHES OVERALL WIDTH: 6 INCHES MATERIAL: NYLON DUCK FEATURES: 2 POCKETS, SLIDE FASTENER CLOSURE, 2 NYLON WEBBING HANDLES NIB/NISH P/N 5140-00-473-6256 (PARTIAL DESCRIPTION)

General Services Administration

CHART,CALENDAR PLANTURES: DURABLE PORCELAIN ENAMEL STEEL SURFACE; FOR USE WITH DRY ERASE MARKERS OR MAGNETIC ACCESSORIES, MARKED WITHFIVE COLUMNS IN ENAMEL SILK-SCREENED INK; ANODIZED ALUMINUM FRAME; SZ 11IN X 14 INIS DESIGNEDFOR CONVENIENCE AND MOBI

General Services Administration

PADLOCK SET SHAPE, SOLID BODY, CORROSION RESISTANT STEEL OR CARBON STEEL, CASE HARDENED STEEL SHACKLE, LOCKS KEYED ALIKE, 1-KEY PER LOCK, 2-ADDITIONAL KEYS PER SET, 1.170 INCH VERTICAL SHACKLE CLEARANCE, .750 - .779INCH HORIZONTAL SHACKLECLEARANCE,.3

General Services Administration

PAPER, COPYING, XEROGRAPHIC PROCESS: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

PLIERS, SLIP JOINT: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.23 AS CONTAINED IN ASME B107.500-2010; THIS DOCUMENT INCORPORATES AND INCLUDES THE REVISIONS OF PRIMARY STANDARD B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.2

General Services Administration

BAG, PLASTIC: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

95 KEY HOOKS

Department of Veterans Affairs

TERMINATION OF VHA INTEGRATED HEALTHCARE TRANSFORMATION (IHT) IDIQ CONTRACT- TASK ORDER FOR TECHNICAL WRITING SUPPORT SERVICES. EO: RADICAL TRANSPARENCY ABOUT WASTEFUL SPENDING

General Services Administration

FUEL, ENGINE PRIMER (COLD STARTING, PRESSURIZEDCONTAINERS): ENGINE PRIMER FUEL (STARTING FLUID)IN AN AEROSOL FORM. TWELVE (12) EACH AEROSOL CANS IN A BOX.5 CANS PER BOX.

General Services Administration

FEDERAL SUPPLY SCHEDULE CONTRACT

General Services Administration

SOCKET, SOCKET WRENCH: IAW ASME B107.33M-2002 SOCKET WRENCHES, IMPACT (METRIC SERIES) DATED MARCH 5, 2003 TYPE I: IMPACT SOCKETS (6-POINT) SQUARE DRIVE SZ: 3/4 INCH WRENCHING OPENING: 33MM MATERIAL: STEEL COATING: OXIDE (EXCEPTIONS APPLY) (PARTIAL DE

General Services Administration

SOCKET, SOCKET WRENCH: IAW ASME B107.33M-2002 SOCKET WRENCHES, IMPACT (METRIC SERIES) DATED MARCH 5, 2003 TYPE I: IMPACT SOCKETS (6-POINT) SQUARE DRIVE SZ: 3/4 INCH WRENCHING OPENING: 33MM MATERIAL: STEEL COATING: OXIDE (EXCEPTIONS APPLY) (PARTIAL DE

General Services Administration

MARKER, TUBE TYPE: ITEM NAME MARKER, TUBE TYPE OVERALL MARKER LENGTH 5.100 INCHES (INCLUDING CAP) MARKER BARREL DIAMETER 0.310 INCH MINIMUM TO 0.500 INCH MAX MARKER POINT TYPE FINE MARKER TIP REPLACEABILITY NONREPLACEABLE FEED TYPE CAPILLARY INK TYPE

General Services Administration

HOLDER,SCREWDRIVER USEDWITH SNAP-ON SGDMRC SERIES SCREWDRIVER HANDLES OVERALL LENGTH: 5 INCHESHEX SHANK WIDTH: 1/4 INCHMATERIAL: STEELFEATURES:MAGNETIC (PARTIAL DESCRIPTION)

General Services Administration

READY KIT - COMBAT CARDS, TOP-SPIRAL NOTEBOOKS,NOTEBOOK KIT, & PENS, J.L. DARLING CORP P/N READY-KIT

General Services Administration

SCREWDRIVER SET,FLA

General Services Administration

MOPPING OUTFIT,FLOOR: CONSISTING OF A BUCKET WITH CASTER AND A COMPATIBLE WRINGER. PLASTIC BUCKET 26-35 QTS. CORROSION RESISTANT METAL BAIL W/FOUR SWIVEL CASTERS, YELLOW. WRINGER SIDEWARD PRESS MADE OF PLASTIC. CORROSION RESISTTANT METAL HANDLES AND

General Services Administration

SHREDDER - P/N 2605SMC

General Services Administration

TAPE,PRESSURE SENSI

General Services Administration

SOCKET, SOCKET WRENCH: IAW ASME B107.33M-2002 SOCKET WRENCHES, IMPACT (METRIC SERIES) DATED MARCH 5, 2003 TYPE I: IMPACT SOCKETS (6-POINT) SQUARE DRIVE SZ: 3/4 INCH WRENCHING OPENING: 33MM MATERIAL: STEEL COATING: OXIDE (EXCEPTIONS APPLY) (PARTIAL DE

General Services Administration

BAR, SOCKET WRENCH HANDLE: IAW ORDNANCE CORPS, DEPARTMENT OF THE ARMY, ENGINEERING AND INSPECTION SECTION, DRAWING NUMBER TKPX1, DATED 7 JANUARY 1953. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

General Services Administration

PLATE,PAPER

Department of State

ICASS GASOLINE FOR OFFICIAL VEHICLES

General Services Administration

BAR,PRY SNAP-ON INC P/N: 2050

General Services Administration

WRENCH SET, SOCKET: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

SHREDDER - P/N 2605SMC

General Services Administration

BAG, PLASTIC: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

CLEANING COMPOUND, SOLVENT-DETERGENT: CONCENTRATED, NON-ABRASIVE, NON-HAZARDOUS, NON-FLAMMABLE, NON-CORROSIVE GENERAL PURPOSE CLEANER/DEGREASER. MEETS USDA BIO-BASED REQUIREMENTS. VOC COMPLIANT. ONE (1) EACH FIFTY-FIVE (55) GALLON PLASTIC DRUM.

General Services Administration

MARKER, TUBE TYPE: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

SOCKET SET, SOCKET WRENCH: IAW THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.5M-2002. TYPE I: SOCKETS, SINGLE (6-POINT) CLASS 1: REGULAR LENGTH DRIVE SZ: 1/2 INCH FEMALE SQ. DRIVE WRENCH OPENINGS: THE SET SHALL CONSIST OF ONE (1) EACH OF T

General Services Administration

SCREWDRIVER, FLAT TIP

General Services Administration

THUMBTACK: ITEM NAME THUMBTACK HEAD DIAMETER 0.500 INCHES PIN LENGTH 0.312 INCHES OVERALL MATERIAL STEEL, NICKEL PLATEDUNIT PACKAGE FORM BOX UNIT PACKAGE QUANTITY 100THUMBTACKS PER BOX PKG/PK: ONE HUNDRED (100) THUMBTACKS SHALL BE PACKAGEDIN A BOX IA

General Services Administration

PLASTIC BAG

General Services Administration

DOD EXPLOSIVES SAFETY BOARD MODIFICATION TO EXERCISE SURGE CLIN AND INCREMENTALLY FUND.

General Services Administration

POUCH, MECHANIC'S TOOLS: IAW U.S. AIR FORCE DRAWING NUMBER 50J8016, REV. F, DATED 9/21/1987. AS AN EXCEPTION TO THE DRAWING, THE MATERIAL FOR THE MECHANIC'S TOOL POUCH MATERIAL CAN BE NYLON. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

General Services Administration

CARTRIDGE, TONER: ITEM NAME CARTRIDGE, TONER I.A.W. HEWLETT PACKARD P/N CF362X (HP 508X) CARTRIDGE TYPE NEW (OEM GENUINE) SPECIAL FEATURE HIGH YIELD CARTRIDGE FOR USE WITH HP LASERJET PRINTER SERIES M553 (FLOW), MFP M577 AND ANY OTHER PRINTER USING H

General Services Administration

BAG, TOOL: OVERALL LENGTH: 19-1/2 INCHES OVERALL HEIGHT: 8-1/2 INCHES OVERALL WIDTH: 6 INCHES MATERIAL: NYLON DUCK FEATURES: 2 POCKETS, SLIDE FASTENER CLOSURE, 2 NYLON WEBBING HANDLES NIB/NISH P/N 5140-00-473-6256 (PARTIAL DESCRIPTION)

General Services Administration

BAR,PRY SNAP-ON INC P/N: 2050

General Services Administration

PORTFOLIO

General Services Administration

WRENCH SET,OPEN END

General Services Administration

PLASTIC SHEET,LAMIN

General Services Administration

HANDLE SOCKET WRENCH, SEE ITEM PURCHASE DESCRIPTION IN BPACHINA APPROVED

General Services Administration

PLIERS, SLIP JOINT: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.23 AS CONTAINED IN ASME B107.500-2010; THIS DOCUMENT INCORPORATES AND INCLUDES THE REVISIONS OF PRIMARY STANDARD B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.2

General Services Administration

SCISSORS, LADIES (SEWING): MSP - 4,375. PRODUCT MADE IN CHINA. PLEASE SEE IPD OR LONG DESCRIPTION FOR FURTHER INFORMATION.

General Services Administration

WRENCH SET, SOCKET: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

DISPENSER, PRESSURE SENSITIVE ADHESIVE TAPE: ITEM NAME DISPENSER, PRESSURE SENSITIVE ADHESIVE TAPE OVERALL WIDTH 0.750 INCH OVERALL LENGTH 36.00 YARDS OVERALL CORE DIAMETER 1.000 INCH OVERALL COLOR TRANSPARENT FINISH TYPE GLOSSY DISPENSER TYPE HAND-H