Federal Contract Awards

General Services Administration

AX, SINGLE BIT: TYPE II: AXES OVERALL LENGTH: 35 INCHES HEAD WEIGHT: 3-1/4 POUNDS HEAD LENGTH: 7 INCHES MATERIAL, HEAD: STEEL MATERIAL, HANDLE: GLASS FIBER FEATURES: HUDSON BAY STYLE; OPTIONAL STRIKING FACE WITH CHAMFERED EDGES IS ACCEPTABLE. OR EQUA

Department of Homeland Security

HVAC REPLACEMENT FOR BUILDING 104 AND 109

Department of State

8A SOLE SOURCE - IT AND DATA SUPPORT - BP

General Services Administration

BOOTS,070R,330COYST,FLIGHT,COYOTE,PR

General Services Administration

GLASS CLEANER: READY-TO-USE LIQUID GLASS CLEANER FOR CLEANING AND POLISHING OF GLASS SURFACES, PLASTICS, CERAMICS, CHROME, PAINTED SURFACES ANDSTAINLESS STEEL. COMPLIES WITH COMMERCIAL ITEM DESCRIPTION (CID) A-A-60010, ENTITLED CLEANER, READY-TO-USE,

General Services Administration

SCREWDRIVER, CROSS TIP: STANDARD INCORPORATES THE FOLLOWING STANDARDS INTO ONE. B107.600 STANDARD USE KEY FIELD CODE: B107.15 FLAT TIP SCREWDRIVERS 1B107.15 B107.26 SCREWDRIVER BITS, HAND DRIVEN 1B107.26 B107.30 CROSS TIP SCREWDRIVERS 1B107.30 B107.3

General Services Administration

HAMMER, HAND - SEE DESCRIPTION IN THE CONTRACT

General Services Administration

PLASTIC SHEET: IAW - ADHESIVE BACKING, PET ORPETG IAW TABLE 1., POLISHED, 12 IN (+ 1/16 IN)0.0016 TO 0.0024 IN., 10 IN (+ 1/16 IN), MAXAGE OF DELIVERY-5 MOS.,UNIT OF ISSUE-ONE BOXOF 50 SHEETS.

General Services Administration

SCREWDRIVER, FLAT TIP: TYPE I: SCREWDRIVER ASSEMBLY CLASS 1: FLAT TIP STYLE B: GENERAL PURPOSE, FLARED SIDES BLADE LENGTH: 6 INCHES TIP THICKNESS: .037 INCH TIP WIDTH: 1/4 INCH BLADE MATERIAL: STEEL HANDLE MATERIAL: PLASTIC BLADE COATING: CHROME FEAT

General Services Administration

MULTI-TOOL, FOLDING, POCKET: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

CLIP, PAPER: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

TOWEL,PAPER

General Services Administration

PEN,BALL-POINT

General Services Administration

FOLDER,FILE

General Services Administration

COMBINATION TOOL, HAND: COMPONENTS: 10 MATERIAL: STEEL COLOR: #34086 PER FEDERAL STANDARD 595C OVERALL WEIGHT: 12 POUNDS (+/- 1 POUND) OR EQUAL SHALL BE DIMENSIONALLY EQUIVALENT ENSURING COMPATIBILITY, INTERCHANGEABILITY, AND FITMENT WITH ESTABLISHED

General Services Administration

BAG, TEXTILE: ITEM NAME BAG, TEXTILE I.A.W. MIL-PRF-5038 TYPE: III - TAPE - PLAIN WEAVE OVERALL WIDTH 11.00 INCHES OVERALL HEIGHT 13.00 INCHES OVERALL DEPTH 4.000 INCHES (FRONT TO BACK) OVERALL COLOR OLIVE DRAB OVERALL MATERIAL 1000 DENIER NYLON CORD

General Services Administration

PEN,MULTIFUNCTION

Department of Homeland Security

US COAST GUARD STATION APRA HARBOR HVAC UPGRADES

General Services Administration

SOCKET,SOCKET WRENCH MAC TOOLS INC P/N: VD146R

General Services Administration

PADS, SCOURING: LIGHT DUTY NON-WOVEN PAD COMP- OSED OF ABRASIVE COATED SYNTHETIC FIBERS. SZ. W-6 (+/- 1/8"), L-9-1/2 (+/- 1/8"), T-1/4 (MIN "). U/I PG (10 EA PER PG)

General Services Administration

PLIERS, SLIP JOINT: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.23 AS CONTAINED IN ASME B107.500-2010; THIS DOCUMENT INCORPORATES AND INCLUDES THE REVISIONS OF PRIMARY STANDARD B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.2

General Services Administration

SOCKET,SOCKET WRENCH MAC TOOLS INC P/N: VD146R

General Services Administration

SOCKET SET, SOCKET WRENCH: IAW THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.5M-2002. TYPE I: SOCKETS, SINGLE (6-POINT) CLASS 1: REGULAR LENGTH DRIVE SZ: 1/2 INCH FEMALE SQ. DRIVE WRENCH OPENINGS: THE SET SHALL CONSIST OF ONE (1) EACH OF T

General Services Administration

BAG, PLASTIC: ITEM NAME BAG, PLASTIC, (INTERLOCKING SEAL CLOSURE) OVERALL WIDTH 6.000 INCHES (+ 0.25 INCH) OVERALL LENGTH 6.000 INCHES (+ 0.25 INCH) OVERALL THICKNESS 0.002 INCH BREAKING FACTOR 4.3 LBS IN MACHINE DIRECTION, 3.0 LBS IN TRANSVERSE DIRE

General Services Administration

SEAL, ANTIPILFERAGE, CAR/BALL END SEAL,TYPE 9, NOT LESS THAN 6-INCHES, LENGTH, NOT LESS THAN .3 INCHES WIDTH, SHALL BE MARKED WITH "US" AND CONSECUTIVE SERIAL NUMBERS; SERIAL NUMBERS SHALL BE SELECTED BY THE SUPPLIER, BUT SHALL NOT BE DUPLICATED; AGE

General Services Administration

BAG, TOOL: OVERALL LENGTH: 19-1/2 INCHES OVERALL HEIGHT: 8-1/2 INCHES OVERALL WIDTH: 6 INCHES MATERIAL: NYLON DUCK FEATURES: 2 POCKETS, SLIDE FASTENER CLOSURE, 2 NYLON WEBBING HANDLES NIB/NISH P/N 5140-00-473-6256 (PARTIAL DESCRIPTION)

General Services Administration

BLOCK 1 ENGINEERING CHANGE PROPOSAL

General Services Administration

BAG, TOOL: OVERALL LENGTH: 19-1/2 INCHES OVERALL HEIGHT: 8-1/2 INCHES OVERALL WIDTH: 6 INCHES MATERIAL: NYLON DUCK FEATURES: 2 POCKETS, SLIDE FASTENER CLOSURE, 2 NYLON WEBBING HANDLES NIB/NISH P/N 5140-00-473-6256 (PARTIAL DESCRIPTION)

General Services Administration

STEP STAND,375 LB. LD CAP.,ALUMINUM

General Services Administration

CARTRIDGE, TONER I.A.W. HEWLETT PACKARD P/N: CF360A

General Services Administration

FOLDER, FILE: ITEM NAME FOLDER, FILE COLOR RED MATERIAL 17 POINT PAPER STOCK SZ LETTER FOLDER TYPE TRI-FOLD DUTY TYPE HEAVY CLOSURE TYPE ONE 0.500 INCH FASTENER, WITH A 2.500 INCH PRONG FASTENER ON CENTER SECTION (PARTIAL DESCRIPTION)

General Services Administration

FOLDER, FILE: - SEE ATTACHED DOCUMENT FOR DETAIL.

Department of Transportation

THE PURPOSE OF THIS MODIFICATION IS TO INCREASE THE HOURS AND ADD FUNDING BY 880 HOURS AT $99.50/HOURS TO EQUAL $87,560 THROUGH DECEMBER FOR STACEY BELLO FOR TASK ORDER 693JK424D600004/693JK425F96003N.

General Services Administration

BULLETIN BOARD BOARD: FRAME MATERIAL:OAK WOOD MOUNTING TYPE:WALL DESIGNTYPE: OPEN SZ: 3 X 4 FEET POSTING SURFACE MATERIAL: CORK. HANGING HARDWARE INCLUDED. ` (PARTIALDESCRIPTION)

General Services Administration

SEE IPD FOR PRODUCT DESCRIPTION

General Services Administration

PRODUCT MADE IN USA. SEE IPD OR LONG DESCRIPTION FOR FURTHER DETAILS.

General Services Administration

DIE SET,METAL STAMP

General Services Administration

CARD,INDEX ALL WEAT - SEE ATTACHED DOCUMENT FORDETAIL.

General Services Administration

BAR,PRY SNAP-ON INC P/N: 2050

General Services Administration

SCREWDRIVER,FLAT TIP ARMSTRONG BROS TOOL CO P/N: 66-265

General Services Administration

BLADE, HAND HACKSAW: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B94.52M-1999. BLADE LENGTH: 12 INCHES TOOTH QUANTITY: 18 PER INCH MATERIAL ACCOMMODATED: METALMATERIAL: STEEL FEATURES: FLEXIBLE BACK (PARTIAL DESCRIPTION)

Department of State

FIELD EQUIPMENT TO SUPPORT THE ROYAL BAHAMAS POLICE FORCE.

General Services Administration

BAG, TOOL: OVERALL LENGTH: 19-1/2 INCHES OVERALL HEIGHT: 8-1/2 INCHES OVERALL WIDTH: 6 INCHES MATERIAL: NYLON DUCK FEATURES: 2 POCKETS, SLIDE FASTENER CLOSURE, 2 NYLON WEBBING HANDLES NIB/NISH P/N 5140-00-473-6256 (PARTIAL DESCRIPTION)

General Services Administration

EXTENSION, SOCKET WRENCH: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.2 - 2002. TYPE IV: BARS, EXTENSION SQUARE DRIVE SZ: 3/4 INCH OVERALL LENGTH: 13 INCHES MATERIAL: STEEL COATING: BLACK OXIDE FEATURES: RIGID (EXCEPTIONS APPLY) (PARTIAL

General Services Administration

DUST REMOVER,COMPREGAS: REMOVE DUST, DIRT&OTHER MATTER ON KEYBOARDS, PRINTERS & OTHERSURFACES. OZANE SAFE. TRIGGEROPERATED NOZZLE. NON-FLAMMAVLE AND VOC COMPLIANT. SKILLCRAFT P/N 894002. SIX (6) TEN (10)OUNCESCANS IN A BOX.

General Services Administration

PRODUCT MADE IN THE USA.KEY, SOCKET HEAD SCREW.SEE LONG DESCRIPTION ANDIPD FOR FURTHER DETAILS

General Services Administration

BAG, PLASTIC: - SEE ATTACHED DOCUMENT FOR DETAIL.

General Services Administration

SATS APPROVED P/N: J7327M

General Services Administration

PENCIL,CARPENTER,PK12

General Services Administration

45D DBL FLARE SWAGE AND CUTTING KIT