Federal Contract Awards

Department of State

SATELLITE COMMUNICATIONS.

Department of the Interior

140P4525P0025: TROUBLESHOOT & REPAIR HVAC-BUILDING 65, SANDY HOOK UNIT, GATEWAY NATIONAL RECREATION AREA, FORT HANCOCK, NJ

General Services Administration

EXTENSION, SOCKET WRENCH: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.2 - 2002. TYPE IV: BARS, EXTENSION SQUARE DRIVE SZ: 3/4 INCH OVERALL LENGTH: 13 INCHES MATERIAL: STEEL COATING: BLACK OXIDE FEATURES: RIGID (EXCEPTIONS APPLY) (PARTIAL

General Services Administration

HOODED COVERALL W/BOOTS,WHITE,2XL,PK25

General Services Administration

DEFPURPOSEMAGCONTACTOR,24VAC,3P,75A

General Services Administration

BAR,PRY SNAP-ON INC P/N: 2050

General Services Administration

FRAME,PICTUREFRAME, MAHOGANY STAIN FINISH WITH GOLD BEADING,10X14, BEVEL MAT, BX OF66666666666666

General Services Administration

WRENCH, TORQUE: IAW SOCIETY OF AUTOMOTIVE ENGINEERS, AEROSPACE HAND TORQUE WRENCHES (MECHANICAL, IMPULSE) AS28431 REVISION A, DATED FEBRUARY 21, 2011. TYPE I: BI-DIRECTIONAL TORQUE WRENCH CLASS 1 NON-RATCHET HEAD (PRECISE CLOCKWISE TORQUE) OVERALL LE

General Services Administration

SOAP,TOILET

General Services Administration

TUSA TRIFORCE HYFLEX FIN, BK, L

General Services Administration

STEEL SINGLE PED DESK 30X78

General Services Administration

LAUNDRY DETERGENT,LIQUID,112 CT,PK4

General Services Administration

PLATE, EATING (DINNER): NAVY, FLAG OFFICERS MESS. PLASTIC PACKAGING/PACKING MATERIALS PROHIBITED.

General Services Administration

TISSUE,FACE,27

General Services Administration

TAPE,INSULATION,ELE PG/6EA

General Services Administration

PAPER CLIP,GOLD,2IN L,PK50

General Services Administration

CLEANER,INDUSTRIAL,

General Services Administration

PLIERS, SLIP JOINT: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.23 AS CONTAINED IN ASME B107.500-2010; THIS DOCUMENT INCORPORATES AND INCLUDES THE REVISIONS OF PRIMARY STANDARD B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.2

General Services Administration

HAMMER, HAND - SEE DESCRIPTION IN THE CONTRACT

General Services Administration

PMA COCOA BRN, M/L, HELMET, EXFIL LTP

General Services Administration

COLLARED COVERALLS,M,WHITE,SMMMS,PK24

General Services Administration

THREAD MILL

General Services Administration

SEAL, SILICONE, DARK BROWN, 204 FT L

General Services Administration

TYPE L,HARD LENGTH,2 IN.10FT.

General Services Administration

DEMO OF EXISTING TRENCH DRAIN BY ENTRANCE SALLYPORT, AND INSTALLATION OF NEW CAST IRON DRAINS AT THE MCCORMACK FEDERAL BUILDING IN BOSTON, MA.

General Services Administration

PLIERS, SLIP JOINT: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.23 AS CONTAINED IN ASME B107.500-2010; THIS DOCUMENT INCORPORATES AND INCLUDES THE REVISIONS OF PRIMARY STANDARD B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.2

Department of Transportation

GEM STATE FY25 REGULATORY FEES A PGM-GEM25-1003 A3

General Services Administration

GAS SUPPLY FOR FRANCONIA A, 6808 LOISDALE RD A, SPRINGFIELD, VA0247AN. WA

General Services Administration

BAG, TOOL: OVERALL LENGTH: 19-1/2 INCHES OVERALL HEIGHT: 8-1/2 INCHES OVERALL WIDTH: 6 INCHES MATERIAL: NYLON DUCK FEATURES: 2 POCKETS, SLIDE FASTENER CLOSURE, 2 NYLON WEBBING HANDLES NIB/NISH P/N 5140-00-473-6256 (PARTIAL DESCRIPTION)

Department of Veterans Affairs

STAIRGLIDE

General Services Administration

CLOTH,CLEANING,LOW-LINT CID A-A-59323A DATED 3/24/05. TYPE II FOR GENERAL USE, REQUIRE LOW-LINT, HIGHLY ABSOREBENT WIPER. FIRST ARTICLE REQUIRED IN ACCORDANCE WITH PARAGRAPH 3.6. U/I BX (2 EACH, FIVE LB BAGS OF CLOTHS PER BOX.

General Services Administration

HANDHELD FLASHLIGHT,600/260/35 LM,5.46"L

General Services Administration

TAPE,1 IN X 60 YD,6.4MIL,WHITE

General Services Administration

MULTI-TOOL, FOLDING, POCKET: - SEE ATTACHED DOCUMENT FOR DETAIL.

Department of Homeland Security

MODIFICATION TO EXERCISE OPTION 10/01/25-10/30/25.

General Services Administration

THIS REQUIREMENT IS FOR THE REPLACEMENT OF THE EMERGENCY FIRE DOOR AT THE WILLIAM STEGER FEDERAL BUILDING LOCATED IN TYLER, TEXAS

Department of Justice

TITLE: FEDEX - SMALL PACKAGES REQUESTOR: KARLA Z COLON-DELGADO REF AWARD/BPA: 15JPSS25D00000293 POP DATES: 10/01/2025 TO 09/30/2026 FUND TO DATE: 12/31/2025

Department of Justice

RED AND BLUE TEAM CYBERSECURITY PROGRAM (REBL)

Department of Homeland Security

TECHNICAL OPERATIONS SUPPORT SERVICES (TOSS) TO EXERCISE FAR 52.217-8 AND EXTEND SERVICES FROM 10/23/2025-12/22/2025.

Department of Homeland Security

THE PURPOSE OF THIS DELIVERY ORDER MODIFICATION IS TO ADD ADDITIONAL BATTERY-POWERED CUTTERS AND BATTERIES, WHICH SERVE AS TACTICAL EQUIPMENT UTILIZED DURING HOMELAND SECURITY INVESTIGATIONS OPERATIONS.

Department of Homeland Security

COPIER LEASE R7

Department of Justice

MISSION - FY2026 DISTRICT GUARD SUPPORT SERVICES - OKC - MISSION CRITICAL: TRANSPORTING AND PRODUCING PRISONERS FOR COURT PROCEEDINGS.

Department of Homeland Security

CLOSEOUT

Department of Veterans Affairs

DRT STAFFING SERVICES

Department of Justice

NCETR RANGE VEHICLE PREVENTATIVE MAINTENANCE AND REPAIRS

Department of Homeland Security

LINEAR DETECTION GROUND SYSTEM (LGDS) CONTRACTOR MAINTENANCE LOGISTICS SUPPORT (CMLS)

Department of Homeland Security

THE PURPOSE OF IS MODIFICATION IS TO INCORPORATE A CITY PLANNER RESOURCE LABOR CATEGORY TO PROVIDE FEDERAL, STATE, LOCAL, TRIBAL, AND TERRITORIAL RESPONSE AND EXERCISE PLANNERS WITH A COMPREHENSIVE SET OF TOOLS FOR CHEMICAL, BIOLOGICAL, RADIOLOGICAL,

General Services Administration

SCISSORS, ELECTRICIANS': OVERALL LENGTH: 5 INCHES; TOLERANCE: 1/2 INCH CUT LENGTH: 1-3/4 INCHES, MINIMUM MATERIAL: STEEL COATING: NICKEL-PLATED FEATURES: BOTH BLADES POINTED; SERRATED SCRAPING EDGES ON BACKS OF BLADES (EXCEPTIONS APPLY) (PARTIAL DESC

General Services Administration

TOWEL,MACHINERY WIP

General Services Administration

SCREWDRIVER, FLAT TIP: TYPE I: SCREWDRIVER ASSEMBLY CLASS I: FLAT TIP STYLE B: GENERAL PURPOSE; FLARED SIDES TIP THICKNESS: .055 INCH TIP WIDTH: 3/8 INCH BLADE LENGTH: 7 29/32 INCHES OVERALL LENGTH: 13 13/32 INCHES MATERIAL BLADE: STEEL MATERIAL HAND