LYEV, LLC

DRILL, PNEUMATIC, PORTABLE: DRIVE FOR WHICH DESIGNED: STRAIGHT CHUCK SZ: 3/8 INCH KEYED HANDLE TYPE: PISTOL GRIP LENGTH: 7 INCHES (-0/+2 INCHES) MAX WEIGHT: 4 LBS THROTTLE TYPE: TRIGGER MAX NO LOAD SPEED: 4200 RPM (+/- 200 RPM) AIR INLET: 1/4 INCH (3

RATCHET HEAD,SOCKET

CUTTER, RIVET: - SEE ATTACHED DOCUMENT FOR DETAIL.

JACK, HYDRAULIC, HAND: IAW US ARMY TANK AUTOMOTIVE AND ARMAMENTS COMMAND DRAWING NUMBER 12542740, DATED 1/10/2012 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

JACK, HYDRAULIC, HAND: IAW US ARMY TANK AUTOMOTIVE AND ARMAMENTS COMMAND DRAWING NUMBER 12542740, DATED 1/10/2012 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

PAN, DRIP: CAPACITY 3.0GALLONS; HEIGHT 5.0 INCHES; DIAMETER 17.5 INCHES; THICKNESS 0.295 INCH;MATERIAL: POLYETHYLENE RESIN, OIL-RESISTANT, DOUBLE-FIBER WOVEN REINFORCED, MOLYBDENUM DISULFIDE COATING; CHOCK: INCLUDED, WITH EYEBOLT AND ATTACHMENT CHAIN

CALIPER, DIGITAL DISPLAY: RANGE: 0 TO 6 INCHES GRADUATION: .0005 INCH MATERIAL: STEEL JAW DEPTH, OUTSIDE: 1-1/2 INCHES JAW DEPTH, INSIDE: 5/8 INCH (TOLERANCE: 1/16 INCH) DISPLAY: LCD, ENGLISH/METRIC FEATURES: SPC OUTPUT; FITTED PLASTIC CARRYING CASE;

SOCKET SET, SOCKET WRENCH: IAW THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.5M-2002. TYPE I: SOCKETS (6-POINT) CLASS 1: REGULAR LENGTH SQUARE DRIVE SZ: 1/2 INCH WRENCHING OPENING: SET CONSISTS OF ONE (1) EACH OF THE FOLLOWING 18 METRIC SZ

BRUSH, WIRE, ROTARY, WHEEL: IAW CID A-A-2516A, DATED MAY 16, 2002. TYPE: I NARROW FACE WIDTH CLASS: 3 HIGH-CARBON TEMPERED STEEL BRUSH OUTSIDE DIAMETER: 6 INCHES WIRE DIAMETER: 0.014 INCHES ARBOR HOLE: 5/8 INCH WIRE TRIM LENGTH: 1-5/16 INCHES MIN. TO

CUTTER, RIVET: - SEE ATTACHED DOCUMENT FOR DETAIL.

JACK, HYDRAULIC, HAND: IAW US ARMY TANK AUTOMOTIVE AND ARMAMENTS COMMAND DRAWING NUMBER 12542740, DATED 1/10/2012 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

CUTTER, RIVET: - SEE ATTACHED DOCUMENT FOR DETAIL.

PULLER KIT, UNIVERSAL: - SEE ATTACHED DOCUMENT FOR DETAIL.

PLIERS, WIRE TWISTER: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.18 AS CONTAINED IN ASME B107.500-2010; THIS DOCUMENT INCORPORATES AND INCLUDES THE REVISIONS OF PRIMARY STANDARD B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107

WRENCH, TORQUE: TYPE I: INDICATING CLASS C: RIGID HOUSING STYLE 1: PLAIN SCALE TORQUE CAPACITY: 0 FOOT-POUNDS TO 250 FOOT-POUNDS TORQUE SCALE GRADUATIONS: 10 FOOT-POUNDS TORQUE SIGNAL: DIAL INDICATOR SQUARE DRIVE SZ: 1/2 INCH EXTERNAL OVERALL LENGTH:

GRINDER,PORTABLEBLE: TYPE: BENCH GRINDER VOLTAGE: 120 VAC MIN. 240 VAC MAX RATING: 0.5 HP ARBORHOLE: 5/8 INCHES WHEEL DIAMETER: 7 INCHES WHEELTHICKNESS: 1 INCH SPEED: 3450 RPM MAX. GRINDINGWHEEL: 36 AND 60 GRIT (1 EACH) POWER CORD: 6 FT, 3CONDUCTOR F

RATCHET HEAD,SOCKET

WRENCH, IMPACT, ELECTRIC: OVERALL LENGTH: 12.5 INCHES MAX DRIVE TYPE: STRAIGHT SPINDLE TYPE: MALE/SQUARE DRIVE SZ: 0.5 INCH VOLTAGE: 120 VAC CURRENT: 7 AMP (+/- 1 AMP) TORQUE: 300 FT LBS (+/- 20 FT LBS) SPEED: 1800 RPM (+/- 100 RPM) IMPACT RATE: 2600

BRUSH,WIRE,ROTARY W

CALIPER, DIAL: MINIMUM DIAL GRADUATION UNIT: 0.001 INCH INSIDE JAW DEPTH: 5/8 INCH OUTSIDE JAW DEPTH: 1.5 INCH MEASUREMENT RANGE: 0 INCH, MINIMUM; 6 INCH, MAX FINE ADJUSTMENT FEATURE: INCLUDED NIB CLOSED POSITION WIDTH: 0.3 INCH ACCURACY: 0.001 INCH

CUTTER, WIRE ROPE, HAND OPERATED: IAW CID A-A-3029, REVISION A, DATED JULY 1, 2004. SZ: NUMBER 2 FEATURES: HYDRAULIC TYPE; 1-1/8 INCH MAX WIRE ROPE CAPACITY (PARTIAL DESCRIPTION)

SCREWDRIVER ATTACHMET, SOCKET WRENCH: SOCKET WITH BIT (HEX SET 51 ITEMS) SQUARE DRIVE SZ: 1/4 INCH TIP SZS: MAGNETIC EXTENSION: 4-9/16 INCHES BIT END CAP 14-BIT HOLDER(3) SOCKET ADAPTER: 1/4INCH HEX BIT SZS: .50, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/

CUTTER, PIPE: CONSIST OF ONE (1) CUTTER WHEEL AND TWO (2) ROLLERS CUTTER TYPE: WHEEL OPERATION METHOD: HAND FEED TYPE: SLIDING HAND SCREW PIPE SZ ACCOMMODATED: 2 TO 4 INCHES PIPING MATERIAL ACCOMMODATED: STEEL OR WROUGHT IRON MATERIAL: STEEL (PARTIAL

FID: IAW CID (CID) A-A-52129, DATED JUNE 30, 1993. TYPE II: STANDING SZ 3: 36 INCHES BY 6 INCHES (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

CROWFOOT ATTACHMENT

WRENCH, TORQUE: TYPE I: INDICATING CLASS C: RIGID HOUSING STYLE 1: PLAIN SCALE TORQUE CAPACITY: 0 FOOT-POUNDS TO 250 FOOT-POUNDS TORQUE SCALE GRADUATIONS: 10 FOOT-POUNDS TORQUE SIGNAL: DIAL INDICATOR SQUARE DRIVE SZ: 1/2 INCH EXTERNAL OVERALL LENGTH:

JACK, HYDRAULIC, HAND: IAW US ARMY TANK AUTOMOTIVE AND ARMAMENTS COMMAND DRAWING NUMBER 12542740, DATED 1/10/2012 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, IMPACT, ELECTRIC: TOOL ONLY DRIVE TYPE: STRAIGHT SQUARE DRIVE SZ: 0.5 INCH OVERALL LENGTH: 9 INCHES MAX HANDLE TYPE: PISTOL GRIP THROTTLE TYPE: TRIGGER CURRENT: DC VOLTAGE: 20VDC SPEED: 3 MAX SPEED RATE: 0-400/0-1200/0-1900 (+ 10%) MAX IMPACT

SOCKET SET, SOCKET WRENCH: IAW THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.5M-2002. TYPE I: SOCKETS (6-POINT) CLASS 1: REGULAR LENGTH SQUARE DRIVE SZ: 1/2 INCH WRENCHING OPENING: SET CONSISTS OF ONE (1) EACH OF THE FOLLOWING 18 METRIC SZ

WRENCH, IMPACT, ELECTRIC: TOOL ONLY DRIVE TYPE: STRAIGHT SQUARE DRIVE SZ: 0.5 INCH OVERALL LENGTH: 9 INCHES MAX HANDLE TYPE: PISTOL GRIP THROTTLE TYPE: TRIGGER CURRENT: DC VOLTAGE: 20VDC SPEED: 3 MAX SPEED RATE: 0-400/0-1200/0-1900 (+ 10%) MAX IMPACT

DIE AND TAP SET,THR

PLASTIC STRAPPING; .5 INCH WIDE.

WRENCH,BOX: IAW STANLEY-PROTO PN HDO65M. MARK EACH ITEM IN A PERMANENT AND LEGIBLE MANNER WITHMFG'S PN AND NAME OR IDENTIFYING SYMBOL. PKG IAWSTD COMM PRAC. PK IAW STD COMM PRAC. MARKING IAWCURRENT VERSION OF FED. STD. 123.

WRENCH, TORQUE: TYPE I: INDICATING CLASS C: RIGID HOUSING STYLE 1: PLAIN SCALE TORQUE CAPACITY: 0 FOOT-POUNDS TO 250 FOOT-POUNDS TORQUE SCALE GRADUATIONS: 10 FOOT-POUNDS TORQUE SIGNAL: DIAL INDICATOR SQUARE DRIVE SZ: 1/2 INCH EXTERNAL OVERALL LENGTH:

CALIPER, MICROMETER, OUTSIDE: OUTSIDE MICROMETER CALIPER, ENAMELED (FINISHED) FRAME WITH A SOLID ANVIL MAX MEASUREMENT: 5 INCHES MEASUREMENT RANGE: 0 INCH, MINIMUM; 1 INCH, MAX UNITS OF GRADUATION: .0001 INCH PERMISSIBLE FLEXURE: .0015 INCH, MAX FLAT

RATCHET HEAD,SOCKET

WRENCH, OPEN END: HEAD ANGLE: 15 DEGREES BOTH ENDS OVERALL LENGTH: 7 INCHES WRENCH OPENINGS: 13/16 INCH SMALL END BY 7/8 INCH LARGE END WRENCH THICKNESS: 1/8 INCH BOTH ENDS OFFSET HEIGHT: 3/16 INCH MATERIAL: STEEL COATING: CHROME AND OXIDE FEATURES:

PULLER KIT, UNIVERSAL: FUNCTIONAL DESCRIPTION: USED TO REMOVE THE CRANKSHAFT OIL SEAL AND DUST BOOT ON DETROIT DIESEL SERIES 53, V53, 71, V-71, 92, 110, 149, AND 8.2L ENGINES. COMPONENT QUANTITY: 4 FEATURES: SLIDE HAMMER BOSCH AUTOMOTIVE SERVICE SOLU

TOOL BOX, PORTABLE: IAW GSA PURCHASE DESCRIPTION 5140-00-315-2747. EXCEPTION TO TECHNICAL DOCUMENT: COLOR. BOX BODIES, LIDS, TRAYS, AND DRAWERS, EXCLUDING HARDWARE, SHALL HAVE A DURABLE RED BAKED FINISH IAW GOOD COMMERCIAL PRACTICE. HARDWARE SHALL BE

HAMMER, HAND: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.53 AS CONTAINED IN ASME B107.400-2008; THIS DOCUMENT INCORPORATES AND INCLUDES THE REVISIONS OF PRIMARY STANDARD B107.41, B107.42, B107.53, B107.54, B107.56, AND B107.58 OVERALL L

PULLER, MECHANICAL: IAW GSA PURCHASE DESCRIPTION 5120-00-293-2925, DATED 5/9/1999 SZ: 5 SPREAD RANGE: 12 INCHES FEATURES: GEAR AND BEARING; TWO JAW; EXTERNAL SINGLE END GRIP EXCEPTIONS TO PD: LONG REACH: 10-5/8 INCHES SHORT REACH: 7-1/4 INCHES IN LIE

WRENCH, BOX: STANLEY-PROTO INDUSTRIAL WORKS, PN 2632SW. PKG IAW STD COMM PRAC. THE UNIT PACKAGESSHALL BE PACKED IN A CLOSE FITTING FIBERBOARD BOX IN COMPLIANCE WITH THE UNIFORM FREIGHT CLASSIFICATION AND THE NATIONAL MOTOR FREIGHT CLASSIFICATION REQU

CALIPER, DIAL: MINIMUM DIAL GRADUATION UNIT: 0.001 INCH INSIDE JAW DEPTH: 5/8 INCH OUTSIDE JAW DEPTH: 1.5 INCH MEASUREMENT RANGE: 0 INCH, MINIMUM; 6 INCH, MAX FINE ADJUSTMENT FEATURE: INCLUDED NIB CLOSED POSITION WIDTH: 0.3 INCH ACCURACY: 0.001 INCH

VISE, WIRE ROPE SPLICING: FRONT JAW SPREAD: 11 INCHES JAW OPENING: 9-1/2 INCHES JAW WIDTH: 1-3/4 TO 2 INCHES BASE DIMENSIONS: 19 X 20 INCHES WIRE CAPACITY: 3/8 TO 1-1/2 INCHES WEIGHT: 83 POUNDS MATERIAL, BASE: IRON MATERIAL, JAWS: STEEL FUNCTIONAL DE

WRENCH, TORQUE: TYPE I: INDICATING CLASS C: RIGID HOUSING STYLE 1: PLAIN SCALE TORQUE CAPACITY: 0 TO 250 FOOT-POUNDS AND 0 TO 338.95 NEWTON-METERS TORQUE SCALE GRADUATIONS: 10 FOOT-POUNDS AND 13.56 NEWTON-METERS TORQUE SIGNAL: DIAL SQUARE DRIVE SZ: 3

EXTENSION SET,SOCKEENCH: SHALL BE IAW SAE AEROSPACE STANDARD: AS4283B -HANDLES AND ATTACHMENTSFOR HAND SOCKET WRENCHES,DATED DECEMBER 2011 TYPEII: ATTACHMENTSCLASS2:BAR, EXTENSION, SOLID SQUARE DRIVE SZ:1/2 INCH OVERALL LENGTHS: THE SETSHALL CONSISTO

GAGE SET, PISTON: PISTON TO LINER FEELER GAGE SET. SET CONSISTS OF TWO (2) COMPONENTS: PISTON FEELER GAGE AND SPRING TENSION SCALE. KENT-MOORE PN J05438-A. (PARTIAL DESCRIPTION)

EXTENSION SET,SOCKEENCH: SHALL BE IAW SAE AEROSPACE STANDARD: AS4283B -HANDLES AND ATTACHMENTSFOR HAND SOCKET WRENCHES,DATED DECEMBER 2011 TYPEII: ATTACHMENTSCLASS2:BAR, EXTENSION, SOLID SQUARE DRIVE SZ:1/2 INCH OVERALL LENGTHS: THE SETSHALL CONSISTO

CUTTER, PIPE: CONSIST OF ONE (1) CUTTER WHEEL AND TWO (2) ROLLERS CUTTER TYPE: WHEEL OPERATION METHOD: HAND FEED TYPE: SLIDING HAND SCREW PIPE SZ ACCOMMODATED: 2 TO 4 INCHES PIPING MATERIAL ACCOMMODATED: STEEL OR WROUGHT IRON MATERIAL: STEEL (PARTIAL

WRENCH, OPEN END: IAW ASME B107.100-2020, FLAT WRENCHES. CAT 6 WRENCH,BOX FORMERLY 1B107.6-1 CAT 8 ADJUSTABLE WRENCHES FORMERLY 1B107.8 CAT 9 BOX WRENCHES, DOUBLE HEADFORMERLY 1B107.9 CAT 21WRENCH, CROWFOOT FORMERLY1B107.21 CAT 39 OPEN ENDWRENCHES, D