MAY TOOL INC

BRUSH,SCRUB,DECK: FIBER 100% PALMYRA OR 100% POLYPROPYLENE FILAMENT, HARDWOOD DENSE CLOSE GRAINED OR PLASTIC BRUSH BLOCK. BLOCK LENGTH, 9-3/4", WIDTH 2-1/2", THICKNESS 1-1/4", FIBER LENGTH 2". U/I EA

NACFAC PR 482180 PER CONTRACT LINE ITEM NUMBERS (CLIN) LISTED ON LAST PAGE OF RFQ.

DISK, ABRASIVE, ALUMINUM OXIDE AND CERAMIC, 120 GRIT, 6.00 INCH DIAMETER, C-WEIGHT PAPER BACKING, PLAIN FLAT, HOLES TO AID IN DUST REMOVAL, FUNCTIONALLY COMPATIBLE WITH HOOK & LOOP STYLE BACK-UP PADS

WATCH,WRIST

GRINDER,PORTABLE

WATCH,WRIST

WRENCH, PIPE: TYPE: MONKEY WRENCH STYLE: STRAIGHT SPUD DESIGN: I-BEAM OVERALL LENGTH: 12 INCHESJAW CAPACITY: 3/8 TO 2-5/8 INCHES JAW MATERIAL:FORGED STEEL HANDLE MATERIAL: CAST IRON HANDLE COATING: RUST PREVENTATIVE FEATURES: SMOOTH TOOTHLESS JAWS; F

BRUSH, WIRE, ROTARY CUP: IAW CID A-A-2511A DATED MAY 16, 2002 TYPE III:HIGH CARBON-TEMPERED STEEL OUTSIDE DIAMETER: 1 INCH WIRE DIAMETER: 0.0104 INCH WIRE TYPE: CRIMPED TRIM WIRE LENGTH: 1 INCH (+/- 1/4 INCH) EXCEPTION TO STANDARD: MAX RPM: 22000 (PA

SOCKET, SOCKET WRENCH: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.1-2002. TYPE I: SOCKETS, SINGLE (6-POINT) CLASS 1: REGULAR LENGTH SQUARE DRIVE SZ: 3/4 INCH WRENCH OPENING: 1-1/2 INCHES MATERIAL: STEEL COATING: CHROME (EXCEPTIONS APPLY

WATCH,WRIST

GRINDER,PORTABLE

BLADE, RECIPROCATING SAW: SHANK TYPE: UNIVERSALSHANK LENGTH: 0.5 INCH BACK TYPE: STRAIGHT OVERALL LENGTH: 6 INCHES (+/- 0.25 INCH) OVERALL HEIGHT: 0.75 TO 1 INCH MIN/MAX THICKNESS: 0.030 INCH TEETH QUANTITY: 18 TPIMATERIAL: HIGH SPEED STEEL FEATURES:

BAG, TOOLS AND SPARE PARTS: ITEM NAME BAG, TOOLS AND SPARE PARTS OVERALL LENGTH 20.00 INCHES OVERALL HEIGHT 18.00 INCHES OVERALL DEPTH 11.00 INCHES UNIT TYPE WELDING EQUIPMENT KIT BAG OVERALL COLOR BLACK MATERIAL AND LOCATION NYLON; SINGLE WALL STYLE

SOCKET, SOCKET WRENCH: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.1-2002. TYPE I:SOCKETS, SINGLE (6-POINT) CLASS 1: REGULAR LENGTH SQUARE DRIVE SZ: 1/2 INCH WRENCHING OPENING: 1-1/2 INCHES MATERIAL: STEEL COATING: CHROME (EXCEPTIONS APP

BLADE, RECIPROCATING SAW: SHANK TYPE: UNIVERSALSHANK LENGTH: 0.5 INCH BACK TYPE: STRAIGHT OVERALL LENGTH: 6 INCHES (+/- 0.25 INCH) OVERALL HEIGHT: 0.75 TO 1 INCH MIN/MAX THICKNESS: 0.030 INCH TEETH QUANTITY: 18 TPIMATERIAL: HIGH SPEED STEEL FEATURES:

WRENCH, IMPACT, ELECTRIC: TOOL ONLY DRIVE TYPE: STRAIGHT SQUARE DRIVE SZ: 0.5 INCH OVERALL LENGTH: 9 INCHES MAX HANDLE TYPE: PISTOL GRIP THROTTLE TYPE: TRIGGER CURRENT: DC VOLTAGE: 20VDC SPEED: 3 MAX SPEED RATE: 0-400/0-1200/0-1900 (+ 10%) MAX IMPACT

WRENCH SET,COMBINAT AS954H WRENCHES, HAND,TWELVE POINT, HIGH STRENGTH, THIN WALL TYPE II:WRENCHES, BOX CLASS 4: COMBINATION, BOX AND OPEN END WRENCH STYLE B: SHORT LENGTH COMPONENT QUANTITY: 10 WRENCH OPENINGS: SET CONSISTS OF ONE (1) EACHOF THE FOLL

WRENCH, PIPE: VSECK TOOL KIT OVERALL LENGTH: 24 INCHES WRENCHING PIPE CAPACITY: 3 INCHES WEIGHT: 6 POUNDS HANDLE MATERIAL: ALUMINUM JAW MATERIAL: HARDENED ALLOY STEEL FEATURES: STRAIGHT HANDLE, I-BEAM HANDLE, STANDARD JAW RIDGID PAPER TUBE CORP. PN 3

WRENCH,BOX: IAW STANLEY PROTO PN HDO70M. MARK EACH ITEM IN A PERMANENT AND LEGIBLE MANNER WITHMFG'S PN AND NAME OR IDENTIFYING SYMBOL. PKG IAWSTD COMM PRAC. PK IAW STD COMM PRAC. MARKING IAWCURRENT VERSION OF FED. STD. 123.

BAG, TOOLS AND SPARE PARTS: ITEM NAME BAGS, TOOLS AND SPARE PARTS OVERALL LENGTH 20.00 INCHES OVERALL HEIGHT 18.00 INCHES OVERALL DEPTH 11.00 INCHES UNIT TYPE EMERGENCY LIGHTING KIT BAG OVERALL COLOR YELLOW MATERIAL AND LOCATION NYLON; SINGLE WALL ST

WRENCH, PIPE: OVERALL LENGTH: 48 INCHES JAW CAPACITY: 6 INCHES WRENCH SHAPE: RECTANGULAR SINGLE END INTERNAL HANDLE MATERIAL: ALUMINUM FEATURES: STRAIGHT JAW RIDGE TOOL CO. PN 31115 OR EQUAL (PARTIAL DESCRIPTION)

CHISEL, POWER HAMMER: WIDTH OF CUT: 1.25 INCHES SHANK OVERALL LENGTH: 1.75 INCHES (+/- 0.125 INCH) SHANK DIAMETER: 0.495 INCH SHANK STYLE: ROUND OVERALL LENGTH: 9 INCHES (+/- 0.5 INCH) STYLE DESIGNATOR: SCALING MATERIAL: HIGH SPEED STEEL (PARTIAL DES

WRENCH BOX;IAW COMMERCIAL ITEM DESCRIPTION, A-A-1360,DTD 1/14/80;NSN5120-00-277-1569 PK & PKG STD COMM PRAC MK IAW LATEST CHG/REV FED STD 123 DOE 12/16/88

WRENCH, PIPE: VSECK TOOL KIT OVERALL LENGTH: 24 INCHES WRENCHING PIPE CAPACITY: 3 INCHES WEIGHT: 6 POUNDS HANDLE MATERIAL: ALUMINUM JAW MATERIAL: HARDENED ALLOY STEEL FEATURES: STRAIGHT HANDLE, I-BEAM HANDLE, STANDARD JAW RIDGID PAPER TUBE CORP. PN 3

DRILL, PNEUMATIC, PORTABLE: DRIVE FOR WHICH DESIGNED: STRAIGHT CHUCK SZ: 3/8 INCH KEYED HANDLE TYPE: PISTOL GRIP LENGTH: 7 INCHES (-0/+2 INCHES) MAX WEIGHT: 4 LBS THROTTLE TYPE: TRIGGER MAX NO LOAD SPEED: 4200 RPM (+/- 200 RPM) AIR INLET: 1/4 INCH (3

WRENCH, PIPE: OVERALL LENGTH: 48 INCHES JAW CAPACITY: 6 INCHES WRENCH SHAPE: RECTANGULAR SINGLE END INTERNAL HANDLE MATERIAL: ALUMINUM FEATURES: STRAIGHT JAW RIDGE TOOL CO. PN 31115 OR EQUAL (PARTIAL DESCRIPTION)

WRENCH SET,COMBINAT AS954H WRENCHES, HAND,TWELVE POINT, HIGH STRENGTH, THIN WALL TYPE II:WRENCHES, BOX CLASS 4: COMBINATION, BOX AND OPEN END WRENCH STYLE B: SHORT LENGTH COMPONENT QUANTITY: 10 WRENCH OPENINGS: SET CONSISTS OF ONE (1) EACHOF THE FOLL

JACK, HYDRAULIC, HAND: CAPACITY: 10 TONS COLLAPSED HEIGHT: 5-7/8 INCHESMAX EXTENDED HEIGHT: 7 INCHES MINIMUM PUMP TYPE: SINGLE FEATURES: REMOTE CONTROL (PARTIAL DESCRIPTION)

PRESS, LEAD SEAL, HAND: OVERALL LENGTH: 5 INCHES DIE QUANTITY: 2 FEATURES: REVERSIBLE UPPER DIE; REMOVABLE DIES; SQUARE COMPLETE INSPECTION APPROVAL SYMBOL ON ONE FACE; ROUND PARTIAL INSPECTION APPROVAL SYMBOL ON THE OTHER FACE; BLANK LOWER DIE UNITE

BAG, TOOLS AND SPARE PARTS: ITEM NAME BAG, TOOLS AND SPARE PARTS OVERALL LENGTH 20.00 INCHES OVERALL HEIGHT 18.00 INCHES OVERALL DEPTH 11.00 INCHES UNIT TYPE WELDING EQUIPMENT KIT BAG OVERALL COLOR BLACK MATERIAL AND LOCATION NYLON; SINGLE WALL STYLE

NIBBLER,PNEUMATIC,PABLE: OVERALL LENGTH: 7.75 INCHES (+/- 0.25 INCH) CUTTING SPEED: 65 INCHES PER MINUTE MIN. IN MILD STEEL SPEED: VARIABLE SPEED RATE: 0-2500 RPMCUTTING RADIUS: 0.625 INCH WEIGHT: 3.5 POUNDS MAX. OPERATING AIR CONSUMPTION:20 SCFM MAX

BAG, TOOLS AND SPARE PARTS: ITEM NAME BAG, TOOLS AND SPARE PARTS OVERALL LENGTH 17.00 INCHES OVERALL HEIGHT 11.00 INCHES OVERALL DEPTH 7.000 INCHES UNIT TYPE C CLAMPS (SHORING KIT) BAG OVERALL COLOR BROWN MATERIAL AND LOCATION NYLON; SINGLE WALL STYL

RAKE, GARDEN: IAW CID A-A-2846, RAKE, HAND (GARDEN AND LAWN), DATED AUGUST 1, 1994. TYPE: I (GARDEN RAKE) CLASS: A (BOW) GENERAL CHARACTERISTICS ITEM DESCRIPTION: BOW TYPE; ONE PIECE, FORGED OR WELDED HEAD AND BOW; 13-1/2 IN. MIN. HEAD WIDTH; 14 TO 1

HAMMER,PNEUMATIC,POBLE:IMPACT TYPE: RECIPROCATING OVERALL LENGTH:10.25INCHES (+/-0.5INCH) OVERALL HEIGHT: 1.625INCHESMAX (+/- 0.25 INCH) HANDLETYPE: BODY GRIPTHROTTLETYPE: LEVER OPERATING AIRPRESSURE: 90PSI AIR INLET: 0.25 INCH IMPACT RATE: 4000 BPM

HELMET, SAFETY, HAT, FULL BRIM, WITHOUT HEADLAMP CLIPS, TYPE I, CLASS E, COLOR WHITE, U/I BX (10 EACH PER BX)

HAMMER,PNEUMATIC,POBLE:IMPACT TYPE: RECIPROCATING OVERALL LENGTH:10.25INCHES (+/-0.5INCH) OVERALL HEIGHT: 1.625INCHESMAX (+/- 0.25 INCH) HANDLETYPE: BODY GRIPTHROTTLETYPE: LEVER OPERATING AIRPRESSURE: 90PSI AIR INLET: 0.25 INCH IMPACT RATE: 4000 BPM

DISPOSABLE GLOVES, POWDER FREE, NONSTERILE; AMBIDEXTROUS; SZ MEDIUM UI BX/50EA (LATEX-FREE, NITRILE)

BAG,TOOL

CUTTER, HYDRAULIC, PORTABLE: COMPONENTS: HYDRAULIC HAND PUMP, HYDRAULIC HOSE, PRESSURE GAGE, CUTTING ASSEMBLY PRESSURE CAPACITY: 20 TONS CUTTING CAPACITY: 1.25 INCHES OPERATING PRESSURE: 10,000 PSI CASE: KIT BAG FUNCTIONAL DESCRIPTION: CAPABLE OF CUT

BRUSH, WIRE, ROTAY END: SEE DESCRIPTION IN CONTRACT. USA MADE.

HOLDER PAD,ABRASIVEK: DIAMETER: 3 INCHES MANDREL DIAMETER: 0.25 INCH MANDREL LENGTH: 1.625INCHES MAX SPEED RATING: 20,000 RPM MIN THREAD SZ ANDSERIES: 1/4-20 UNC MATERIAL: HIGH DENSITYRUBBERFEATURES: ATTACHMENT TYPE/METHOD IS TR (PARTIALDESCRIPTION)

WRENCH, OPEN END: IAW ASME B107.100-2020, FLAT WRENCHES. CAT 6 WRENCH,BOX FORMERLY 1B107.6-1 CAT 8 ADJUSTABLE WRENCHES FORMERLY 1B107.8 CAT 9 BOX WRENCHES, DOUBLE HEADFORMERLY 1B107.9 CAT 21WRENCH, CROWFOOT FORMERLY1B107.21 CAT 39 OPEN ENDWRENCHES, D

WRENCH, BOX: TYPE I: SLUGGING WRENCH (STRAIGHT SHANK) OVERALL LENGTH: 10 INCHES WRENCH SZ: 3-3/8 INCHES MATERIAL: STEEL COATING: OXIDE (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

SOCKET,SOCKET WRENCH SNAP-ON INC P/N: STMM9

SOCKET,SOCKET WRENCH SNAP-ON INC P/N: STMM9

SOCKET,SOCKET WRENCH SNAP-ON INC P/N: STMM9

WRENCH SET,COMBINAT AS954H WRENCHES, HAND,TWELVE POINT, HIGH STRENGTH, THIN WALL TYPE II:WRENCHES, BOX CLASS 4: COMBINATION, BOX AND OPEN END WRENCH STYLE B: SHORT LENGTH COMPONENT QUANTITY: 10 WRENCH OPENINGS: SET CONSISTS OF ONE (1) EACHOF THE FOLL

SOCKET, SOCKET WRENCH: IAW THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.5M-2002. TYPE I: SOCKETS (6-POINT) CLASS 2: LONG LENGTH SQUARE DRIVE SZ: 1/4 INCH WRENCHING OPENING: 13 MM MATERIAL: STEEL COATING: CHROME (EXCEPTIONS APPLY) (PARTIAL

SOCKET,SOCKET WRENCH SNAP-ON INC P/N: STMM9

BLADE, RECIPROCATING SAW: SHANK TYPE: UNIVERSALSHANK LENGTH: 0.5 INCH BACK TYPE: STRAIGHT OVERALL LENGTH: 6 INCHES (+/- 0.25 INCH) OVERALL HEIGHT: 0.75 TO 1 INCH MIN/MAX THICKNESS: 0.030 INCH TEETH QUANTITY: 18 TPIMATERIAL: HIGH SPEED STEEL FEATURES: