MID-CONTINENT MACHINING INC

PUNCH, ASSEMBLY: IAW NAVY DEPARTMENT, BUREAU OF SHIPS DRAWING NUMBER 840327 REVISION E, DATED JULY 24, 1987. PIECE NUMBERS 16, 19. FOR 1-3/4 INCH TO 4 INCHES AND 4-3/4 INCHES DETACHABLE LINK PIECE 16 IS DIAMETER B ON TABLE = 20 DIFFERENT SZS PIECE 19

SOCKET, SOCKET WRENCH: IAW NAVAL AVIATION DEPOT, U. S. MARINE CORPS AIR STATION DRAWING 18C2268 REVISION A, DATED AUGUST 13, 2001. PN 18C2268-2 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

PUNCH, DRIVE PIN: IAW NAVY DEPARTMENT, BUREAU OF SHIPS, DRAWING NUMBER S2603-840327, REV. D, DATED 12/28/1966 PIECE NUMBERS 14 AND 15 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

HANDLE, PUNCH: IAW NAVY BUREAU OF SHIPS DRAWING NUMBER S2603-840327, REVISION D DATED 12/28/66 PIECE NUMBER: 15 SZ: 1-3/8 INCHES (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

PULLERS, MECHANICAL: MSP: 28

EXTRACTOR TOOL, BORESCOPE PLUG: IAW PRATT & WHITNEY AIRCRAFT DRAWING NUMBER PWA 51927 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

INSERTER, SEAL: IAW U. S. ARMY TANK AUTOMOTIVE COMMAND DRAWING NUMBER 11629671, DATED 02-26-80. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, OPEN END: IAW ASME B107.100-2020, FLAT WRENCHES. CAT 6 WRENCH,BOX FORMERLY 1B107.6-1 CAT 8 ADJUSTABLE WRENCHES FORMERLY 1B107.8 CAT 9 BOX WRENCHES, DOUBLE HEADFORMERLY 1B107.9 CAT 21WRENCH, CROWFOOT FORMERLY1B107.21 CAT 39 OPEN ENDWRENCHES, D

INSERTER, BEARING AND BUSHING: IAW SIKORSKY AIRCRAFT DRAWING 65700-40030, DATED 04-02-71, AND REV A, DATED 02-28-72. PIECE NUMBER 041. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, ADJUSTABLE: OVERALL LENGTH: 24 INCHES JAW CAPACITY: 1-3/8 TO 2-7/8 INCHES AND 1-7/16 TO 2-5/16 INCHES MATERIAL: STEEL COATING: CHROME OR NICKEL FEATURES: TWO ADJUSTABLE JAWS WITH 1/8 INCH BETWEEN HOLES; ADJUSTMENT PINS PROVIDED (EXCEPTIONS AP

COMPRESSOR, SEAL: IAW SIKORSKI AIRCRAFT DRAWINGNUMBER 65700-65143 DATED 13 SEPT 1972 PN 65700-65143-101 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

EXPANDER, PISTON SEAL: IAW SIKORSKY AIRCRAFT DRAWING NUMBER 65700-65139, DATED 13 SEP 72, DRAWING P/N 101 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

COMPRESSOR, SEAL: IAW SIKORSKY AIRCRAFT DRAWING NUMBER 65700-65138, DATED SEPTEMBER 14, 1972. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

EXPANDER, PISTON SEAL: IAW SIKORSKY AIRCRAFT DRAWING NUMBER 65700-65137, DWG P/N -101, DATED 13 SEP 72 EXCEPTION TO DRAWING: COATING: NICKEL, PHOSPHATE OR BLACK OXIDE IN LIEU OF CADMIUM PLATING (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

EXTRACTOR TOOL, BORESCOPE PLUG: IAW PRATT & WHITNEY AIRCRAFT DRAWING NUMBER PWA 51927 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, OPEN END: IAW ASME B107.100-2020, FLAT WRENCHES. CAT 6 WRENCH,BOX FORMERLY 1B107.6-1 CAT 8 ADJUSTABLE WRENCHES FORMERLY 1B107.8 CAT 9 BOX WRENCHES, DOUBLE HEADFORMERLY 1B107.9 CAT 21WRENCH, CROWFOOT FORMERLY1B107.21 CAT 39 OPEN ENDWRENCHES, D

INSERTER, BEARING AND BUSHING: IAW SIKORSKY AIRCRAFT DRAWING 65700-40030, DATED 04-02-71, AND REV A, DATED 02-28-72. PIECE NUMBER 041. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

INSERTER, SEAL: IAW DEPARTMENT OF THE ARMY, ORDNANCE CORPS, DRAWING NUMBER 10914188, DATED 11/16/1961 COATING: PHOSPHATE EXCEPTIONS TO DRAWING: FINISH: USE DOD-P-16232 IN LIEU OF MIL-P-16232. MATERIAL: USE ASTM A304 (ALLOY STEEL BARS TO END QUENCH HA

LIFTER, ROAD WHEEL: IAWORDNANCE CORPS DEPT OF THE ARMY DETROIT ARSENALDRAWING NUMBER 7010355,DATED 19 MARCH 57, REVISION C, DATED 5 DEC 74. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, OPEN END: IAW ASME B107.100-2020, FLAT WRENCHES. CAT 6 WRENCH,BOX FORMERLY 1B107.6-1 CAT 8 ADJUSTABLE WRENCHES FORMERLY 1B107.8 CAT 9 BOX WRENCHES, DOUBLE HEADFORMERLY 1B107.9 CAT 21WRENCH, CROWFOOT FORMERLY1B107.21 CAT 39 OPEN ENDWRENCHES, D

WRENCH, ADJUSTABLE: OVERALL LENGTH: 24 INCHES JAW CAPACITY: 1-3/8 TO 2-7/8 INCHES AND 1-7/16 TO 2-5/16 INCHES MATERIAL: STEEL COATING: CHROME OR NICKEL FEATURES: TWO ADJUSTABLE JAWS WITH 1/8 INCH BETWEEN HOLES; ADJUSTMENT PINS PROVIDED (EXCEPTIONS AP

WRENCH, OPEN END: IAW ASME B107.100-2020, FLAT WRENCHES. CAT 6 WRENCH,BOX FORMERLY 1B107.6-1 CAT 8 ADJUSTABLE WRENCHES FORMERLY 1B107.8 CAT 9 BOX WRENCHES, DOUBLE HEADFORMERLY 1B107.9 CAT 21WRENCH, CROWFOOT FORMERLY1B107.21 CAT 39 OPEN ENDWRENCHES, D

INSERTER, BEARING AND BUSHING: IAW SIKORSKY AIRCRAFT DRAWING 65700-40030, DATED 04-02-71, AND REV A, DATED 02-28-72. PIECE NUMBER 041. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, ELECTRICAL CONNECTOR: IAW U.S. ARMY AVIATION AND MISSILE COMMAND DRAWING NUMBER 9177395, DATED APRIL 17, 1974. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

ALIGNMENT TOOL, BRUSH BLOCK: IAW U.S. ARMAMENT RESEARCH AND DEVELOPMENT COMMAND DRAWING 12979832, REVISION A DATED 04-23-1997. (PARTIAL DESCRIPTION)

WRENCH, OPEN END: IAW ASME B107.100-2020, FLAT WRENCHES. CAT 6 WRENCH,BOX FORMERLY 1B107.6-1 CAT 8 ADJUSTABLE WRENCHES FORMERLY 1B107.8 CAT 9 BOX WRENCHES, DOUBLE HEADFORMERLY 1B107.9 CAT 21WRENCH, CROWFOOT FORMERLY1B107.21 CAT 39 OPEN ENDWRENCHES, D

SOCKET, SOCKET WRENCH: IAW NAVAL AVIATION DEPOT, U. S. MARINE CORPS AIR STATION DRAWING 18C2268 REVISION A, DATED AUGUST 13, 2001. PN 18C2268-2 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, PISTON: IAW U.S. ARMY ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER DRAWING 12984937 USED ON: M230 AUTOMATIC CANNON (30MM). FEATURES: STEEL; T-HANDLE; 3 INCH HANDLE; 3 INCH STEM (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

8507842438!

8509768671!

8507384870!

GAGE, RIGGING: IAW U.S. ARMY MISSILE COMMAND DRAWING NUMBER 13025007, REV. D, DATED 4/26/1996 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

8511606214!PUNCH,DRIVE PIN

WRENCH, SPANNER: IAW U.S. ARMY ARMAMENT RESEARCH DEVELOPMENT AND ENGINEERING CENTER, PICATINNY ARSENAL, DRAWING NUMBER 12576998, DATED 1/15/1989 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

PUNCH, ASSEMBLY: IAW NAVY DEPARTMENT, BUREAU OF SHIPS DRAWING NUMBER 840327 REVISION E, DATED JULY 24, 1987. PIECE NUMBERS 16, 19. FOR 1-3/4 INCH TO 4 INCHES AND 4-3/4 INCHES DETACHABLE LINK PIECE 16 IS DIAMETER B ON TABLE = 20 DIFFERENT SZS PIECE 19

8511013056!

8510890072!

8510934018!

8511580205!JACK,SCREW,HAND

INSERTER, SEAL: IAW GSA DRAWING NUMBER 896-8097, DATED 2/1/74 (PARTIAL DESCRIPTION)

8511568806!CONNECTOR,BALL PULL

WRENCH ASSEMBLY: - SEE ATTACHED DOCUMENT FOR DETAIL.

GAGE, PISTON OIL COOLING PIPE: IAW GENERAL MOTORS CORPORATION, ELECTRO-MOTIVE DIVISION, DRAWINGNUMBER 8071720 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

8510641191!

8510218326!

8510090261!FIXTURE ASSEMBLY,TR

8510151131!

8511544954!WRENCH,SPECIAL

WRENCH, OPEN END: IAW ASME B107.100-2020, FLAT WRENCHES. CAT 6 WRENCH,BOX FORMERLY 1B107.6-1 CAT 8 ADJUSTABLE WRENCHES FORMERLY 1B107.8 CAT 9 BOX WRENCHES, DOUBLE HEADFORMERLY 1B107.9 CAT 21WRENCH, CROWFOOT FORMERLY1B107.21 CAT 39 OPEN ENDWRENCHES, D

SOCKET, SOCKET WRENCH: IAW PROPRIETARY DRAWING OSHKOSH TRUCK CORPORATION DRAWING NUMBER 3335074; ACQUISITION IS LIMITED ONLY TO OSHKOSH. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)