Federal Contract Opportunities
Showing 2,401-2,450 of 2,697 opportunities
These are federal procurement opportunities from SAM.gov for businesses to provide goods and services to government agencies.
TACTICAL Broad Agency Announcement (BAA)
***SEE ATTACHMENTS FOR FULL TEXT OF ANNOUNCEMENT*** BROAD AGENCY ANNOUNCEMENT (BAA) FA9451-24-S-0001 Air Force Research Laboratory Directed Energy Directorate ANNOUNCEMENT OVERVIEW Initial 22 November 2023 NAICS CODE: The NAICS Code for this acquisition is 541715 for Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology), and the small business size standard is 1,000 employees. FEDERAL AGENCY NAME: Air Force Research Laboratory, Directed Energy Directorate (AFRL/RD) BROAD AGENCY ANNOUNCEMENT TITLE: TACTICAL BROAD AGENCY ANNOUNCEMENT TYPE: This is the Initial Announcement of BAA FA9451-24-S-0001, BAA With Closed Calls BROAD AGENCY ANNOUNCEMENT NUMBER: FA9451-24-S-0001 CATALOG OF FEDERAL DOMESTIC ASSISTANCE (CFDA) NUMBER(S): Not Applicable (N/A). No assistance instrument or CFDA opportunities exist under this announcement. BRIEF PROGRAM SUMMARY: This is a five (5) year Broad Agency Announcement (BAA) describing the research areas of interest for the Directed Energy Directorate. This BAA approach allows for proposal submittals at a specified date and time, which will be posted through the issuance of Calls at various times against this BAA. This BAA will be reviewed no less frequently than annually and updates will be published in the System for Award Management (SAM) (https://sam.gov). Any changes or cancellation of the BAA will be posted as amendments to this BAA. This annual review and subsequent amendment to the BAA shall meet the requirement of Federal Acquisition Regulation (FAR) 35.016 to publish the BAA no less frequently than annually. As technical requirements are identified, Calls may be issued in SAM.gov to request proposals for specific research efforts. These subsequent Calls will contain specific descriptions of the research effort to be addressed, anticipated period of performance, information peculiar to the specific research technical topic area, and the estimated funding profile for the Call. PROPOSAL DUE DATE AND TIME: NO PROPOSALS SHOULD BE SUBMITTED AGAINST THIS OVERARCHING BAA. Proposal due dates and times will be specified in each Call announcement. Proposals received after the due date and time specified in the Call shall be governed by the provisions of the FAR 52.215-1(c)(3). It should be noted that this installation observes strict security procedures to enter the facility. These security procedures are NOT considered an interruption of normal Government processes, and proposals received after the due date and time specified in the Call because of security delays will be considered late”. Furthermore, note that if offerors utilize commercial carriers in the delivery of proposals, they may not honor time-of-day delivery guarantees on military installations. Early proposal submission is encouraged. GENERAL INFORMATION: This acquisition is unrestricted. This BAA is issued under the provisions of FAR 6.102(d)(2) that provides for the competitive selection of research proposals. Proposals submitted in response to this BAA that are selected for award are considered to be the results of full and open competition and in full compliance with the provisions of PL 98-369, the Competition In Contracting Act of 1984. Offerors MUST monitor SAM in the event this announcement is amended, and for the posting of Calls. ANNOUNCEMENT MODIFICATIONS: Due to the dynamically evolving nature of US warfighter directed energy needs, this announcement is potentially subject to include updates, revisions, or additional topic areas. Therefore, Offerors are highly encouraged to continually monitor SAM to ensure they receive latest guidance to this announcement. TYPE OF CONTRACTS/INSTRUMENTS: The Air Force reserves the right to award the instrument best suited to the nature of research proposed. Accordingly, the Government may award any appropriate contract type under the Federal Acquisition Regulation. The Government anticipates that a mix of contract types will be used throughout the life of this BAA. Generally, awards under this announcement may be Cost-Plus-Fixed Fee (Completion and Term), Cost Contract, or Firm Fixed Price. There are no opportunities for Other Transactions, Grants, Cooperative Agreements, or other types of non-FAR instruments under this announcement. Cost-type contracts will require successful Offerors to have an accounting system deemed adequate by Defense Contract Audit Agency (DCAA) for tracking costs under a cost reimbursable contract (DFARS 242.75). If an Offeror does NOT have a DCAA approved accounting system, a cost-type contract cannot be awarded. ANNUAL REPRESENTATIONS AND CERTIFICATIONS: Potential offerors are notified that effective 01 Jan 2005 to be eligible for an award and in compliance with FAR 52.204-7 and DFARS 252.204-7007 Alternate A, they must submit Annual Representations and Certifications, via SAM.gov. Before submitting the electronic Annual Representations and Certifications, Contractors must be registered in the SAM Database. Online registration instructions can be accessed from the SAM at https://sam.gov. These FAR and DFAR level representations and certifications are required in addition to the representations and certifications that may be attached to each Call. ESTIMATED PROGRAM COST: Anticipated funding for the program (not per Call, contract, or award): FY24 FY25 FY26 FY27 FY28 TOTAL $100M $100M $100M $100M $99M $499M This funding profile is an estimate only and will not be a contractual obligation for funding. All funding is subject to change due to Government discretion and availability. All potential offerors should be aware that due to unanticipated budget fluctuations, funding in any or all areas may change with little or no notice. ANTICIPATED NUMBER OF AWARDS: The Air Force anticipates awarding a minimum of one contract per specific Call. However, the Air Force reserves the right to make multiple awards or no awards pursuant to a Call. There is no limit on the number of contracts that may be awarded to an individual Offeror. SYSTEM FOR AWARD MANAGEMENT (SAM) REGISTRATION: Before the Government can award a contract, an Offeror must be registered in the System for Award Management (SAM). It is in the Offeror’s interest to visit SAM and ensure that all the Offeror’s data is up to date from SAM and other databases to avoid delay in award. SAM allows firms interested in conducting business with the federal government to provide basic information on business capabilities and financial information. To register, visit https://www.sam.gov. POINT OF CONTACT: a) Administrative, technical, or contractual questions should be sent via e-mail to afrl.rdlb.tacticalbaa@us.af.mil. All requests must include a name, e-mail address, and phone number of an organizational point of contact. b) Each Call will include specific contracting points of contact. Amendment 1 – FY24 Request for Executive Summaries for Topic Area Group Inclusion (15 December 2023) Under the Air Force Research Laboratory (AFRL) TACTICAL Broad Agency Announcement (BAA), FA945124S0001, posted on SAM.gov on 22 November 2023, AFRL is issuing this Call for Executive Summaries for inclusion into Topic Area Groups (TAGs). The Government is interested in Executive Summaries as directed in Section VII of the BAA announcement. Executive Summaries shall be tailored to one specific Topic Area. Any offeror wishing to be considered for inclusion to multiple TAGs shall submit an Executive Summary for each TAG desired. Topic Areas are listed in Section I Paragraph 5 of the BAA announcement. Submission instructions are included in Section VII of the BAA announcement. Executive Summary Review and Evaluation Procedures are listed in Section VIII of the BAA announcement. Executive Summaries will be accepted from 1 January 2024 through 1600 MST on 31 January 2024. AFRL intends to announce TAG members by 15 March 2024. TACTICAL Organizational Mailbox: afrl.rdlb.tacticalbaa@us.af.mil Offerors shall use the following naming convention for the Subject Line of the email submission: “Topic Area X: Company Name, (CAGE: XXXXX)” ***DO NOT SUBMIT CLASSIFIED EXECUTIVE SUMMARIES – If it is necessary to submit a classified Executive Summary, first send an unclassified request to the TACTICAL Org Mailbox for specific submission instructions*** (End of Amendment) Amendment 2 – Revision to FY24 Topic Area Group Inclusion (13 February 2024) AFRL has revised the date it intends to announce TAG members. AFRL now intends to announce TAG members by 29 March 2024. (End of Amendment) Amendment 3 –FY24 Topic Area Group Members (28 March 2024) AFRL is pleased to announce the establishment of the TACTICAL Topic Area Groups (TAG). NOTE: There is no appeal process for any Executive Summary (ES) submission evaluated as “Selected” or “Not Selected”. The only feedback that will be provided is captured under the Executive Summary Review Forms provided as a response to Offeror Executive Summaries. For any Offerors not included in the TAG list below, AFRL welcomes Offerors to submit an ES for inclusion in topic areas in response to any future TACTICAL Request for Executive Summary announcements on this Broad Agency Announcement (BAA). However, executive Summaries will only be accepted during the time periods specified in TACTICAL Requests for Executive Summary announcements posted to this announcement. The Selected/Technically Qualified TACTICAL Topic Area Group (TAG) Members as of 28 March 2024 are as follows: Topic Area 1: Laser Sources Arete Associates, CAGE: 8N501 Ball Aerospace, CAGE: 1KPW4 Blue Halo, CAGE: 0EXA1 Boeing, CAGE: 0YBJ7 EO Solutions, CAGE: 9KC43 II-VI, CAGE: 22669 Kratos Defense, CAGE: 0WJV2 Leidos, CAGE: 5UTE0 Lockheed Martin, CAGE: 0WMS3 Northrop Grumman, CAGE: 11982 Physical Sciences, CAGE: 8K901 Raytheon, CAGE: 4U884 Stellar Science, CAGE: 1MZG2 Tau Technologies, CAGE: 35PU6 Topic Area 2: Aero-Effects & Beam Control Ball Aerospace, CAGE: 13993 Blue Halo, CAGE: 0EXA1 Boeing, CAGE: 0YBJ7 EO Solutions, CAGE: 9KC43 II-VI, CAGE: 22669 Leidos, CAGE: 5UTE0 Lockheed Martin, CAGE: 0WMS3 Northrop Grumman, CAGE: 11982 Radiance Technologies, CAGE: 1H1J5 Raytheon, CAGE: 4U884 Verus Research, CAGE: 73S36 Topic Area 3: Laser System Technologies, Integration and Demonstration Ball Aerospace, CAGE: 1KPW4 BlueHalo, CAGE: 0EXA1 Boeing, CAGE: 0YBJ7 EO Solutions, CAGE: 9KC43 II-VI, CAGE: 22669 Kratos Defense, CAGE: 0WJV2 Leidos, CAGE: 5UTE0 Lockheed Martin, CAGE: 0WMS3 Northrop Grumman, CAGE: 11982 Radiance Technologies, CAGE: 1H1J5 Raytheon, CAGE: 4U884 Tau Technologies, CAGE: 35PU6 Topic Area 4: Laser System Modeling & Simulation AMP Research, CAGE: 0M5Z2 Ball Aerospace, CAGE: 1KPW4 BlueHalo, CAGE: 0EXA1 Boeing, CAGE: 0YBJ7 EO Solutions, CAGE: 9KC43 II-VI, CAGE: 22669 Leidos, CAGE: 5UTE0 Lockheed Martin, CAGE: 0WMS3 Northrop Grumman, CAGE: 11982 Radiance Technologies, CAGE: 1H1J5 Raytheon, CAGE: 4U884 Stellar Science, CAGE: 1MZG2 Survice, CAGE: 7T988 Tau Technologies, CAGE: 35PU6 Topic Area 5: Laser Interaction Testing Ball Aerospace, CAGE: 1KPW4 Boeing, CAGE: 0YBJ7 Leidos, CAGE: 5UTE0 Lockheed Martin, CAGE: 0WMS3 Radiance Technologies, CAGE: 1H1J5 Raytheon, CAGE: 4U884 Topic Area 6: Laser Interaction Modeling and Simulation (M&S) Ball Aerospace, CAGE: 1KPW4 Boeing, CAGE: 0YBJ7 Lockheed Martin, CAGE: 0WMS3 Radiance Technologies, CAGE: 1H1J5 Raytheon, CAGE: 4U884 Stellar Science, CAGE: 1MZG2 Tau Technologies, CAGE: 35PU6 Topic Area 7: Laser Vulnerability Assessments Ball Aerospace, CAGE: 1KPW4 Boeing, CAGE: 0YBJ7 Leidos, CAGE: 5UTE0 Lockheed Martin, CAGE: 0WMS3 Radiance Technologies, CAGE: 1H1J5 Raytheon, CAGE: 4U884 Stellar Science, CAGE: 1MZG2 Survice, CAGE: 7T988 Topic Area 8: Satellite Custody and Characterization (SCC) Arete Associates, CAGE: 8N501 BlueHalo, CAGE: 0EXA1 Boeing, CAGE: 0AMC0 EO Solutions, CAGE: 9KC43 Lockheed Martin, CAGE: 06887 Radiance Technologies, CAGE: 1H1J5 Raytheon, CAGE: 4U884 Stellar Science, CAGE: 1MZG2 Tau Technologies, CAGE: 35PU6 Topic Area 9: Identification (ID) and Characterization Using Alternate Electro-Optics (EO) Phenomenologies Arete Associates, CAGE: 8N501 Ball Aerospace, CAGE: 13993 BlueHalo, CAGE: 0EXA1 Boeing, CAGE: 0AMC0 II-VI, CAGE: 22669 Lockheed Martin, CAGE: 06887 Radiance Technologies, CAGE: 1H1J5 Raytheon, CAGE: 4U884 Stellar Science, CAGE: 1MZG2 Topic Area 10: Artificial Intelligence (AI) and Autonomy for Space Domain Awareness (SDA) Ball Aerospace, CAGE: 13993 BlueHalo, CAGE: 0EXA1 Boeing, CAGE: 0AMC0 EO Solutions, CAGE: 9KC43 Lockheed Martin, CAGE: 65113 Maxar, CAGE: 3M4K0 Radiance Technologies, CAGE: 1H1J5 Raytheon, CAGE: 4U884 Stellar Science, CAGE: 1MZG2 Tau Technologies, CAGE: 35PU6 True Anomaly, CAGE: 9BGF6 Verus Research, CAGE: 73S36 Topic Area 11: High Power Electromagnetics (HPEM) Modeling and Effects BlueHalo, CAGE: 0EXA1 Epirus, CAGE: 86E60 Leidos, CAGE: 5UTE0 Sem-Sol, CAGE: 7F6M2 Stellar Science, CAGE: 1MZG2 Survice, CAGE: 7T988 Verus Research, CAGE: 73S36 Topic Area 12: HPEM Sources and Components BlueHalo, CAGE: 0EXA1 Epirus, CAGE: 86E60 Leidos, CAGE: 5UTE0 Raytheon, CAGE: 15090 Sem-Sol, CAGE: 7F6M2 Stellar Science, CAGE: 1MZG2 Verus Research, CAGE: 73S36 Topic Area 13: HPEM Applications BlueHalo, CAGE: 0EXA1 Epirus, CAGE: 86E60 Kratos Defense, CAGE: 0WJV2 Leidos, CAGE: 5UTE0 Raytheon, CAGE: 15090 Sem-Sol, CAGE: 7F6M2 Stellar Science, CAGE: 1MZG2 Verus Research, CAGE: 73S36 Topic Area 14: Wargaming BlueHalo, CAGE: 0EXA1 Lockheed Martin, CAGE: 0WMS3 Radiance Technologies, CAGE: 1H1J5 Raytheon, CAGE: 4U884 Stellar Science, CAGE: 1MZG2 Survice, CAGE: 7T988 Tau Technologies, CAGE: 35PU6 Verus Research, CAGE: 73S36 The TAG members listed above will be included in any future Request for Proposal (RFP) or Request for White Paper (RFWP) for Topic Area Groups. Inclusion in a Topic Area Group does not directly result in a specific contract award. Any future contracts under Topic Area Groups will be awarded based on evaluation of proposals or white papers solicited directly from established groups Topic Area Group members. Please note, regardless of Topic Area Group membership, at any time the Government may issue Standard Calls for any Topic Area under this TACTICAL BAA announcement. (End of Amendment) Amendment 4 – Revision to TACTICAL Science & Technology (S&T) Program Protection language (29 March 2024) The purpose of this amendment is to revise the TACTICAL Science & Technology (S&T) Program Protection language included in Section I paragraph 8 of the TACTICAL full text announcement included in the attachments. The revised paragraph is as follows: e. Science & Technology (S&T) Program Protection: Offerors notified that subsequent Call Announcements shall include a requirement for submission of: 1.) A completed Standard Form (SF 424), Research and Related Senior/Key Person Profile (Expanded) Form (See Attachments) for all Senior/Key Personnel proposed; and 2.) A Completed Security Program Questionnaire (See Attachments). Offerors may be asked to provide a mitigation plan for any identified S&T Protection risks. The Government reserves the right to determine an Offeror unawardable on the grounds of unacceptable S&T Protection risk based on its review of the SF 424 and Security Program Questionnaire. During the security review process, if it is determined that personnel listed to perform work are identified as potentially having a conflict of interest/commitment, the Government will not award the contract at this time. (End of Amendment) Amendment 5 – Virtual Industry Day AFRL Directed Energy will be hosting a Virtual Industry Day. Date: Wednesday, 6 Nov 2024 Location: Virtual Only (Tentative platform: Microsoft Teams Conference) Schedule: 0900-1000 RDL Laser Division Q&A Session 1000-1100 RDS Space Electro-Optics Q&A Session 1300-1400 RDH High Power Electro-Magnetics Q&A Session 1400-1500 RDM Modeling, Simulation & Wargaming Q&A Session Discussion Level: Controlled Unclassified Information (CUI). Participants are required to have a current and active DD Form 2345 to access or participate in any virtual Q&A session Registered participants may attend one, some, or all the Q&A sessions REGISTRATION LINK: https://forms.osi.apps.mil/r/h8zZpZdnhT Registration closes Wednesday, 30 Oct 24 at 1700 MT. After the registration form is submitted, AFRL will verify the status of the DD Form 2345 and will send a confirmation email that the registration is complete. A subsequent email will be sent no later than 4 Nov 2024 with the links to the Q&A session. (End of Amendment) Amendment 6 – Revision to TACTICAL Science & Technology (S&T) Program Protection language and GFP Clause List (21 November 2024) The purpose of this amendment is to revise the TACTICAL Science & Technology (S&T) Program Protection language included in Section I paragraph 9 (formerly included in Section I paragraph 8) of the TACTICAL full text announcement included in the attachments. The revised paragraph is as follows: 9) Science & Technology (S&T) Program Protection: Offerors are notified that subsequent Call Announcements shall include a requirement for submission of the documents identified below. Offerors may be asked to provide a mitigation plan for any identified S&T Protection risks. The Government reserves the right to determine an Offeror unawardable on the grounds of unacceptable S&T Protection risk based on its review of the SF 424 and Security Program Questionnaire. During the security review process, if it is determined that personnel listed to perform work are identified as potentially having a conflict of interest/commitment, the Government will not award the contract. a) Security Risk Review. Each proposal submission will be subject to a Security Risk Review prior to selection for award. The Security Risk Review is applied to federally funded research designed to help protect Department of the Air Force Science and Technology (S&T) by identifying possible vectors of undue foreign influence. AFRL will follow all policy and procedures outlined in Air Force Research Laboratory (AFRL) Instruction AFRLI 61-113, Science and Technology Protection for the Air Force Research Laboratory and Department of the Air Force Instruction DAFI 63-101/20-101, Integrated Lifecycle Management. b) Security risk review for these subject proposals will be developed for all proposed Senior/Key personnel and “Covered Individuals”. These risk reviews will be based on information disclosed in a Research and Related Senior and Key Person Profile and Security Questionnaire. In addition, any accompanying or referenced documents, publicly available information, and information contained in internal U.S. Government databases will be utilized in risk reviews. Nationality or citizenship is not a factor in the security risk reviews. c) When considering all external engagements, AFRL incorporates a holistic decision-making process that encompasses technical and security factors. The security review method implemented by AFRL measures risk factors to identify the appropriate Risk Acceptance Level (RAL) within the organization. The objective analysis of the security risk factors is conducted to empower AFRL’s S&T leaders to make risk-informed decisions. The review process generally looks at five factors, or risk areas, but with authority for expanded review as noted in OSD R&E Memorandum dated 6 Jun 2023 t. The potential security risk factors are set forth below: Potential security risk factors: (see TACTICAL BAA Announcement_20241112 update in Attachments for image) Actions Required by Applicants at proposal or white paper submission: a. In accordance with AFRLI 61-113, S&T Protection, Applicants/Recipients are required to submit the following documentation with their proposal: (i) Standard Form 424, “Research and Related Senior and Key Person Profile (Expanded) AND (ii) Security Program Questionnaire AND (iii) “Privacy Act Statement” consent form for each Covered Individual that is also signed by the Applicant as that Individual’s Sponsor. In the event a security risk is identified, and the Government has determined the security risk exceeds the acceptable threshold, the Applicant/Recipient will be notified and informed of the termination/decline of award. The Government will only provide a general statement of the reasoning due to Government OPSEC measures. By submission of the Research and Related Senior Key Person Profile and Security Program Questionnaire, the Applicant agrees to comply with the following: a. To certify that each covered individual who is listed on the application has been made aware: (1) of all relevant disclosure requirements, including the requirements of 42 U.S.C. § 6605; and (2) that false representations may be subject to prosecution and liability pursuant to, but not limited to, 18 U.S.C. §§287, 1001, 1031 and 31 U.S.C. §§ 3729-3733 and 3802. See National Science and Technology Council Guidance for Implementing National Security Presidential Memorandum 33 (NSPM-33) on National Security Strategy for United States Government-Supported Research and Development (January 2022). b. To establish and maintain an internal process or procedure to address foreign talent programs, conflicts of commitment, conflicts of interest, and research integrity. c. To exercise due diligence to identify Foreign Components or participation by Senior/Key Personnel in Foreign Government Talent Recruitment Programs and agree to share such information with the Government upon request. Actions Required by Covered Individuals: a. Covered Individual. An individual who contributes in a substantive, meaningful way to the scientific development or execution of a research and development project proposed to be carried out with a research and development award from a Federal research agency; and is designated as a covered individual by the Federal research agency concerned. See 42 U.S.C. § 6605, Definitions. (For purposes of this BAA, “covered individuals” are all Senior/Key Personnel.) b. Federal law requires that all current and pending research support, as defined by 42 U.S.C. §6605, must be disclosed at the time of proposal submission, for all covered individuals. The Government may require an updated disclosure during the performance of any research project selected for funding. The Government will require an updated disclosure whenever covered individuals are added or identified as performing under the funded project. c. Covered Individuals are also required to sign the “Privacy Act Statement” and provide such signed statement to the applicant for submission with the proposal. d. Any decision to accept a proposal for funding under this announcement will include full reliance on the individual’s statements. Failure to report fully and completely all sources of project support and outside positions and affiliations may be considered a material statement within the meaning of the False Claims Act, 31 U.S.C. 3729, and constitute a violation of Federal law. Actions required by Performers during period of performance: a. Applicant/Recipient will be required to re-submit the Research and Related Senior and Key Person Profile as an annual requirement. In addition, whenever a new covered individual(s) is to be added or identified as performing under the funded project, a new Research and Related Senior and Key Person Profile will be required prior to continued performance. b. If, at any time, during performance of this award, the Applicant/Recipient learns that its Senior/Key Research Personnel (including any sub awardee personnel who receive this designation) are or are believed to be participants in a Foreign Government Talent Program or have Foreign Components with a strategic competitor or country with a history of targeting U.S. technology for unauthorized transfer, the Applicant/recipient will notify the Contracting/Grants Officer within 5 business days of awareness. c. This disclosure must include specific information as to the personnel involved and the nature of the situation and relationship. The Government will review this information and conduct any necessary fact-finding or discussion with the Applicant/Recipient. The Government’s determination on disclosure may include acceptance, mitigation, or termination of the award. d. Failure of the Applicant/Recipient to reasonably exercise due diligence to discover or ensure that neither it nor any of its Senior/Key Research Personnel involved in the subject award are participating in a Foreign Government Talent Program or have a Foreign Component with a strategic competitor or country with a history of targeting U.S. technology for unauthorized transfer may result in the Government exercising remedies in accordance with federal law and regulation. e. The provisions concerning this disclosure will be included in each award. f. The Applicant/Recipient will be required to flow down this provision to all sub awardees who have personnel designated as Senior/Key Research Personnel as a result of their involvement in the performance of the research. Additionally, the purpose of this amendment is to revise the TACTICAL Government Furnished Property Clause list in Section I paragraph 10 (formerly Section I paragraph 9) of the TACTICAL full text announcement included in the attachments. The revised paragraph is as follows: a) Government Furnished Property (GFP): To be determined for each award. In accordance with FAR 45.201(b), the contractor is responsible for all costs related to making the property available for use, such as payment of all transportation, installation, or rehabilitation costs. If GFP is requested in a proposal, the following clauses/provisions apply: (i) FAR 52.245-1 Government Property or FAR 52.245-1, Alt II if the resulting contract is with a nonprofit organization or applied research at nonprofit organizations (SEP 2021) (ii) FAR 52.245-9 Use and Charges (APR 2012) (iii) DFARS 252.245-7003, Contractor Property Management System Administration (APR 2012) (iii) DFARS 252.245-7005, Management and Reporting of Government Property (JAN 2024) (End of Amendment) Amendment 7 – FY25 Request for Executive Summaries for Topic Area Group Inclusion (13 December 2024) Under the Air Force Research Laboratory (AFRL) TACTICAL Broad Agency Announcement (BAA), FA945124S0001, posted on SAM.gov on 22 November 2023, AFRL is issuing this Call for Executive Summaries for inclusion into Topic Area Groups (TAGs). The Government is interested in Executive Summaries as directed in Section VII of the BAA announcement. Executive Summaries shall be tailored to one specific Topic Area. Any offeror wishing to be considered for inclusion to multiple TAGs shall submit an Executive Summary for each TAG desired. Topic Areas are listed in Section I Paragraph 5 of the BAA announcement. Submission instructions are included in Section VII of the BAA announcement. Executive Summary Review and Evaluation Procedures are listed in Section VIII of the BAA announcement. Executive Summaries will be accepted from 1 January 2025 through 1600 MST on 31 January 2025. AFRL intends to announce TAG members by 14 March 2025. NOTE: This request for Executive Summaries is only for entities not already included in a specific TAG. Entities already included in TAGs as posted in Amendment 3 to this BAA on 28 March 2024 are not required to re-apply for TAG inclusion by submitting an Executive Summary under this call unless they have previously been removed from a TAG. However, any entity that previously applied for a specific TAG but was NOT selected, or any entity that was removed from a specific TAG, may reapply for inclusion under this call. TACTICAL Organizational Mailbox: afrl.rdlb.tacticalbaa@us.af.mil Offerors shall use the following naming convention for the Subject Line of the email submission: “Topic Area X: Company Name, (CAGE: XXXXX)” ***DO NOT SUBMIT CLASSIFIED EXECUTIVE SUMMARIES – If it is necessary to submit a classified Executive Summary, first send an unclassified request to the TACTICAL Org Mailbox for specific submission instructions*** (End of Amendment) Amendment 8 – Revision to FY25 Topic Area Group Inclusion (18 March 2025) AFRL has revised the date it intends to announce the FY25 update to TAG members. AFRL now intends to announce updated TAG members by 28 March 2025. (End of Amendment) Amendment 9 – FY25 Topic Area Group Members (26 March 2025) AFRL is pleased to announce the selection of the FY25 TACTICAL Topic Area Groups (TAG). NOTE: There is no appeal process for any Executive Summary (ES) submission evaluated as “Selected” or “Not Selected”. The only feedback that will be provided is captured under the Executive Summary Review Forms provided as a response to Offeror Executive Summaries. For any Offerors not included in the TAG list below, AFRL welcomes Offerors to submit an ES for inclusion in topic areas in response to any future TACTICAL Request for Executive Summary announcements on this Broad Agency Announcement (BAA). However, executive Summaries will only be accepted during the time periods specified in TACTICAL Requests for Executive Summary announcements posted to this announcement. The Selected/Technically Qualified TACTICAL Topic Area Group (TAG) Members as of 26 March 2025 are as follows: Topic Area 1: Laser Sources Arete Associates, CAGE: 8N501 BAE Systems, CAGE: 13993 Blue Halo, CAGE: 0EXA1 Boeing, CAGE: 0YBJ7 Coherent, CAGE: 22669 EO Solutions, CAGE: 9KC43 Kratos Defense, CAGE: 0WJV2 L3 Harris, CAGE: 83A08 Leidos, CAGE: 5UTE0 Lockheed Martin, CAGE: 0WMS3 Northrop Grumman, CAGE: 11982 Physical Sciences, CAGE: 8K901 Raytheon, CAGE: 4U884 Stellar Science, CAGE: 1MZG2 Tau Technologies, CAGE: 35PU6 Topic Area 2: Aero-Effects & Beam Control BAE Systems, CAGE: 13993 Blue Halo, CAGE: 0EXA1 Boeing, CAGE: 0YBJ7 Cahaba Federal, CAGE: 9QDD5 Coherent, CAGE: 22669 EO Solutions, CAGE: 9KC43 Leidos, CAGE: 5UTE0 Lockheed Martin, CAGE: 0WMS3 Moog, CAGE: 94697 Northrop Grumman, CAGE: 11982 Radiance Technologies, CAGE: 1H1J5 Raytheon, CAGE: 4U884 Verus Research, CAGE: 73S36 Topic Area 3: Laser System Technologies, Integration and Demonstration BAE Systems, CAGE: 13993 Battelle, CAGE: 79986 BlueHalo, CAGE: 0EXA1 Boeing, CAGE: 0YBJ7 Cahaba Federal, CAGE: 9QDD5 Coherent, CAGE: 22669 EO Solutions, CAGE: 9KC43 Kratos Defense, CAGE: 0WJV2 L3 Harris, CAGE: 83A08 Leidos, CAGE: 5UTE0 Lockheed Martin, CAGE: 0WMS3 Northrop Grumman, CAGE: 11982 Radiance Technologies, CAGE: 1H1J5 Raytheon, CAGE: 4U884 Tau Technologies, CAGE: 35PU6 Verus Research, CAGE: 73S36 Topic Area 4: Laser System Modeling & Simulation AMP Research, CAGE: 0M5Z2 ATA Engineering, CAGE: 1PWF2 BAE Systems, CAGE: 13993 BlueHalo, CAGE: 0EXA1 Boeing, CAGE: 0YBJ7 Cahaba Federal, CAGE: 9QDD5 Coherent, CAGE: 22669 EO Solutions, CAGE: 9KC43 L3 Harris, CAGE: 83A08 Leidos, CAGE: 5UTE0 Lockheed Martin, CAGE: 0WMS3 Northrop Grumman, CAGE: 11982 Radiance Technologies, CAGE: 1H1J5 Raytheon, CAGE: 4U884 Stellar Science, CAGE: 1MZG2 Survice, CAGE: 7T988 Tau Technologies, CAGE: 35PU6 Topic Area 5: Laser Interaction Testing ATA Engineering, CAGE: 1PWF2 BAE Systems, CAGE: 13993 Battelle, CAGE: 79986 BlueHalo, CAGE: 0EXA1 Boeing, CAGE: 0YBJ7 Leidos, CAGE: 5UTE0 Lockheed Martin, CAGE: 0WMS3 Radiance Technologies, CAGE: 1H1J5 Raytheon, CAGE: 4U884 University of Rochester Laboratory for Laser Energetics; CAGE: 03CZ7 Topic Area 6: Laser Interaction Modeling and Simulation (M&S) ATA Engineering, CAGE: 1PWF2 BAE Systems, CAGE: 13993 Battelle, CAGE: 79986 BlueHalo, CAGE: 0EXA1 Boeing, CAGE: 0YBJ7 Lockheed Martin, CAGE: 0WMS3 Radiance Technologies, CAGE: 1H1J5 Raytheon, CAGE: 4U884 Stellar Science, CAGE: 1MZG2 Tau Technologies, CAGE: 35PU6 University of Rochester Laboratory for Laser Energetics; CAGE: 03CZ7 Verus Research, CAGE: 73S36 Topic Area 7: Laser Vulnerability Assessments ATA Engineering, CAGE: 1PWF2 BAE Systems, CAGE: 13993 BlueHalo, CAGE: 0EXA1 Boeing, CAGE: 0YBJ7 Cahaba Federal, CAGE: 9QDD5 Leidos, CAGE: 5UTE0 Lockheed ...
Multiple Award Schedule
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.
Multiple Award Schedule
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.
Multiple Award Schedule
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.
Multiple Award Schedule
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.
Fuel Dispenser Maintenance
This synopsis is for informational purposes only. This is not a request for quote and no solicitation exists. The Mission & Installation Contracting Command (MICC), Fort Drum, NY is seeking multiple businesses willing to enter into a Blanket Purchase Agreement (BPA) for fuel dispenser maintenance under North American Industry Classification System Code (NAICS) 811310: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance. The small business size standard for this industry is $12.5 million in average annual revenue. Services would include but are not limited to the following: The Contractor shall provide all necessary resources, management, personnel, materials, transportation, supplies, and equipment, except Government Furnished Property (GFP), necessary in repairing, replacing, testing and reprogramming of fuel dispensing systems, and all associated equipment in facilities. All equipment shall be tested and certified after installation to ensure proper working order. The reprogramming and verification testing shall be in federal and local codes, standards, and regulations requirements as applicable. All work shall be completed in accordance with NY state regulation NYCRR Part 613 and Federal regulation 40 CFR 280. The Contractor must be able to accept the Government Purchase Card (GPC). Calls over the $10,000 limit will be paid through Wide Area Workflow (WAWF). To register and access WAWF, go to https://wawf.eb.mil/. There will be times when the Government will utilize Unison Global in order to compete the calls. The Contractor shall register with Unison Global once the Master Blanket Purchase Agreement is signed. The website to register is http://www.unisonglobal.com. BPA's will be evaluated annually and may remain in place for up to five years. When establishing these BPAs the Government will consider: Price; Socio-economic status; past performance, where past performance information exists; and technical capabilities. IAW FAR 52.204-7 interested parties must be registered with the System for Award Management Registration (SAM) under NACIS code 811310. The registrations can be done through System for Award Management (SAM) for free at https://www.sam.gov/portal/public/SAM/. The Contractor will not receive a BPA until these registrations are completed. Any interested party should submit their UEID and CAGE Code to samuel.l.pendleton.mil.army.mil. and Jeff Frans at jeffery.l.frans.civ@army.mil. Any correspondence relating to this synopsis should have "fuel dispenser maintenance Master BPA" annotated in the subject field. If you are interested in entering into a new Master BPA with MICC Fort Drum, please reply to this email with your UEID and CAGE Code. Contractors that respond on or before 15 February 2024 will receive a Master BPA. Contractors that respond on or after 15 February 2024 will be added to our Interested Vendor list. Interested Vendors will be contacted to provide quotes when work is needed. If an Interested Vendor is selected for award, a Master BPA will be completed at that time. The period of performance for the MBPA will be 02 June 2024 to 01 June 2029.
Fuel Dispenser Maintenance
This synopsis is for informational purposes only. This is not a request for quote and no solicitation exists. The Mission & Installation Contracting Command (MICC), Fort Drum, NY is seeking multiple businesses willing to enter into a Blanket Purchase Agreement (BPA) for fuel dispenser maintenance under North American Industry Classification System Code (NAICS) 811310: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance. The small business size standard for this industry is $12.5 million in average annual revenue. Services would include but are not limited to the following: The Contractor shall provide all necessary resources, management, personnel, materials, transportation, supplies, and equipment, except Government Furnished Property (GFP), necessary in repairing, replacing, testing and reprogramming of fuel dispensing systems, and all associated equipment in facilities. All equipment shall be tested and certified after installation to ensure proper working order. The reprogramming and verification testing shall be in federal and local codes, standards, and regulations requirements as applicable. All work shall be completed in accordance with NY state regulation NYCRR Part 613 and Federal regulation 40 CFR 280. The Contractor must be able to accept the Government Purchase Card (GPC). Calls over the $10,000 limit will be paid through Wide Area Workflow (WAWF). To register and access WAWF, go to https://wawf.eb.mil/. There will be times when the Government will utilize Unison Global in order to compete the calls. The Contractor shall register with Unison Global once the Master Blanket Purchase Agreement is signed. The website to register is http://www.unisonglobal.com. BPA's will be evaluated annually and may remain in place for up to five years. When establishing these BPAs the Government will consider: Price; Socio-economic status; past performance, where past performance information exists; and technical capabilities. IAW FAR 52.204-7 interested parties must be registered with the System for Award Management Registration (SAM) under NACIS code 811310. The registrations can be done through System for Award Management (SAM) for free at https://www.sam.gov/portal/public/SAM/. The Contractor will not receive a BPA until these registrations are completed. Any interested party should submit their UEID and CAGE Code to samuel.l.pendleton.mil.army.mil. and Jeff Frans at jeffery.l.frans.civ@army.mil. Any correspondence relating to this synopsis should have "fuel dispenser maintenance Master BPA" annotated in the subject field. If you are interested in entering into a new Master BPA with MICC Fort Drum, please reply to this email with your UEID and CAGE Code. Contractors that respond on or before 15 February 2024 will receive a Master BPA. Contractors that respond on or after 15 February 2024 will be added to our Interested Vendor list. Interested Vendors will be contacted to provide quotes when work is needed. If an Interested Vendor is selected for award, a Master BPA will be completed at that time. The period of performance for the MBPA will be 02 June 2024 to 01 June 2029.
Fuel Dispenser Maintenance
This synopsis is for informational purposes only. This is not a request for quote and no solicitation exists. The Mission & Installation Contracting Command (MICC), Fort Drum, NY is seeking multiple businesses willing to enter into a Blanket Purchase Agreement (BPA) for fuel dispenser maintenance under North American Industry Classification System Code (NAICS) 811310: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance. The small business size standard for this industry is $12.5 million in average annual revenue. Services would include but are not limited to the following: The Contractor shall provide all necessary resources, management, personnel, materials, transportation, supplies, and equipment, except Government Furnished Property (GFP), necessary in repairing, replacing, testing and reprogramming of fuel dispensing systems, and all associated equipment in facilities. All equipment shall be tested and certified after installation to ensure proper working order. The reprogramming and verification testing shall be in federal and local codes, standards, and regulations requirements as applicable. All work shall be completed in accordance with NY state regulation NYCRR Part 613 and Federal regulation 40 CFR 280. The Contractor must be able to accept the Government Purchase Card (GPC). Calls over the $10,000 limit will be paid through Wide Area Workflow (WAWF). To register and access WAWF, go to https://wawf.eb.mil/. There will be times when the Government will utilize Unison Global in order to compete the calls. The Contractor shall register with Unison Global once the Master Blanket Purchase Agreement is signed. The website to register is http://www.unisonglobal.com. BPA's will be evaluated annually and may remain in place for up to five years. When establishing these BPAs the Government will consider: Price; Socio-economic status; past performance, where past performance information exists; and technical capabilities. IAW FAR 52.204-7 interested parties must be registered with the System for Award Management Registration (SAM) under NACIS code 811310. The registrations can be done through System for Award Management (SAM) for free at https://www.sam.gov/portal/public/SAM/. The Contractor will not receive a BPA until these registrations are completed. Any interested party should submit their UEID and CAGE Code to samuel.l.pendleton.mil.army.mil. and Jeff Frans at jeffery.l.frans.civ@army.mil. Any correspondence relating to this synopsis should have "fuel dispenser maintenance Master BPA" annotated in the subject field. If you are interested in entering into a new Master BPA with MICC Fort Drum, please reply to this email with your UEID and CAGE Code. Contractors that respond on or before 05 January 2024 will receive a Master BPA. Contractors that respond on or after 05 January 2024 will be added to our Interested Vendor list. Interested Vendors will be contacted to provide quotes when work is needed. If an Interested Vendor is selected for award, a Master BPA will be completed at that time. The period of performance for the MBPA will be 02 June 2024 to 01 June 2029.
Fuel Dispenser Maintenance
This synopsis is for informational purposes only. This is not a request for quote and no solicitation exists. The Mission & Installation Contracting Command (MICC), Fort Drum, NY is seeking multiple businesses willing to enter into a Blanket Purchase Agreement (BPA) for fuel dispenser maintenance under North American Industry Classification System Code (NAICS) 811310: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance. The small business size standard for this industry is $12.5 million in average annual revenue. Services would include but are not limited to the following: The Contractor shall provide all necessary resources, management, personnel, materials, transportation, supplies, and equipment, except Government Furnished Property (GFP), necessary in repairing, replacing, testing and reprogramming of fuel dispensing systems, and all associated equipment in facilities. All equipment shall be tested and certified after installation to ensure proper working order. The reprogramming and verification testing shall be in federal and local codes, standards, and regulations requirements as applicable. All work shall be completed in accordance with NY state regulation NYCRR Part 613 and Federal regulation 40 CFR 280. The Contractor must be able to accept the Government Purchase Card (GPC). Calls over the $10,000 limit will be paid through Wide Area Workflow (WAWF). To register and access WAWF, go to https://wawf.eb.mil/. There will be times when the Government will utilize Unison Global in order to compete the calls. The Contractor shall register with Unison Global once the Master Blanket Purchase Agreement is signed. The website to register is http://www.unisonglobal.com. BPAs will be evaluated annually and may remain in place for up to five years. When establishing these BPAs the Government will consider: Price; Socio-economic status; past performance, where past performance information exists; and technical capabilities. IAW FAR 52.204-7 interested parties must be registered with the System for Award Management Registration (SAM) under NACIS code 811310. The registrations can be done through System for Award Management (SAM) for free at https://www.sam.gov/portal/public/SAM/. The Contractor will not receive a BPA until these registrations are completed. Any interested party should submit their UEID and CAGE Code to samuel.l.pendleton.mil.army.mil. and Jeff Frans at jeffery.l.frans.civ@army.mil. Any correspondence relating to this synopsis should have "fuel dispenser maintenance Master BPA" annotated in the subject field. If you are interested in entering into a new Master BPA with MICC Fort Drum, please reply to this email with your UEID and CAGE Code. Contractors that respond on or before 05 January 2024 will receive a Master BPA. Contractors that respond on or after 05 January 2024 will be added to our Interested Vendor list. Interested Vendors will be contacted to provide quotes when work is needed. If an Interested Vendor is selected for award, a Master BPA will be completed at that time. The period of perforance for the MBPA will be 02 June 2024 to 01 June 2029.
ISO Container Repair- Fort Drum
This synopsis is for informational purposes only. This is not a request for quote and no solicitation exists. The Mission & Installation Contracting Command (MICC), Fort Drum, NY is seeking multiple businesses willing to enter into a Blanket Purchase Agreement (BPA) for ISO Container Repair under North American Industry Classification System Code (NAICS) 811310: Commercial and Industrial Machinery and Equipment Repair and Maintenance. The small business size standard for this industry is $12.5 million in average annual revenue. The active date for this Master BPA will be April 30, 2024- April 29, 2029. Services would include but is not limited to the following: The Contractor shall provide all necessary resources, management, personnel, materials, transportation, supplies, and equipment necessary in repairing ISO Containers in accordance with MIL-STD-3037 and all associated materials on Fort Drum, NY. Calls may be sporadic in nature. The Contractor must be able to accept the Government Purchase Card (GPC) for calls up to $25,000. All Calls over $25,000 will be paid through Wide Area Workflow (WAWF). The Contractor must be able to submit invoices in Wide Area Workflow (WAWF). To register and access WAWF, go to https://piee.eb.mil/. BPAs will be evaluated annually and may remain in place for up to five years. When establishing these BPAs the Government will consider: Price; Socio?economic status; past performance, where past performance information exists; and technical capabilities. IAW FAR 52.204?7 interested parties must be registered with the System for Award Management Registration (SAM) under NACIS code 811310. The registrations can be done through System for Award Management (SAM) for free at https://www.sam.gov/portal/public/SAM. The Contractor will not receive a BPA until these registrations are completed. Any interested party should submit their UEID, CAGE Code and capabilities statements to kayla.m.rogers14.civ@army.mil and jeffery.l.frans.civ@army.mil. Any correspondence relating to this synopsis should have "ISO Container Repair BPA" annotated in the subject field.
Q999--621 I – R4 Professional & Allied Healthcare Staffing Service Solicitation RFP-797-FSS-00-0115-R4 Including Amenments 0001-0005
This amendment incorporates revisions to clause 552.238-80 Industrial Funding Fee and Sales Reporting (July 2020, Tailored December 2023).
Building Technologies Research and Integration Center: Technology Collaborations for US Building Technologies Industries
Building Technologies Research and Integration Center Technology Collaborations for US Building Technologies Industries Oak Ridge National Laboratory (ORNL) is seeking industry partners to participate in short-term, collaborative projects within the Building Technologies Research and Integration Center (BTRIC) to accelerate development of new energy efficient building technologies. This opportunity will provide selected participants access to ORNL's experienced staff and unique equipment and capabilities to demonstrate advanced concepts with intent to develop and deploy innovative and energy efficient building technologies. Description UT-Battelle, LLC, acting under its Prime Contract No. DE-AC05-00OR22725 with the U.S. Department of Energy (DOE) for the management and operation of the Oak Ridge National Laboratory, conducts research and development in support of the DOE Building Technologies Office (BTO). The DOE Building Technologies Office partners with industry, small business, universities, and other stakeholders to identify and invest in innovative technologies with the potential to improve the energy productivity of buildings without sacrificing occupant comfort or product performance, as well to enhance the global competitiveness of the United States. ORNL is requesting cost-shared proposals from industry to assess applicability of technologies that can reduce the energy intensity of U.S. buildings by 35% by 2035, and 50% by 2050 relative to 2005. The mission of the Building Technologies Office is to develop and accelerate the adoption of cost-effective technologies, techniques, tools, and services that enable high-performing, energy-efficient, and demand-flexible residential and commercial buildings in both new and existing building markets. As part of the technology collaborations conducted under this announcement, the proposer will describe the potential energy savings and novel non-energy impacts that may be realized by the targeted project. Technology areas of interest HVAC, water heating, and appliances Windows and building envelope Solid-state lighting Building energy modeling Sensors and controls Advanced building construction Thermal energy storage Grid-interactive efficient buildings (GEB) Residential building integration Commercial building integration Projects will be conducted during a short-time period. At least 20% cost share, which can be funds-in to ORNL or in-kind contributions (e.g., facilities, services, and staff time), is required on the part of the industrial participant. Participant cost-share cannot be met using funds from U.S. Government sources. Funds will not be provided to the industrial participant by ORNL. The intent is to increase the in-kind cost share from 20% to 50% in the future, that timing to be determined and approved by BTO. Note: THIS IS NOT A PROCUREMENT REQUEST. Eligibility Eligibility is limited to industries that currently manufacture in the U.S. for commercial applications in the residential or commercial building technologies market, or to industries that will be able to do so as a direct result of these collaborative efforts. There is no restriction based on the particular building technology area, but should align with facilities, expertise, and capabilities of BTRIC. Background DOE's Building Technologies Research and Integration Center (BTRIC) at ORNL offers distinctive world-leading capabilities in building technologies, characterization facilities as well as leveraging advanced manufacturing capabilities at ORNL’s Manufacturing Demonstration Facility (MDF). The BTRIC provides a collaborative, shared infrastructure to help industry adopt innovative, energy efficient technologies that improve the energy productivity of buildings without sacrificing occupant comfort or product performance. ORNL’s expertise in building technologies, materials, and advanced manufacturing will assist the building industries in accelerating the developing of existing and new innovative technologies. More information about the ORNL BTRIC can be found at: https://www.ornl.gov/facility/btric From concept to commercialization, ORNL's world-leading facilities and expertise enable research focused on reducing the energy intensity of U.S. industry, supporting development of new products, and strengthening our nation's clean energy economy to meet the commercial and national security needs of tomorrow. Objective The objective of these BTRIC Technical Collaborations is to collaborate with industry to investigate, improve, develop, and deploy innovative energy efficient building technologies. In so doing, creating and preserving domestic jobs is a goal of this solicitation. The primary focus of this announcement is to target projects that will impact the following technical areas: HVAC, water heating, and appliances Windows and building envelope Solid-state lighting Building energy modeling Sensors and controls Advanced building construction Thermal energy storage Grid-interactive efficient buildings (GEB) Residential building integration Commercial building integration Laboratory Support It is anticipated that industrial partners will work collaboratively with members of the BTRIC staff to conduct project activities across the various areas of expertise within the BTRIC. Intellectual Property and Proprietary Data Projects will be performed with a Cooperative Research and Development Agreement (CRADA) or User Agreement as the contract instrument. See the announcement package for a sample CRADA agreement. DOE and ORNL respect the importance of industry's intellectual property and data security while balancing the need to document the benefits of public expenditures. Provisions relating to proprietary information and intellectual property are set forth in the CRADA. A Non-Disclosure agreement (NDA), if required, can be put into place during development of the project to facilitate discussions while protecting the partner's proprietary information. It is preferred that proprietary information NOT be included in the proposal. If company proprietary information is included in the proposal, the specific information should be marked as such, and UT- Battelle/ORNL will treat that information as business confidential. Proposal Guidelines Proposals should be completed using the attached template in the announcement package. Proposers are encouraged to consult with ORNL technical staff to develop a work scope that is technically feasible and compatible with ORNL facilities and capabilities. Proposal Deadline and Submission This announcement will remain open subject to availability of funding from the DOE Building Technologies Office. Completed proposals must be submitted in PDF file format by email to BTRICcollaboration@ornl.gov. The subject line should include: ORNL BTRIC Technology Collaborations. Receipt of proposals will be confirmed within one week of submission. Proposal Evaluation and Timeline This is an open announcement. Selection of winning proposals will be at the discretion of the DOE BTO. Proposal evaluation criteria will include compatibility with ORNL facilities and capabilities, technical feasibility and merit, the potential to commercialize new products and create US jobs, and the potential for buildings energy savings. BTO and the BTRIC reserve the right to select all, a portion, or none of the submissions. Point of Contact All questions relating to this announcement should be directed to Melissa Lapsa by email, lapsamv@ornl.gov, or by phone, (865) 576-8620. Cooperative Research and Development Agreement (CRADA) Information Awardees are required to enter into a short-form CRADA or User Agreement with UT-Battelle. Because of the need for accelerated placement and execution of the projects, the most favorable terms allowable within DOE guidelines have been established and will not be subject to negotiation. Failure to enter into a CRADA in a timely manner will result in termination of further project consideration. CRADAs have provisions that address the protection of the partners' existing proprietary information and intellectual property, as well as the information and intellectual property generated and made during the collaboration. More specifically, each party owns its own inventions while jointly developed inventions will be jointly owned. In all cases, U.S. Government will retain government use rights. CRADA durations are expected to be at least one year. For more specific terms and conditions, please review the model short-form CRADA and User Agreement template attached to this announcement.
Space Environment Technologies and Science (SETS) Broad Agency Announcement (BAA)
SPACE ENVIRONMENT TECHNOLOGIES AND SCIENCE (SETS) BROAD AGENCY ANNOUNCEMENT (BAA) FULL TEXT ANNOUNCEMENT 18 December 2023 NAICS: 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology) FEDERAL AGENCY: Air Force Research Laboratory, Geospace Environment Impacts and Applications Branch, 3550 Aberdeen Avenue SE, Kirtland AFB, NM 87117. BROAD AGENCY ANNOUNCEMENT TITLE: Space Environment Technologies and Science (SETS) Program BROAD AGENCY ANNOUNCEMENT TYPE: Closed BAA with Calls, One-Step or Two-Step PROPOSAL DUE DATE AND TIME: This BAA will remain for a period of 8 years from the date of publication. NO PROPOSALS OR WHITE PAPERS SHOULD BE SUBMITTED AGAINST THIS BASELINE BAA. Proposal or white paper due dates and times will be specified in each Call. Proposals or white papers received after the due date and time specified in the Call shall be governed by the provisions of FAR 52.215-1(c)(3). It should be noted that Air Force observes strict emailing security procedures. These email security procedures are NOT considered an interruption of normal Government processes, and proposals or white papers received after the above stated date and time because of security delays will be considered “late”. GENERAL INFORMATION: PROGRAM DESCRIPTION: Statement of Objectives: The Air Force Research Laboratory (AFRL) Space Vehicles Directorate (RV) Geospace Technologies Division (RVB) Geospace Environment Impacts and Applications Program is seeking sources capable of supporting the program’s research in space and environmental impacts technologies. Additionally, the program is interested in understanding and quantifying the impact of the space environment on Department of Defense and national security systems and in achieving a capability to specify, predict, mitigate, and exploit the effects of the space environment that can disrupt or degrade operational systems. Topics of particular interest include advanced environmental observing systems and specification and prediction models of solar activity, ionospheric conditions, magnetospheric activity, thermosphere, satellite drag and the reentry environment, cislunar environment, effects on communication, command, and control systems; effects on positioning, navigation, and timing (PNT) systems; effects on radar systems, and effects on spacecraft. Sources that enable future operational systems to meet performance, reliability, maintainability, supportability, and affordability goals, or which enhance performance or significantly reduce cost, schedule, or risk of existing technologies, are of particular interest. The Space Environment Technologies and Science (SETS) Program encompasses 5 technical areas which may be used in any combination per Call. These technical areas are as follows: Topic Areas: Solar, Solar Wind, and Ionospheric Effects The focus is to improve specification and prediction models of ionospheric conditions and phenomena that impact radio frequency signals such as for communications, PNT, and radar systems. Develop and couple advanced solar models with other space environment models such as ionospheric models to improve prediction capabilities. Develop novel approaches to and improve space- and ground-based solar, heliospheric, ionospheric, and magnetospheric instrumentation/data necessary to drive the models. Determine detailed association between environmental conditions and specific impacts on space systems and services. Characterize occurrences of specific environmental effects on space systems and services. Model the dynamics of the equatorial, subauroral, auroral, and polar ionosphere including small scale and irregular structure. Research and development of active experiment techniques, devices, delivery systems, diagnostics, models, and systems impacts. Thermosphere, Satellite Drag and the Reentry Environment The focus is to develop empirical and physics-based models, sensors, and data products to accurately specify and forecast the neutral atmosphere and satellite drag to identify space objects that orbit the Earth, to provide precision orbit determination and prediction, including reentry predictions, to assess the likelihood of collisions. Plasma Physics and Chemistry The focus is to investigate a variety of plasma states, from collisional to magnetized, as well as a variety of compositions, including typical atmospheric species as well as exotic neutral and ionized species and their reactions. Investigate plasma chemistry as related to the fundamentals of catalysis and energetic materials. Particle Effects and Radiation Belt Environment The focus is to specify and predict effects of charged particles on space operations. Improve models of the fluxes of radiation belt and plasma particles in space for use in space system design, mission planning, and other applications of climatological specification. Improve models and analysis of spacecraft charging. Conduct laboratory work in materials and interactions with the environment. Analyze space effects experiment results such as those from the DSX mission. Multi-phenomenology monitoring to provide asymmetric force advantage in sensing, assessment, and attribution of threats and hazards. Develop novel technologies to protect low Earth orbiting (LEO) satellites from the effects of high-altitude nuclear explosions (HANE). Investigate radio waves, specifically very low frequency, propagation in the radiation belt environment. Advance understanding of the interplay between waves and particles that underlie radiation belt dynamics, enabling better specification, forecasting, and mitigation. Cislunar Environment The focus is to develop models, sensors, and data products to accurately specify and forecast the Cislunar plasma and radiation environment in order to support the design and operation of vehicles in the cislunar environment depending upon orbit. Investigate environmental phenomenology of the Near-lunar environment including the radiation and plasma environment in the lunar wake as well as dust fountaining. Deliverable Items: Hardware, software, or data will be identified at the Call level. The following data deliverables are representative of the types of data that may be required: Final Scientific and Technical Reports Hardware created Software Created Significant End Items Monthly or Quarterly Status/Financial Reports Monthly or Quarterly Technical Reports Computer Program Documentation/Software User Manuals Computer Program/Software source code Presentation Materials Patent Reports Prototypes. Data deliverables are subject to negotiations on each individual award. Schedule: The period of performance will be stated in the Call. Organizational Conflict of Interest (OCI): Organizational Conflict of Interest, if applicable, will be determined and addressed at the Call level. System for Award Management (SAM): Unless an exemption in FAR 4.1102 applies, all offerors must: Be registered in the System for Award Management (SAM) prior to submitting a white paper or proposal Maintain an active SAM registration with current information at all times during the active award Provide its Unique Entity Identification number in each application or proposal it submits to the agency On-line registration instructions can be accessed from the SAM home page at www.sam.gov. Potential offerors that are notified to be eligible for an award must submit annual Electronic Representations and Certifications via the System for Award Management (SAM) website. These FAR and DFARS level representations and certifications are required in addition to the representations and certifications included in each Call. Before submitting the Electronic Representations and Certifications, contractors must be registered in the Systems for Award Management (SAM) Database. PLEASE REFER TO ATTACHMENT 1, FOR ADDITIONAL INFORMATION IN THE FULL TEXT ANNOUNCEMENT.
Space Environment Technologies and Science (SETS) Broad Agency Announcement (BAA)
SPACE ENVIRONMENT TECHNOLOGIES AND SCIENCE (SETS) BROAD AGENCY ANNOUNCEMENT (BAA) FULL TEXT ANNOUNCEMENT 18 December 2023 NAICS: 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology) FEDERAL AGENCY: Air Force Research Laboratory, Geospace Environment Impacts and Applications Branch, 3550 Aberdeen Avenue SE, Kirtland AFB, NM 87117. BROAD AGENCY ANNOUNCEMENT TITLE: Space Environment Technologies and Science (SETS) Program BROAD AGENCY ANNOUNCEMENT TYPE: Closed BAA with Calls, One-Step or Two-Step PROPOSAL DUE DATE AND TIME: This BAA will remain for a period of 8 years from the date of publication. NO PROPOSALS OR WHITE PAPERS SHOULD BE SUBMITTED AGAINST THIS BASELINE BAA. Proposal or white paper due dates and times will be specified in each Call. Proposals or white papers received after the due date and time specified in the Call shall be governed by the provisions of FAR 52.215-1(c)(3). It should be noted that Air Force observes strict emailing security procedures. These email security procedures are NOT considered an interruption of normal Government processes, and proposals or white papers received after the above stated date and time because of security delays will be considered “late”. GENERAL INFORMATION: PROGRAM DESCRIPTION: Statement of Objectives: The Air Force Research Laboratory (AFRL) Space Vehicles Directorate (RV) Geospace Technologies Division (RVB) Geospace Environment Impacts and Applications Program is seeking sources capable of supporting the program’s research in space and environmental impacts technologies. Additionally, the program is interested in understanding and quantifying the impact of the space environment on Department of Defense and national security systems and in achieving a capability to specify, predict, mitigate, and exploit the effects of the space environment that can disrupt or degrade operational systems. Topics of particular interest include advanced environmental observing systems and specification and prediction models of solar activity, ionospheric conditions, magnetospheric activity, thermosphere, satellite drag and the reentry environment, cislunar environment, effects on communication, command, and control systems; effects on positioning, navigation, and timing (PNT) systems; effects on radar systems, and effects on spacecraft. Sources that enable future operational systems to meet performance, reliability, maintainability, supportability, and affordability goals, or which enhance performance or significantly reduce cost, schedule, or risk of existing technologies, are of particular interest. The Space Environment Technologies and Science (SETS) Program encompasses 5 technical areas which may be used in any combination per Call. These technical areas are as follows: Topic Areas: Solar, Solar Wind, and Ionospheric Effects The focus is to improve specification and prediction models of ionospheric conditions and phenomena that impact radio frequency signals such as for communications, PNT, and radar systems. Develop and couple advanced solar models with other space environment models such as ionospheric models to improve prediction capabilities. Develop novel approaches to and improve space- and ground-based solar, heliospheric, ionospheric, and magnetospheric instrumentation/data necessary to drive the models. Determine detailed association between environmental conditions and specific impacts on space systems and services. Characterize occurrences of specific environmental effects on space systems and services. Model the dynamics of the equatorial, subauroral, auroral, and polar ionosphere including small scale and irregular structure. Research and development of active experiment techniques, devices, delivery systems, diagnostics, models, and systems impacts. Thermosphere, Satellite Drag and the Reentry Environment The focus is to develop empirical and physics-based models, sensors, and data products to accurately specify and forecast the neutral atmosphere and satellite drag to identify space objects that orbit the Earth, to provide precision orbit determination and prediction, including reentry predictions, to assess the likelihood of collisions. Plasma Physics and Chemistry The focus is to investigate a variety of plasma states, from collisional to magnetized, as well as a variety of compositions, including typical atmospheric species as well as exotic neutral and ionized species and their reactions. Investigate plasma chemistry as related to the fundamentals of catalysis and energetic materials. Particle Effects and Radiation Belt Environment The focus is to specify and predict effects of charged particles on space operations. Improve models of the fluxes of radiation belt and plasma particles in space for use in space system design, mission planning, and other applications of climatological specification. Improve models and analysis of spacecraft charging. Conduct laboratory work in materials and interactions with the environment. Analyze space effects experiment results such as those from the DSX mission. Multi-phenomenology monitoring to provide asymmetric force advantage in sensing, assessment, and attribution of threats and hazards. Develop novel technologies to protect low Earth orbiting (LEO) satellites from the effects of high-altitude nuclear explosions (HANE). Investigate radio waves, specifically very low frequency, propagation in the radiation belt environment. Advance understanding of the interplay between waves and particles that underlie radiation belt dynamics, enabling better specification, forecasting, and mitigation. Cislunar Environment The focus is to develop models, sensors, and data products to accurately specify and forecast the Cislunar plasma and radiation environment in order to support the design and operation of vehicles in the cislunar environment depending upon orbit. Investigate environmental phenomenology of the Near-lunar environment including the radiation and plasma environment in the lunar wake as well as dust fountaining. Deliverable Items: Hardware, software, or data will be identified at the Call level. The following data deliverables are representative of the types of data that may be required: Final Scientific and Technical Reports Hardware created Software Created Significant End Items Monthly or Quarterly Status/Financial Reports Monthly or Quarterly Technical Reports Computer Program Documentation/Software User Manuals Computer Program/Software source code Presentation Materials Patent Reports Prototypes. Data deliverables are subject to negotiations on each individual award. Schedule: The period of performance will be stated in the Call. Organizational Conflict of Interest (OCI): Organizational Conflict of Interest, if applicable, will be determined and addressed at the Call level. System for Award Management (SAM): Unless an exemption in FAR 4.1102 applies, all offerors must: Be registered in the System for Award Management (SAM) prior to submitting a white paper or proposal Maintain an active SAM registration with current information at all times during the active award Provide its Unique Entity Identification number in each application or proposal it submits to the agency On-line registration instructions can be accessed from the SAM home page at www.sam.gov. Potential offerors that are notified to be eligible for an award must submit annual Electronic Representations and Certifications via the System for Award Management (SAM) website. These FAR and DFARS level representations and certifications are required in addition to the representations and certifications included in each Call. Before submitting the Electronic Representations and Certifications, contractors must be registered in the Systems for Award Management (SAM) Database. PLEASE REFER TO ATTACHMENT 1, FOR ADDITIONAL INFORMATION IN THE FULL TEXT ANNOUNCEMENT.
NEEDIPEDIA - COMMERCIAL SOLUTIONS OPENING - CSO
NEEDIPEDIA - COMMERCIAL SOLUTIONS OPENING - CSO - HHM402-23-SC-0002: Designates an interest in the full range and full scope of possible innovative ideas from all interested and qualified sources, to include participation by, and potentially with both traditional and non-traditional members (e.g. large businesses, small businesses, independent consultants, academic institutions, consortium participants, other) that may assist the agency in maximizing operating efficiency and effectiveness in operations, or otherwise provide preeminent technological and/or innovation capability that most capably allows the agency to support its mandated national and international mission requirements. This is a follow-on solicitation to HHM402-19-SC-0002 UPDATE 23APR2024 - NEEDIPEDIA WHITE PAPER COVER SHEET UPDATE1_CSO - DELETED UPDATE 26APR2024 - NEEDIPEDIA WHITE PAPER COVER SHEET UPDATE2_CSO - ATTACHED
NEEDIPEDIA BROAD AGENCY ANNOUNCEMENT - BAA
NEEDIPEDIA BROAD AGENCY ANOUNCEMENT - BAA - HHM402-23-S-0001: Designates an interest in the full range and full scope of possible innovative ideas from all interested and qualified sources, to include participation by, and potentially with both traditional and non-traditional members (e.g. large businesses, small businesses, independent consultants, academic institutions, consortium participants, other) that may assist the agency in maximizing operating efficiency and effectiveness in operations, or otherwise provide preeminent technological and/or innovation capability that most capably allows the agency to support its mandated national and international mission requirements. This is a follow-on solicitation to HHM402-19-S-0001 UPDATE 23APR2024 - NEEDIPEDIA WHITE PAPER COVER SHEET UPDATE1_BAA - DELETED UPDATE 26APR2024 - NEEDIPEDIA WHITE PAPER COVER SHEET UPDATE2_BAA - ATTACHED
NEEDIPEDIA BROAD AGENCY ANNOUNCEMENT - BAA
NEEDIPEDIA BROAD AGENCY ANOUNCEMENT - BAA - HHM402-23-S-0001: Designates an interest in the full range and full scope of possible innovative ideas from all interested and qualified sources, to include participation by, and potentially with both traditional and non-traditional members (e.g. large businesses, small businesses, independent consultants, academic institutions, consortium participants, other) that may assist the agency in maximizing operating efficiency and effectiveness in operations, or otherwise provide preeminent technological and/or innovation capability that most capably allows the agency to support its mandated national and international mission requirements. This is a follow-on solicitation to HHM402-19-S-0001 UPDATE 23APR2024 - NEEDIPEDIA WHITE PAPER COVER SHEET UPDATE1_BAA - DELETED UPDATE 26APR2024 - NEEDIPEDIA WHITE PAPER COVER SHEET UPDATE2_BAA - ATTACHED
NEEDIPEDIA - COMMERCIAL SOLUTIONS OPENING - CSO
NEEDIPEDIA - COMMERCIAL SOLUTIONS OPENING - CSO - HHM402-23-SC-0002: Designates an interest in the full range and full scope of possible innovative ideas from all interested and qualified sources, to include participation by, and potentially with both traditional and non-traditional members (e.g. large businesses, small businesses, independent consultants, academic institutions, consortium participants, other) that may assist the agency in maximizing operating efficiency and effectiveness in operations, or otherwise provide preeminent technological and/or innovation capability that most capably allows the agency to support its mandated national and international mission requirements. This is a follow-on solicitation to HHM402-19-SC-0002 UPDATE 23APR2024 - NEEDIPEDIA WHITE PAPER COVER SHEET UPDATE1_CSO - DELETED UPDATE 26APR2024 - NEEDIPEDIA WHITE PAPER COVER SHEET UPDATE2_CSO - ATTACHED
NEEDIPEDIA BROAD AGENCY ANNOUNCEMENT - BAA
NEEDIPEDIA BROAD AGENCY ANOUNCEMENT - BAA - HHM402-23-S-0001: Designates an interest in the full range and full scope of possible innovative ideas from all interested and qualified sources, to include participation by, and potentially with both traditional and non-traditional members (e.g. large businesses, small businesses, independent consultants, academic institutions, consortium participants, other) that may assist the agency in maximizing operating efficiency and effectiveness in operations, or otherwise provide preeminent technological and/or innovation capability that most capably allows the agency to support its mandated national and international mission requirements. This is a follow-on solicitation to HHM402-19-S-0001 UPDATE 23APR2024 - NEEDIPEDIA WHITE PAPER COVER SHEET UPDATE1_BAA - DELETED UPDATE 26APR2024 - NEEDIPEDIA WHITE PAPER COVER SHEET UPDATE2_BAA - ATTACHED
NEEDIPEDIA - COMMERCIAL SOLUTIONS OPENING - CSO
NEEDIPEDIA - COMMERCIAL SOLUTIONS OPENING - CSO - HHM402-23-SC-0002: Designates an interest in the full range and full scope of possible innovative ideas from all interested and qualified sources, to include participation by, and potentially with both traditional and non-traditional members (e.g. large businesses, small businesses, independent consultants, academic institutions, consortium participants, other) that may assist the agency in maximizing operating efficiency and effectiveness in operations, or otherwise provide preeminent technological and/or innovation capability that most capably allows the agency to support its mandated national and international mission requirements. This is a follow-on solicitation to HHM402-19-SC-0002 UPDATE 23APR2024 - NEEDIPEDIA WHITE PAPER COVER SHEET UPDATE1_CSO - DELETED UPDATE 26APR2024 - NEEDIPEDIA WHITE PAPER COVER SHEET UPDATE2_CSO - ATTACHED
NEEDIPEDIA - COMMERCIAL SOLUTIONS OPENING - CSO
NEEDIPEDIA - COMMERCIAL SOLUTIONS OPENING - CSO - HHM402-23-SC-0002: Designates an interest in the full range and full scope of possible innovative ideas from all interested and qualified sources, to include participation by, and potentially with both traditional and non-traditional members (e.g. large businesses, small businesses, independent consultants, academic institutions, consortium participants, other) that may assist the agency in maximizing operating efficiency and effectiveness in operations, or otherwise provide preeminent technological and/or innovation capability that most capably allows the agency to support its mandated national and international mission requirements. This is a follow-on solicitation to HHM402-19-SC-0002 UPDATE 23APR2024 - NEEDIPEDIA WHITE PAPER COVER SHEET UPDATE1_CSO - ATTACHED
NEEDIPEDIA BROAD AGENCY ANNOUNCEMENT - BAA
NEEDIPEDIA BROAD AGENCY ANOUNCEMENT - BAA - HHM402-23-S-0001: Designates an interest in the full range and full scope of possible innovative ideas from all interested and qualified sources, to include participation by, and potentially with both traditional and non-traditional members (e.g. large businesses, small businesses, independent consultants, academic institutions, consortium participants, other) that may assist the agency in maximizing operating efficiency and effectiveness in operations, or otherwise provide preeminent technological and/or innovation capability that most capably allows the agency to support its mandated national and international mission requirements. This is a follow-on solicitation to HHM402-19-S-0001 UPDATE 23APR2024 - NEEDIPEDIA WHITE PAPER COVER SHEET UPDATE1_BAA - IS ATTACHED
NEEDIPEDIA - COMMERCIAL SOLUTIONS OPENING - CSO
NEEDIPEDIA - COMMERCIAL SOLUTIONS OPENING - CSO - HHM402-23-SC-0002: Designates an interest in the full range and full scope of possible innovative ideas from all interested and qualified sources, to include participation by, and potentially with both traditional and non-traditional members (e.g. large businesses, small businesses, independent consultants, academic institutions, consortium participants, other) that may assist the agency in maximizing operating efficiency and effectiveness in operations, or otherwise provide preeminent technological and/or innovation capability that most capably allows the agency to support its mandated national and international mission requirements. This is a follow-on solicitation to HHM402-19-SC-0002
NEEDIPEDIA BROAD AGENCY ANNOUNCEMENT - BAA
NEEDIPEDIA BROAD AGENCY ANOUNCEMENT - BAA - HHM402-23-S-0001: Designates an interest in the full range and full scope of possible innovative ideas from all interested and qualified sources, to include participation by, and potentially with both traditional and non-traditional members (e.g. large businesses, small businesses, independent consultants, academic institutions, consortium participants, other) that may assist the agency in maximizing operating efficiency and effectiveness in operations, or otherwise provide preeminent technological and/or innovation capability that most capably allows the agency to support its mandated national and international mission requirements. This is a follow-on solicitation to HHM402-19-S-0001
NEEDIPEDIA - COMMERCIAL SOLUTIONS OPENING - CSO
NEEDIPEDIA - COMMERCIAL SOLUTIONS OPENING - CSO - HHM402-23-SC-0002: Designates an interest in the full range and full scope of possible innovative ideas from all interested and qualified sources, to include participation by, and potentially with both traditional and non-traditional members (e.g. large businesses, small businesses, independent consultants, academic institutions, consortium participants, other) that may assist the agency in maximizing operating efficiency and effectiveness in operations, or otherwise provide preeminent technological and/or innovation capability that most capably allows the agency to support its mandated national and international mission requirements. This is a follow-on solicitation to HHM402-19-SC-0002
NEEDIPEDIA BROAD AGENCY ANNOUNCEMENT - BAA
NEEDIPEDIA BROAD AGENCY ANOUNCEMENT - BAA - HHM402-23-S-0001: Designates an interest in the full range and full scope of possible innovative ideas from all interested and qualified sources, to include participation by, and potentially with both traditional and non-traditional members (e.g. large businesses, small businesses, independent consultants, academic institutions, consortium participants, other) that may assist the agency in maximizing operating efficiency and effectiveness in operations, or otherwise provide preeminent technological and/or innovation capability that most capably allows the agency to support its mandated national and international mission requirements. This is a follow-on solicitation to HHM402-19-S-0001
NEEDIPEDIA BROAD AGENCY ANNOUNCEMENT - BAA
NEEDIPEDIA BROAD AGENCY ANOUNCEMENT - BAA - HHM402-23-S-0001: Designates an interest in the full range and full scope of possible innovative ideas from all interested and qualified sources, to include participation by, and potentially with both traditional and non-traditional members (e.g. large businesses, small businesses, independent consultants, academic institutions, consortium participants, other) that may assist the agency in maximizing operating efficiency and effectiveness in operations, or otherwise provide preeminent technological and/or innovation capability that most capably allows the agency to support its mandated national and international mission requirements. This is a follow-on solicitation to HHM402-19-S-0001 UPDATE 23APR2024 - NEEDIPEDIA WHITE PAPER COVER SHEET UPDATE1_BAA - DELETED UPDATE 26APR2024 - NEEDIPEDIA WHITE PAPER COVER SHEET UPDATE2_BAA - ATTACHED
NEEDIPEDIA - COMMERCIAL SOLUTIONS OPENING - CSO
NEEDIPEDIA - COMMERCIAL SOLUTIONS OPENING - CSO - HHM402-23-SC-0002: Designates an interest in the full range and full scope of possible innovative ideas from all interested and qualified sources, to include participation by, and potentially with both traditional and non-traditional members (e.g. large businesses, small businesses, independent consultants, academic institutions, consortium participants, other) that may assist the agency in maximizing operating efficiency and effectiveness in operations, or otherwise provide preeminent technological and/or innovation capability that most capably allows the agency to support its mandated national and international mission requirements. This is a follow-on solicitation to HHM402-19-SC-0002 UPDATE 23APR2024 - NEEDIPEDIA WHITE PAPER COVER SHEET UPDATE1_CSO - DELETED UPDATE 26APR2024 - NEEDIPEDIA WHITE PAPER COVER SHEET UPDATE2_CSO - ATTACHED
2025 Main Bus Program
January 22, 2024 Update Please review the following information regarding obtaining a GSA GACA account to access and listen to the conference's recording, if interested. https://insite.gsa.gov/employee-resources/information-technology/it-security-and-privacy/it-security/sharing-securely/gsa-affiliated-customer-account-gaca?term=gaca&check_logged_in=1 *********************************************************************************** January 18, 2024 Update This update to the Pre-Solicitation notice provides the Powerpoint Slidedeck of today's conference along with Questions and Answers from the conference. The conference was recorded, and those who would like access to the recording need to reach out to the Contracting Officer to request a GSA GACA account so that access can be provided to listen to this recording. *********************************************************************************** The General Services Administration's (GSA) Automotive Acquisition Support Center invites firms interested in submitting offers under the Government's upcoming solicitation for 2025 Buses to participate in the 2025 Federal Vehicles Standards process beginning January 11, 2024. This process, conducted via GSA's Engineering Division, assists GSA's Vehicle Buying program to develop the Government's technical requirements for motor vehicles. Vehicle types being sought by the Government for this program include, but are not limited to: - Adult Work Buses - School Buses - Shuttles - Inter-City Commuter Coaches - Over the Road Touring Coaches Vehicle types, by Special Item Number (SIN) under Solicitation Number 47QMCA24R0006, being sought by the Government include: 202C - 24 PAX CHILDREN, TYPE A, SCHOOL BUS, BASIC 220A - 28 PAX ADULT, TYPE C, WORK BUS, BASIC 220C - 42 PAX CHILDREN, TYPE C, SCHOOL BUS, BASIC 221A - 36 PAX ADULT, TYPE C, WORK BUS, BASIC 221C - 54 PAX CHILDREN, TYPE C, SCHOOL BUS, BASIC 222A - 40 PAX ADULT, TYPE C, WORK BUS, BASIC 222C - 66 PAX CHILDREN TYPE C, SCHOOL BUS, BASIC 230A - 32 PAX ADULT, TYPE D FRONT ENGINE, WORK BUS, BASIC 232A - 44 PAX ADULT, TYPE D FRONT ENGINE, WORK BUS, BASIC 232C - 72 PAX CHILDREN, TYPE D FRONT ENGINE, SCHOOL BUS, BASIC 236A - 32 PAX ADULT, TYPE D REAR ENGINE, WORK BUS, BASIC 236C - 54 PAX CHILDREN, TYPE D REAR ENGINE, SCHOOL BUS, BASIC 238A - 44 PAX ADULT, TYPE D REAR ENGINE, WORK BUS, BASIC 238C - 78 PAX CHILDREN, TYPE D REAR ENGINE, SCHOOL BUS, BASIC 301C - 14 PAX CHILDREN, TYPE A, SCHOOL BUS 302C - 24 PAX CHILDREN, TYPE A, SCHOOL BUS 304C - 30 PAX CHILDREN, TYPE A, SCHOOL BUS 320A - 28 PAX ADULT, TYPE C, WORK BUS 320C - 42 PAX CHILDREN, TYPE C, SCHOOL BUS 321A - 36 PAX ADULT, TYPE C, WORK BUS 321C - 54 PAX CHILDREN, TYPE C, SCHOOL BUS 322A - 40 PAX ADULT, TYPE C, WORK BUS 322C - 66 PAX CHILDREN, TYPE C, SCHOOL BUS 330A - 32 PAX ADULT, TYPE D FRONT ENGINE, WORK BUS 332A - 44 PAX ADULT, TYPE D FRONT ENGINE, WORK BUS 332C - 72 PAX CHILDREN, TYPE D FRONT ENGINE, SCHOOL BUS 336A - 32 PAX ADULT, TYPE D REAR ENGINE, WORK BUS 336C - 54 PAX CHILDREN, TYPE D REAR ENGINE, SCHOOL BUS 338A - 44 PAX ADULT, TYPE D REAR ENGINE, WORK BUS 338C - 78 PAX CHILDREN, TYPE D REAR ENGINE, SCHOOL BUS 240L - 10 PAX ADULT, LOW-FLOOR, 90-98 INCH WIDE, LIGHT-DUTY SHUTTLE BUS 241 - 12 PAX ADULT , 90-98 INCH WIDE, LIGHT-DUTY SHUTTLE BUS, BASIC 241N - 12 PAX ADULT, 77-89 INCH WIDE, LIGHT-DUTY SHUTTLE BUS, BASIC 242 - 16 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY SHUTTLE BUS, BASIC 242N - 16 PAX ADULT, 77-89 INCH WIDE, LIGHT DUTY SHUTTLE BUS, BASIC 243 - 20 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY SHUTTLE BUS, BASIC 246 - 24 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY SHUTTLE BUS, BASIC 247 - 28 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS, BASIC 341 - 12 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS 341N - 12 PAX ADULT, 77-89 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS 342 - 16 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS 342L - 16 PAX ADULT, LOW-FLOOR, LIGHT-DUTY, SHUTTLE BUS 342N - 16 PAX ADULT, 77-89 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS 343 - 20 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS 343L - 20 PAX ADULT, LOW-FLOOR, LIGHT-DUTY, SHUTTLE BUS 346 - 24 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS 346L - 24 PAX ADULT, LOW-FLOOR, LIGHT-DUTY, SHUTTLE BUS 347 - 28 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS 347L - 28 PAX ADULT, LOW-FLOOR, LIGHT-DUTY, SHUTTLE BUS 259W - 28 PAX ADULT, 100-102 INCH WIDE, MEDIUM-DUTY SHUTTLE BUS, BASIC 260 - 32 PAX ADULT, 94-99 INCH WIDE, MEDIUM-DUTY SHUTTLE BUS, BASIC 260W - 32 PAX ADULT, 100-102 INCH WIDE, MEDIUM-DUTY SHUTTLE BUS, BASIC 263 - 36 PAX ADULT, 94-99 INCH WIDE, MEDIUM-DUTY, SHUTTLE BUS, BASIC 263W - 36 PAX ADULT, 100-102 INCH WIDE, MEDIUM-DUTY SHUTTLE BUS, BASIC 359W - 28 PAX ADULT, 100-102 INCH WIDE, MEDIUM-DUTY, SHUTTLE BUS 360 - 32 PAX ADULT, 94 TO 99-INCH, MEDIUM-DUTY, SHUTTLE BUS 360L - 32 PAX ADULT, LOW-FLOOR, MEDIUM-DUTY, SHUTTLE BUS 360W - 32 PAX ADULT, 100-102 INCH WIDE, MEDIUM-DUTY, SHUTTLE BUS 363 - 36 PAX ADULT PASSENGER, MEDIUM-DUTY, SHUTTLE BUS 363W - 36 PAX ADULT, 100-102 INCH WIDE, MEDIUM-DUTY, SHUTTLE BUS 396 - 49 PAX ADULT, HEAVY-DUTY, INTERCITY, COMMUTER COACH 397 - 57 PAX ADULT, HEAVY-DUTY, INTERCITY, COMMUTER COACH 398 - 56 PAX ADULT, OVER-THE-ROAD, TOURING COACH The General Services Administration is the mandatory source for vehicles purchased in the United States under the Federal Property Management Regulation (FPMR) 101-26.501. GSA's Vehicle Purchasing Division purchases an estimated 50,000 new model year non-tactical vehicles for Federal Executive Agencies and the Department of Defense annually. All GSA vehicle purchases are governed by program specific Federal Vehicle Standards, which are assimilated by GSA Engineering personnel prior to solicitation publication. The technical review process engages interested parties to provide technical data for vehicles to be potentially offered to the Government in response to the forthcoming solicitation and to assist in the development of the Federal Vehicles Standards for the current model year on the 2025 Main Bus Program. Please note, GSA is NOT requesting pricing at this time. GSA is currently only in the requirements development phase of the acquisition. Interested parties, which have not already done so, should complete the following steps in order to participate: Send a list of makes/models they intend to submit for consideration to Dillon Akyuz, GSA Vehicle Engineer, at doruk.akyuz@gsa.gov by January 18, 2024. Please see the attached "Current Active Models" as a starting point and identify any deletions or additions with your firm's submission. These model lists are necessary for GSA to establish them in our database so they will be available for technical data population. GSA will hold a combined virtual Pre-Solicitation Conference and Industry Day on Thursday, January 18, 2024, from 11:00am-12:00pm EST to review these instructions as well as a discussion of changes from the current 2020 Main Bus Program. All interested parties should plan on attending. The meeting info is as follows: Meeting ID meet.google.com/jpj-jpva-eud Phone Numbers (?US)?+1 401-646-2406 PIN: ?361 241 080# For a better understanding of the potential solicitation requirements, please review the 2020 Main Bus Program Solicitation attached herewith. GSA anticipates many similar proposal requirements and terms and conditions, though full draft RFP terms will be released in the Spring of 2024 under a separate notice. GSA looks forward to your firm's participation in the 2025 Federal Standards for Buses. For additional information please contact GSA's Vehicle Purchasing Division at 844-472-1200 or by email at vehiclebuying@gsa.gov.
2025 Main Bus Program
January 18, 2024 Update This update to the Pre-Solicitation notice provides the Powerpoint Slidedeck of today's conference along with Questions and Answers from the conference. The conference was recorded, and those who would like access to the recording need to reach out to the Contracting Officer to request a GSA GACA account so that access can be provided to listen to this recording. *********************************************************************************** The General Services Administration's (GSA) Automotive Acquisition Support Center invites firms interested in submitting offers under the Government's upcoming solicitation for 2025 Buses to participate in the 2025 Federal Vehicles Standards process beginning January 11, 2024. This process, conducted via GSA's Engineering Division, assists GSA's Vehicle Buying program to develop the Government's technical requirements for motor vehicles. Vehicle types being sought by the Government for this program include, but are not limited to: - Adult Work Buses - School Buses - Shuttles - Inter-City Commuter Coaches - Over the Road Touring Coaches Vehicle types, by Special Item Number (SIN) under Solicitation Number 47QMCA24R0006, being sought by the Government include: 202C - 24 PAX CHILDREN, TYPE A, SCHOOL BUS, BASIC 220A - 28 PAX ADULT, TYPE C, WORK BUS, BASIC 220C - 42 PAX CHILDREN, TYPE C, SCHOOL BUS, BASIC 221A - 36 PAX ADULT, TYPE C, WORK BUS, BASIC 221C - 54 PAX CHILDREN, TYPE C, SCHOOL BUS, BASIC 222A - 40 PAX ADULT, TYPE C, WORK BUS, BASIC 222C - 66 PAX CHILDREN TYPE C, SCHOOL BUS, BASIC 230A - 32 PAX ADULT, TYPE D FRONT ENGINE, WORK BUS, BASIC 232A - 44 PAX ADULT, TYPE D FRONT ENGINE, WORK BUS, BASIC 232C - 72 PAX CHILDREN, TYPE D FRONT ENGINE, SCHOOL BUS, BASIC 236A - 32 PAX ADULT, TYPE D REAR ENGINE, WORK BUS, BASIC 236C - 54 PAX CHILDREN, TYPE D REAR ENGINE, SCHOOL BUS, BASIC 238A - 44 PAX ADULT, TYPE D REAR ENGINE, WORK BUS, BASIC 238C - 78 PAX CHILDREN, TYPE D REAR ENGINE, SCHOOL BUS, BASIC 301C - 14 PAX CHILDREN, TYPE A, SCHOOL BUS 302C - 24 PAX CHILDREN, TYPE A, SCHOOL BUS 304C - 30 PAX CHILDREN, TYPE A, SCHOOL BUS 320A - 28 PAX ADULT, TYPE C, WORK BUS 320C - 42 PAX CHILDREN, TYPE C, SCHOOL BUS 321A - 36 PAX ADULT, TYPE C, WORK BUS 321C - 54 PAX CHILDREN, TYPE C, SCHOOL BUS 322A - 40 PAX ADULT, TYPE C, WORK BUS 322C - 66 PAX CHILDREN, TYPE C, SCHOOL BUS 330A - 32 PAX ADULT, TYPE D FRONT ENGINE, WORK BUS 332A - 44 PAX ADULT, TYPE D FRONT ENGINE, WORK BUS 332C - 72 PAX CHILDREN, TYPE D FRONT ENGINE, SCHOOL BUS 336A - 32 PAX ADULT, TYPE D REAR ENGINE, WORK BUS 336C - 54 PAX CHILDREN, TYPE D REAR ENGINE, SCHOOL BUS 338A - 44 PAX ADULT, TYPE D REAR ENGINE, WORK BUS 338C - 78 PAX CHILDREN, TYPE D REAR ENGINE, SCHOOL BUS 240L - 10 PAX ADULT, LOW-FLOOR, 90-98 INCH WIDE, LIGHT-DUTY SHUTTLE BUS 241 - 12 PAX ADULT , 90-98 INCH WIDE, LIGHT-DUTY SHUTTLE BUS, BASIC 241N - 12 PAX ADULT, 77-89 INCH WIDE, LIGHT-DUTY SHUTTLE BUS, BASIC 242 - 16 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY SHUTTLE BUS, BASIC 242N - 16 PAX ADULT, 77-89 INCH WIDE, LIGHT DUTY SHUTTLE BUS, BASIC 243 - 20 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY SHUTTLE BUS, BASIC 246 - 24 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY SHUTTLE BUS, BASIC 247 - 28 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS, BASIC 341 - 12 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS 341N - 12 PAX ADULT, 77-89 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS 342 - 16 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS 342L - 16 PAX ADULT, LOW-FLOOR, LIGHT-DUTY, SHUTTLE BUS 342N - 16 PAX ADULT, 77-89 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS 343 - 20 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS 343L - 20 PAX ADULT, LOW-FLOOR, LIGHT-DUTY, SHUTTLE BUS 346 - 24 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS 346L - 24 PAX ADULT, LOW-FLOOR, LIGHT-DUTY, SHUTTLE BUS 347 - 28 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS 347L - 28 PAX ADULT, LOW-FLOOR, LIGHT-DUTY, SHUTTLE BUS 259W - 28 PAX ADULT, 100-102 INCH WIDE, MEDIUM-DUTY SHUTTLE BUS, BASIC 260 - 32 PAX ADULT, 94-99 INCH WIDE, MEDIUM-DUTY SHUTTLE BUS, BASIC 260W - 32 PAX ADULT, 100-102 INCH WIDE, MEDIUM-DUTY SHUTTLE BUS, BASIC 263 - 36 PAX ADULT, 94-99 INCH WIDE, MEDIUM-DUTY, SHUTTLE BUS, BASIC 263W - 36 PAX ADULT, 100-102 INCH WIDE, MEDIUM-DUTY SHUTTLE BUS, BASIC 359W - 28 PAX ADULT, 100-102 INCH WIDE, MEDIUM-DUTY, SHUTTLE BUS 360 - 32 PAX ADULT, 94 TO 99-INCH, MEDIUM-DUTY, SHUTTLE BUS 360L - 32 PAX ADULT, LOW-FLOOR, MEDIUM-DUTY, SHUTTLE BUS 360W - 32 PAX ADULT, 100-102 INCH WIDE, MEDIUM-DUTY, SHUTTLE BUS 363 - 36 PAX ADULT PASSENGER, MEDIUM-DUTY, SHUTTLE BUS 363W - 36 PAX ADULT, 100-102 INCH WIDE, MEDIUM-DUTY, SHUTTLE BUS 396 - 49 PAX ADULT, HEAVY-DUTY, INTERCITY, COMMUTER COACH 397 - 57 PAX ADULT, HEAVY-DUTY, INTERCITY, COMMUTER COACH 398 - 56 PAX ADULT, OVER-THE-ROAD, TOURING COACH The General Services Administration is the mandatory source for vehicles purchased in the United States under the Federal Property Management Regulation (FPMR) 101-26.501. GSA's Vehicle Purchasing Division purchases an estimated 50,000 new model year non-tactical vehicles for Federal Executive Agencies and the Department of Defense annually. All GSA vehicle purchases are governed by program specific Federal Vehicle Standards, which are assimilated by GSA Engineering personnel prior to solicitation publication. The technical review process engages interested parties to provide technical data for vehicles to be potentially offered to the Government in response to the forthcoming solicitation and to assist in the development of the Federal Vehicles Standards for the current model year on the 2025 Main Bus Program. Please note, GSA is NOT requesting pricing at this time. GSA is currently only in the requirements development phase of the acquisition. Interested parties, which have not already done so, should complete the following steps in order to participate: Send a list of makes/models they intend to submit for consideration to Dillon Akyuz, GSA Vehicle Engineer, at doruk.akyuz@gsa.gov by January 18, 2024. Please see the attached "Current Active Models" as a starting point and identify any deletions or additions with your firm's submission. These model lists are necessary for GSA to establish them in our database so they will be available for technical data population. GSA will hold a combined virtual Pre-Solicitation Conference and Industry Day on Thursday, January 18, 2024, from 11:00am-12:00pm EST to review these instructions as well as a discussion of changes from the current 2020 Main Bus Program. All interested parties should plan on attending. The meeting info is as follows: Meeting ID meet.google.com/jpj-jpva-eud Phone Numbers (?US)?+1 401-646-2406 PIN: ?361 241 080# For a better understanding of the potential solicitation requirements, please review the 2020 Main Bus Program Solicitation attached herewith. GSA anticipates many similar proposal requirements and terms and conditions, though full draft RFP terms will be released in the Spring of 2024 under a separate notice. GSA looks forward to your firm's participation in the 2025 Federal Standards for Buses. For additional information please contact GSA's Vehicle Purchasing Division at 844-472-1200 or by email at vehiclebuying@gsa.gov.
2025 Main Bus Program
The General Services Administration's (GSA) Automotive Acquisition Support Center invites firms interested in submitting offers under the Government's upcoming solicitation for 2025 Buses to participate in the 2025 Federal Vehicles Standards process beginning January 11, 2024. This process, conducted via GSA's Engineering Division, assists GSA's Vehicle Buying program to develop the Government's technical requirements for motor vehicles. Vehicle types being sought by the Government for this program include, but are not limited to: - Adult Work Buses - School Buses - Shuttles - Inter-City Commuter Coaches - Over the Road Touring Coaches Vehicle types, by Special Item Number (SIN) under Solicitation Number 47QMCA24R0006, being sought by the Government include: 202C - 24 PAX CHILDREN, TYPE A, SCHOOL BUS, BASIC 220A - 28 PAX ADULT, TYPE C, WORK BUS, BASIC 220C - 42 PAX CHILDREN, TYPE C, SCHOOL BUS, BASIC 221A - 36 PAX ADULT, TYPE C, WORK BUS, BASIC 221C - 54 PAX CHILDREN, TYPE C, SCHOOL BUS, BASIC 222A - 40 PAX ADULT, TYPE C, WORK BUS, BASIC 222C - 66 PAX CHILDREN TYPE C, SCHOOL BUS, BASIC 230A - 32 PAX ADULT, TYPE D FRONT ENGINE, WORK BUS, BASIC 232A - 44 PAX ADULT, TYPE D FRONT ENGINE, WORK BUS, BASIC 232C - 72 PAX CHILDREN, TYPE D FRONT ENGINE, SCHOOL BUS, BASIC 236A - 32 PAX ADULT, TYPE D REAR ENGINE, WORK BUS, BASIC 236C - 54 PAX CHILDREN, TYPE D REAR ENGINE, SCHOOL BUS, BASIC 238A - 44 PAX ADULT, TYPE D REAR ENGINE, WORK BUS, BASIC 238C - 78 PAX CHILDREN, TYPE D REAR ENGINE, SCHOOL BUS, BASIC 301C - 14 PAX CHILDREN, TYPE A, SCHOOL BUS 302C - 24 PAX CHILDREN, TYPE A, SCHOOL BUS 304C - 30 PAX CHILDREN, TYPE A, SCHOOL BUS 320A - 28 PAX ADULT, TYPE C, WORK BUS 320C - 42 PAX CHILDREN, TYPE C, SCHOOL BUS 321A - 36 PAX ADULT, TYPE C, WORK BUS 321C - 54 PAX CHILDREN, TYPE C, SCHOOL BUS 322A - 40 PAX ADULT, TYPE C, WORK BUS 322C - 66 PAX CHILDREN, TYPE C, SCHOOL BUS 330A - 32 PAX ADULT, TYPE D FRONT ENGINE, WORK BUS 332A - 44 PAX ADULT, TYPE D FRONT ENGINE, WORK BUS 332C - 72 PAX CHILDREN, TYPE D FRONT ENGINE, SCHOOL BUS 336A - 32 PAX ADULT, TYPE D REAR ENGINE, WORK BUS 336C - 54 PAX CHILDREN, TYPE D REAR ENGINE, SCHOOL BUS 338A - 44 PAX ADULT, TYPE D REAR ENGINE, WORK BUS 338C - 78 PAX CHILDREN, TYPE D REAR ENGINE, SCHOOL BUS 240L - 10 PAX ADULT, LOW-FLOOR, 90-98 INCH WIDE, LIGHT-DUTY SHUTTLE BUS 241 - 12 PAX ADULT , 90-98 INCH WIDE, LIGHT-DUTY SHUTTLE BUS, BASIC 241N - 12 PAX ADULT, 77-89 INCH WIDE, LIGHT-DUTY SHUTTLE BUS, BASIC 242 - 16 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY SHUTTLE BUS, BASIC 242N - 16 PAX ADULT, 77-89 INCH WIDE, LIGHT DUTY SHUTTLE BUS, BASIC 243 - 20 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY SHUTTLE BUS, BASIC 246 - 24 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY SHUTTLE BUS, BASIC 247 - 28 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS, BASIC 341 - 12 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS 341N - 12 PAX ADULT, 77-89 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS 342 - 16 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS 342L - 16 PAX ADULT, LOW-FLOOR, LIGHT-DUTY, SHUTTLE BUS 342N - 16 PAX ADULT, 77-89 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS 343 - 20 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS 343L - 20 PAX ADULT, LOW-FLOOR, LIGHT-DUTY, SHUTTLE BUS 346 - 24 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS 346L - 24 PAX ADULT, LOW-FLOOR, LIGHT-DUTY, SHUTTLE BUS 347 - 28 PAX ADULT, 90-98 INCH WIDE, LIGHT-DUTY, SHUTTLE BUS 347L - 28 PAX ADULT, LOW-FLOOR, LIGHT-DUTY, SHUTTLE BUS 259W - 28 PAX ADULT, 100-102 INCH WIDE, MEDIUM-DUTY SHUTTLE BUS, BASIC 260 - 32 PAX ADULT, 94-99 INCH WIDE, MEDIUM-DUTY SHUTTLE BUS, BASIC 260W - 32 PAX ADULT, 100-102 INCH WIDE, MEDIUM-DUTY SHUTTLE BUS, BASIC 263 - 36 PAX ADULT, 94-99 INCH WIDE, MEDIUM-DUTY, SHUTTLE BUS, BASIC 263W - 36 PAX ADULT, 100-102 INCH WIDE, MEDIUM-DUTY SHUTTLE BUS, BASIC 359W - 28 PAX ADULT, 100-102 INCH WIDE, MEDIUM-DUTY, SHUTTLE BUS 360 - 32 PAX ADULT, 94 TO 99-INCH, MEDIUM-DUTY, SHUTTLE BUS 360L - 32 PAX ADULT, LOW-FLOOR, MEDIUM-DUTY, SHUTTLE BUS 360W - 32 PAX ADULT, 100-102 INCH WIDE, MEDIUM-DUTY, SHUTTLE BUS 363 - 36 PAX ADULT PASSENGER, MEDIUM-DUTY, SHUTTLE BUS 363W - 36 PAX ADULT, 100-102 INCH WIDE, MEDIUM-DUTY, SHUTTLE BUS 396 - 49 PAX ADULT, HEAVY-DUTY, INTERCITY, COMMUTER COACH 397 - 57 PAX ADULT, HEAVY-DUTY, INTERCITY, COMMUTER COACH 398 - 56 PAX ADULT, OVER-THE-ROAD, TOURING COACH The General Services Administration is the mandatory source for vehicles purchased in the United States under the Federal Property Management Regulation (FPMR) 101-26.501. GSA's Vehicle Purchasing Division purchases an estimated 50,000 new model year non-tactical vehicles for Federal Executive Agencies and the Department of Defense annually. All GSA vehicle purchases are governed by program specific Federal Vehicle Standards, which are assimilated by GSA Engineering personnel prior to solicitation publication. The technical review process engages interested parties to provide technical data for vehicles to be potentially offered to the Government in response to the forthcoming solicitation and to assist in the development of the Federal Vehicles Standards for the current model year on the 2025 Main Bus Program. Please note, GSA is NOT requesting pricing at this time. GSA is currently only in the requirements development phase of the acquisition. Interested parties, which have not already done so, should complete the following steps in order to participate: Send a list of makes/models they intend to submit for consideration to Dillon Akyuz, GSA Vehicle Engineer, at doruk.akyuz@gsa.gov by January 18, 2024. Please see the attached "Current Active Models" as a starting point and identify any deletions or additions with your firm's submission. These model lists are necessary for GSA to establish them in our database so they will be available for technical data population. GSA will hold a combined virtual Pre-Solicitation Conference and Industry Day on Thursday, January 18, 2024, from 11:00am-12:00pm EST to review these instructions as well as a discussion of changes from the current 2020 Main Bus Program. All interested parties should plan on attending. The meeting info is as follows: Meeting ID meet.google.com/jpj-jpva-eud Phone Numbers (?US)?+1 401-646-2406 PIN: ?361 241 080# For a better understanding of the potential solicitation requirements, please review the 2020 Main Bus Program Solicitation attached herewith. GSA anticipates many similar proposal requirements and terms and conditions, though full draft RFP terms will be released in the Spring of 2024 under a separate notice. GSA looks forward to your firm's participation in the 2025 Federal Standards for Buses. For additional information please contact GSA's Vehicle Purchasing Division at 844-472-1200 or by email at vehiclebuying@gsa.gov.
Job Corps Center Operations Procurement Plan
Concerning Job Corps Center Operations, the Procurement Plan through 2028 is hereby posted.
Air Force Special Operations Command Areas of Interest
**THIS NOTICE IS FOR INFORMATIONAL PURPOSES ONLY** Air Force Special Operations Command (AFSOC) is seeking industry partners with the capabilities to fulfill its key Areas of Interest. AFSOC has identified key areas in the AFSOC Strategic Planning Process (SPP), the Required Capability List (RCL), and the Prioritized Gap List (PGL) and has consolidated it into AFSOC’s Areas of Interest. The Technology and Industry Liaison Office (TILO) is the entry point for industry partners to contact AFSOC. If you are interested in sharing your capabilities with AFSOC, please contact TILO through its org box: AFSOC.A8.TILO@us.af.mil. In the subject line of the email please include the company name and the “Area of Interest” it can support. Also, please attach a capability brief (i.e. PowerPoint, PDF). Additionally, please fill out the Meeting Request Form at the following link: https://forms.osi.apps.mil/pages/responsepage.aspx?id=jbExg4ct70ijX6yIGOv5tAO-8hEaBhVFnf9WSlIpo0RUNVNVTThCNk9DSTA0MFE4MU5KMjRMV05TUyQlQCN0PWcu All inquiries concerning this notice shall be sent in writing via email to AFSOC.A8.TILO@us.af.mil.
Commercial Solutions Opening - Kadena Air Base, Japan
General Information Solicitation Request: 18th Contracting Squadron, Kadena Air Base, Japan is soliciting White Papers on the effort(s) identified as Area(s) of Interest (AoIs) to this solicitation. Type of Contract: The Department of the Air Force (DAF) anticipates the award of a Firm-Fixed Price type contract in accordance with FAR Part 12. Offerors are encouraged to review FAR 52.212-4 and 52.212-5 for standard terms and conditions of a FAR Part 12 contract. In addition, the DAF reserves the right to award an Other Transaction (OT) for Prototype Project in accordance with 10 U.S.C. 4022. This acquisition is Full and Open. Estimated Program Cost: See respective AoI Anticipated Number of Awards: The DAF does not have an anticipated number of awards per year for this announcement. However, the DAF reserves the right to award one or more, or no, contracts for all, part, or none of the proposals received. Classified Information. Offerors are encouraged to submit unclassified White Papers to simplify and expedite reviews and response by the Government. If an Offeror deems that a White Paper must contain classified information, contact the Contracting/Agreements Officer at 18CONS.RAPIDx.Cell@us.af.mil. Classified submissions must be handled, labeled, and stored in accordance with the National Industrial Security Program Operating Manual. Offerors must possess all required personnel security clearances, facility clearances, and other infrastructure requirements necessary to perform any proposed classified work in accordance with the Contract Security Classification Specification (DD Form 254) without reliance on Government resources. Authority The 2014 Quadrennial Defense Review established innovation as a central line of effort in the national defense strategy of the United States. The decisive military advantage of the United States over its adversaries and peer competitors is steadily eroding. Consequently, under DFARS Subpart 212.70, contracting officers may acquire innovative commercial items, technologies, or services using a competitive procedure called a Commercial Solutions Opening (CSO). Under a CSO, the Department of Defense (DoD) may competitively select proposals received in response to a general solicitation, similar to a broad agency announcement, based on a review of proposals by scientific, technological, or other subject-matter expert peers. Use of a CSO in accordance with DFARS Subpart 212.70 is considered to be a competitive procedure for the purposes of 10 U.S.C. chapter 221 and FAR 6.102. Finally, Contracting Officers shall treat items, technologies, and services acquired using a CSO as commercial items. Contracts or agreements under this authority shall be fixed-price, including fixed-price incentive fee contracts CSO Procedure This CSO is a competitive solicitation posted on a Government Point of Entry (GPE) www.sam.gov continuously open until 2 January 2029. This solicitation will be updated no less frequently than annually. The Government reserves the right to extend this CSO beyond the open until date by amendment if the authority is extended. Under this CSO, the DoD may seek solution briefs, presentations/pitches and/or proposals from traditional and nontraditional business entities. This CSO is intended to seek proposals for innovative, commercial products, commercial technologies and services or adaptations/modifications of existing commercial product technologies and services to enable the seamless integration of manufacturing resources from across the enterprise to meet the DAF needs. These include, but are not limited to, quality of life enhancements, supply chain technology and risk management capabilities, maintenance and manufacturing tools, technology, and capabilities, infrastructure enhancements, flexible production and maintenance capabilities, technologies that lead to modern digital systems, workforce safety and training aids, and operational technology cybersecurity hardware, software, and services that support sustainment modernization to speed up decision making and the ability to deliver the right materiel solution to the warfighter at the speed of relevancy. This CSO may result in the award of various types of contracts, which may include but are not limited to acquisition of commercially available technologies immediately available, commercially available technologies fueled by commercial or strategic investment, but also concept demonstrations, pilots, and agile development activities that can incrementally improve commercial technologies, existing Government-owned capabilities, or concepts for broad defense applications. The Government intends to award FAR-based contracts under Part 12, Acquisition of Commercial Products and Commercial Services, but reserves the right to award additional types of contracts depending on the specific AoI and industrial base responses to the AoI. Furthermore, the Government reserves the right to award OT type agreements as a result of this solicitation. CHANGE LOG: 1/7/2024 - AoI-0001 AMENDMENT 1: Correcting the magnitude of the initial range to $250K-$9.5M with a possible inccrease to $35M at a later date. 1/26/2024- Aol-0001 AMENDMENT 2: Please see the attached Government response to CSO questions. Furthermore, if your company requested the use of drone technology, please fill out the attached Drone Request Form. Finally, attached is a DD Form 2345 that will require review/signature. If you are not working with a foreign entity, please state so on the form before signature and return.
Commercial Solutions Opening - Kadena Air Base, Japan
General Information Solicitation Request: 18th Contracting Squadron, Kadena Air Base, Japan is soliciting White Papers on the effort(s) identified as Area(s) of Interest (AoIs) to this solicitation. Type of Contract: The Department of the Air Force (DAF) anticipates the award of a Firm-Fixed Price type contract in accordance with FAR Part 12. Offerors are encouraged to review FAR 52.212-4 and 52.212-5 for standard terms and conditions of a FAR Part 12 contract. In addition, the DAF reserves the right to award an Other Transaction (OT) for Prototype Project in accordance with 10 U.S.C. 4022. This acquisition is Full and Open. Estimated Program Cost: See respective AoI Anticipated Number of Awards: The DAF does not have an anticipated number of awards per year for this announcement. However, the DAF reserves the right to award one or more, or no, contracts for all, part, or none of the proposals received. Classified Information. Offerors are encouraged to submit unclassified White Papers to simplify and expedite reviews and response by the Government. If an Offeror deems that a White Paper must contain classified information, contact the Contracting/Agreements Officer at 18CONS.RAPIDx.Cell@us.af.mil. Classified submissions must be handled, labeled, and stored in accordance with the National Industrial Security Program Operating Manual. Offerors must possess all required personnel security clearances, facility clearances, and other infrastructure requirements necessary to perform any proposed classified work in accordance with the Contract Security Classification Specification (DD Form 254) without reliance on Government resources. Authority The 2014 Quadrennial Defense Review established innovation as a central line of effort in the national defense strategy of the United States. The decisive military advantage of the United States over its adversaries and peer competitors is steadily eroding. Consequently, under DFARS Subpart 212.70, contracting officers may acquire innovative commercial items, technologies, or services using a competitive procedure called a Commercial Solutions Opening (CSO). Under a CSO, the Department of Defense (DoD) may competitively select proposals received in response to a general solicitation, similar to a broad agency announcement, based on a review of proposals by scientific, technological, or other subject-matter expert peers. Use of a CSO in accordance with DFARS Subpart 212.70 is considered to be a competitive procedure for the purposes of 10 U.S.C. chapter 221 and FAR 6.102. Finally, Contracting Officers shall treat items, technologies, and services acquired using a CSO as commercial items. Contracts or agreements under this authority shall be fixed-price, including fixed-price incentive fee contracts CSO Procedure This CSO is a competitive solicitation posted on a Government Point of Entry (GPE) www.sam.gov continuously open until 2 January 2029. This solicitation will be updated no less frequently than annually. The Government reserves the right to extend this CSO beyond the open until date by amendment if the authority is extended. Under this CSO, the DoD may seek solution briefs, presentations/pitches and/or proposals from traditional and nontraditional business entities. This CSO is intended to seek proposals for innovative, commercial products, commercial technologies and services or adaptations/modifications of existing commercial product technologies and services to enable the seamless integration of manufacturing resources from across the enterprise to meet the DAF needs. These include, but are not limited to, quality of life enhancements, supply chain technology and risk management capabilities, maintenance and manufacturing tools, technology, and capabilities, infrastructure enhancements, flexible production and maintenance capabilities, technologies that lead to modern digital systems, workforce safety and training aids, and operational technology cybersecurity hardware, software, and services that support sustainment modernization to speed up decision making and the ability to deliver the right materiel solution to the warfighter at the speed of relevancy. This CSO may result in the award of various types of contracts, which may include but are not limited to acquisition of commercially available technologies immediately available, commercially available technologies fueled by commercial or strategic investment, but also concept demonstrations, pilots, and agile development activities that can incrementally improve commercial technologies, existing Government-owned capabilities, or concepts for broad defense applications. The Government intends to award FAR-based contracts under Part 12, Acquisition of Commercial Products and Commercial Services, but reserves the right to award additional types of contracts depending on the specific AoI and industrial base responses to the AoI. Furthermore, the Government reserves the right to award OT type agreements as a result of this solicitation. CHANGE LOG: 1/7/2024 - AoI-0001 AMENDMENT 1: Correcting the magnitude of the initial range to $250K-$9.5M with a possible inccrease to $35M at a later date. 1/26/2024- Aol-0001 AMENDMENT 2: Please see the attached Government response to CSO questions. Furthermore, if your company requested the use of drone technology, please fill out the attached Drone Request Form. Finally, attached is a DD Form 2345 that will require review/signature. If you are not working with a foreign entity, please state so on the form before signature and return.
Commercial Solutions Opening - Kadena Air Base, Japan
General Information Solicitation Request: 18th Contracting Squadron, Kadena Air Base, Japan is soliciting White Papers on the effort(s) identified as Area(s) of Interest (AoIs) to this solicitation. Type of Contract: The Department of the Air Force (DAF) anticipates the award of a Firm-Fixed Price type contract in accordance with FAR Part 12. Offerors are encouraged to review FAR 52.212-4 and 52.212-5 for standard terms and conditions of a FAR Part 12 contract. In addition, the DAF reserves the right to award an Other Transaction (OT) for Prototype Project in accordance with 10 U.S.C. 4022. This acquisition is Full and Open. Estimated Program Cost: See respective AoI Anticipated Number of Awards: The DAF does not have an anticipated number of awards per year for this announcement. However, the DAF reserves the right to award one or more, or no, contracts for all, part, or none of the proposals received. Classified Information. Offerors are encouraged to submit unclassified White Papers to simplify and expedite reviews and response by the Government. If an Offeror deems that a White Paper must contain classified information, contact the Contracting/Agreements Officer at 18CONS.RAPIDx.Cell@us.af.mil. Classified submissions must be handled, labeled, and stored in accordance with the National Industrial Security Program Operating Manual. Offerors must possess all required personnel security clearances, facility clearances, and other infrastructure requirements necessary to perform any proposed classified work in accordance with the Contract Security Classification Specification (DD Form 254) without reliance on Government resources. Authority The 2014 Quadrennial Defense Review established innovation as a central line of effort in the national defense strategy of the United States. The decisive military advantage of the United States over its adversaries and peer competitors is steadily eroding. Consequently, under DFARS Subpart 212.70, contracting officers may acquire innovative commercial items, technologies, or services using a competitive procedure called a Commercial Solutions Opening (CSO). Under a CSO, the Department of Defense (DoD) may competitively select proposals received in response to a general solicitation, similar to a broad agency announcement, based on a review of proposals by scientific, technological, or other subject-matter expert peers. Use of a CSO in accordance with DFARS Subpart 212.70 is considered to be a competitive procedure for the purposes of 10 U.S.C. chapter 221 and FAR 6.102. Finally, Contracting Officers shall treat items, technologies, and services acquired using a CSO as commercial items. Contracts or agreements under this authority shall be fixed-price, including fixed-price incentive fee contracts CSO Procedure This CSO is a competitive solicitation posted on a Government Point of Entry (GPE) www.sam.gov continuously open until 2 January 2029. This solicitation will be updated no less frequently than annually. The Government reserves the right to extend this CSO beyond the open until date by amendment if the authority is extended. Under this CSO, the DoD may seek solution briefs, presentations/pitches and/or proposals from traditional and nontraditional business entities. This CSO is intended to seek proposals for innovative, commercial products, commercial technologies and services or adaptations/modifications of existing commercial product technologies and services to enable the seamless integration of manufacturing resources from across the enterprise to meet the DAF needs. These include, but are not limited to, quality of life enhancements, supply chain technology and risk management capabilities, maintenance and manufacturing tools, technology, and capabilities, infrastructure enhancements, flexible production and maintenance capabilities, technologies that lead to modern digital systems, workforce safety and training aids, and operational technology cybersecurity hardware, software, and services that support sustainment modernization to speed up decision making and the ability to deliver the right materiel solution to the warfighter at the speed of relevancy. This CSO may result in the award of various types of contracts, which may include but are not limited to acquisition of commercially available technologies immediately available, commercially available technologies fueled by commercial or strategic investment, but also concept demonstrations, pilots, and agile development activities that can incrementally improve commercial technologies, existing Government-owned capabilities, or concepts for broad defense applications. The Government intends to award FAR-based contracts under Part 12, Acquisition of Commercial Products and Commercial Services, but reserves the right to award additional types of contracts depending on the specific AoI and industrial base responses to the AoI. Furthermore, the Government reserves the right to award OT type agreements as a result of this solicitation. CHANGE LOG: 1/7/2024 - AoI-0001 amendment 1: Correcting the magnitude of the initial range to $250K-$9.5M with a possible inccrease to $35M at a later date.
Commercial Solutions Opening - Kadena Air Base, Japan
General Information Solicitation Request: 18th Contracting Squadron, Kadena Air Base, Japan is soliciting White Papers on the effort(s) identified as Area(s) of Interest (AoIs) to this solicitation. Type of Contract: The Department of the Air Force (DAF) anticipates the award of a Firm-Fixed Price type contract in accordance with FAR Part 12. Offerors are encouraged to review FAR 52.212-4 and 52.212-5 for standard terms and conditions of a FAR Part 12 contract. In addition, the DAF reserves the right to award an Other Transaction (OT) for Prototype Project in accordance with 10 U.S.C. 4022. This acquisition is Full and Open. Estimated Program Cost: See respective AoI Anticipated Number of Awards: The DAF does not have an anticipated number of awards per year for this announcement. However, the DAF reserves the right to award one or more, or no, contracts for all, part, or none of the proposals received. Classified Information. Offerors are encouraged to submit unclassified White Papers to simplify and expedite reviews and response by the Government. If an Offeror deems that a White Paper must contain classified information, contact the Contracting/Agreements Officer at 18CONS.RAPIDx.Cell@us.af.mil. Classified submissions must be handled, labeled, and stored in accordance with the National Industrial Security Program Operating Manual. Offerors must possess all required personnel security clearances, facility clearances, and other infrastructure requirements necessary to perform any proposed classified work in accordance with the Contract Security Classification Specification (DD Form 254) without reliance on Government resources. Authority The 2014 Quadrennial Defense Review established innovation as a central line of effort in the national defense strategy of the United States. The decisive military advantage of the United States over its adversaries and peer competitors is steadily eroding. Consequently, under DFARS Subpart 212.70, contracting officers may acquire innovative commercial items, technologies, or services using a competitive procedure called a Commercial Solutions Opening (CSO). Under a CSO, the Department of Defense (DoD) may competitively select proposals received in response to a general solicitation, similar to a broad agency announcement, based on a review of proposals by scientific, technological, or other subject-matter expert peers. Use of a CSO in accordance with DFARS Subpart 212.70 is considered to be a competitive procedure for the purposes of 10 U.S.C. chapter 221 and FAR 6.102. Finally, Contracting Officers shall treat items, technologies, and services acquired using a CSO as commercial items. Contracts or agreements under this authority shall be fixed-price, including fixed-price incentive fee contracts CSO Procedure This CSO is a competitive solicitation posted on a Government Point of Entry (GPE) www.sam.gov continuously open until 2 January 2029. This solicitation will be updated no less frequently than annually. The Government reserves the right to extend this CSO beyond the open until date by amendment if the authority is extended. Under this CSO, the DoD may seek solution briefs, presentations/pitches and/or proposals from traditional and nontraditional business entities. This CSO is intended to seek proposals for innovative, commercial products, commercial technologies and services or adaptations/modifications of existing commercial product technologies and services to enable the seamless integration of manufacturing resources from across the enterprise to meet the DAF needs. These include, but are not limited to, quality of life enhancements, supply chain technology and risk management capabilities, maintenance and manufacturing tools, technology, and capabilities, infrastructure enhancements, flexible production and maintenance capabilities, technologies that lead to modern digital systems, workforce safety and training aids, and operational technology cybersecurity hardware, software, and services that support sustainment modernization to speed up decision making and the ability to deliver the right materiel solution to the warfighter at the speed of relevancy. This CSO may result in the award of various types of contracts, which may include but are not limited to acquisition of commercially available technologies immediately available, commercially available technologies fueled by commercial or strategic investment, but also concept demonstrations, pilots, and agile development activities that can incrementally improve commercial technologies, existing Government-owned capabilities, or concepts for broad defense applications. The Government intends to award FAR-based contracts under Part 12, Acquisition of Commercial Products and Commercial Services, but reserves the right to award additional types of contracts depending on the specific AoI and industrial base responses to the AoI. Furthermore, the Government reserves the right to award OT type agreements as a result of this solicitation.
Combined Synopsis/Solicitation for Non-Personal Commercial Lodging within a 30 miles radius from Homestead ARB, FL
This requirement is a set-aside for Small Businesses only and is a combined synopsis/solicitation to award multiple Blank Purchase Agreement (BPAs) for non -personal commercial lodging accommodation within a 30 miles radius of Homestead ARB, FL. This synopsis/solicitation is prepared in accordance with the format in FAR Subpart 12.6 and is supplemented with additional information included in this notice. This announcement constitutes the only synopsis/solicitation. This 100% SB set-aside shall use the North American Industry Classification System (NAICS) code 721110, Hotels (except Casino Hotels) and Motels and Product Service Code (PSC) V231, Lodging, Hotel/Motel. The SB size standard is $40 M. Each awarded BPA shall have up to five (5) year period of performance (POP) with a minimum order value of $1.00 up to the established ceiling. NOTE: The ceiling can be increased/decreased at any time by the Contracting Officer via a bilateral modification to meet current/future needs. Such instances might include COVID-19, national disasters, an/or any instance/reason the Government determines the need for increased/decreased lodging services are needed. Contractors who want to be considered for a BPA with Homestead ARB shall submit a capability statement showing their aptitude/capability to meet all requirements defined in the BPA Lodging PAP and BPA Lodging SOW attached to this notice. The capability statement shall include the following: Contractor’s Name (doing Business as (DBA) Name) Physical Address with distance from Homestead ARB Point of Contact to include name, phone number and email address Verification of SAM registration with UEI and cage code Capability Statement showing how the Contractor can meet all requirements of this solicitation. Current Price List within the approved GSA Per Diem Rates that are Tax Exempt and comply with the requests contained in BPA Lodging PAP and BPA Lodging SOW. Awarded BPA might be made to responsible offerors who provide a capability statement documentation that they can successfully meet all the requirements above AND pass an in-person or virtual initial quality surveillance inspection with no discrepancies. Contractors who are interested in this requirement shall submit their capability statements to Contract Specialist/Officer Tahj Guilford at Tahj.Guilford.2@us.af.mil This Combined Synopsis/Solicitation is set to expire January 7, 2029 at 4:00 PM EST.
Combined Synopsis/Solicitation for Non-Personal Commercial Lodging within a 30 miles radius from Homestead ARB, FL
This requirement is a set-aside for Small Businesses only and is a combined synopsis/solicitation to award multiple Blank Purchase Agreement (BPAs) for non -personal commercial lodging accommodation within a 30 miles radius of Homestead ARB, FL. This synopsis/solicitation is prepared in accordance with the format in FAR Subpart 12.6 and is supplemented with additional information included in this notice. This announcement constitutes the only synopsis/solicitation. This 100% SB set-aside shall use the North American Industry Classification System (NAICS) code 721110, Hotels (except Casino Hotels) and Motels and Product Service Code (PSC) V231, Lodging, Hotel/Motel. The SB size standard is $40 M. Each awarded BPA shall have up to five (5) year period of performance (POP) with a minimum order value of $1.00 up to the established ceiling. NOTE: The ceiling can be increased/decreased at any time by the Contracting Officer via a bilateral modification to meet current/future needs. Such instances might include COVID-19, national disasters, an/or any instance/reason the Government determines the need for increased/decreased lodging services are needed. Contractors who want to be considered for a BPA with Homestead ARB shall submit a capability statement showing their aptitude/capability to meet all requirements defined in the BPA Lodging PAP and BPA Lodging SOW attached to this notice. The capability statement shall include the following: Contractor’s Name (doing Business as (DBA) Name) Physical Address with distance from Homestead ARB Point of Contact to include name, phone number and email address Verification of SAM registration with UEI and cage code Capability Statement showing how the Contractor can meet all requirements of this solicitation. Current Price List within the approved GSA Per Diem Rates that are Tax Exempt and comply with the requests contained in BPA Lodging PAP and BPA Lodging SOW. Awarded BPA might be made to responsible offerors who provide a capability statement documentation that they can successfully meet all the requirements above AND pass an in-person or virtual initial quality surveillance inspection with no discrepancies. Contractors who are interested in this requirement shall submit their capability statements to Contract Specialist/Officer Tahj Guilford at Tahj.Guilford.2@us.af.mil This Combined Synopsis/Solicitation is set to expire January 7, 2029 at 4:00 PM EST.
Combined Synopsis/Solicitation for Non-Personal Commercial Lodging within a 30 miles radius from Homestead ARB, FL
This requirement is a set-aside for Small Businesses only and is a combined synopsis/solicitation to award multiple Blank Purchase Agreement (BPAs) for non -personal commercial lodging accommodation within a 30 miles radius of Homestead ARB, FL. This synopsis/solicitation is prepared in accordance with the format in FAR Subpart 12.6 and is supplemented with additional information included in this notice. This announcement constitutes the only synopsis/solicitation. This 100% SB set-aside shall use the North American Industry Classification System (NAICS) code 721110, Hotels (except Casino Hotels) and Motels and Product Service Code (PSC) V231, Lodging, Hotel/Motel. The SB size standard is $40 M. Each awarded BPA shall have up to five (5) year period of performance (POP) with a minimum order value of $1.00 up to the established ceiling. NOTE: The ceiling can be increased/decreased at any time by the Contracting Officer via a bilateral modification to meet current/future needs. Such instances might include COVID-19, national disasters, an/or any instance/reason the Government determines the need for increased/decreased lodging services are needed. Contractors who want to be considered for a BPA with Homestead ARB shall submit a capability statement showing their aptitude/capability to meet all requirements defined in the BPA Lodging PAP and BPA Lodging SOW attached to this notice. The capability statement shall include the following: Contractor’s Name (doing Business as (DBA) Name) Physical Address with distance from Homestead ARB Point of Contact to include name, phone number and email address Verification of SAM registration with UEI and cage code Capability Statement showing how the Contractor can meet all requirements of this solicitation. Current Price List within the approved GSA Per Diem Rates that are Tax Exempt and comply with the requests contained in BPA Lodging PAP and BPA Lodging SOW. Awarded BPA might be made to responsible offerors who provide a capability statement documentation that they can successfully meet all the requirements above AND pass an in-person or virtual initial quality surveillance inspection with no discrepancies. Contractors who are interested in this requirement shall submit their capability statements to Contract Specialist/Officer Tahj Guilford at Tahj.Guilford.2@us.af.mil
Combined Synopsis/Solicitation for Non-Personal Commercial Lodging within a 30 miles radius from Homestead ARB, FL
This requirement is a set-aside for Small Businesses only and is a combined synopsis/solicitation to award multiple Blank Purchase Agreement (BPAs) for non -personal commercial lodging accommodation within a 30 miles radius of Homestead ARB, FL. This synopsis/solicitation is prepared in accordance with the format in FAR Subpart 12.6 and is supplemented with additional information included in this notice. This announcement constitutes the only synopsis/solicitation. This 100% SB set-aside shall use the North American Industry Classification System (NAICS) code 721110, Hotels (except Casino Hotels) and Motels and Product Service Code (PSC) V231, Lodging, Hotel/Motel. The SB size standard is $40 M. Each awarded BPA shall have up to five (5) year period of performance (POP) with a minimum order value of $1.00 up to the established ceiling. NOTE: The ceiling can be increased/decreased at any time by the Contracting Officer via a bilateral modification to meet current/future needs. Such instances might include COVID-19, national disasters, an/or any instance/reason the Government determines the need for increased/decreased lodging services are needed. Contractors who want to be considered for a BPA with Homestead ARB shall submit a capability statement showing their aptitude/capability to meet all requirements defined in the BPA Lodging PAP and BPA Lodging SOW attached to this notice. The capability statement shall include the following: Contractor’s Name (doing Business as (DBA) Name) Physical Address with distance from Homestead ARB Point of Contact to include name, phone number and email address Verification of SAM registration with UEI and cage code Capability Statement showing how the Contractor can meet all requirements of this solicitation. Current Price List within the approved GSA Per Diem Rates that are Tax Exempt and comply with the requests contained in BPA Lodging PAP and BPA Lodging SOW. Awarded BPA might be made to responsible offerors who provide a capability statement documentation that they can successfully meet all the requirements above AND pass an in-person or virtual initial quality surveillance inspection with no discrepancies. Contractors who are interested in this requirement shall submit their capability statements to Contract Specialist Tahj Guilford and Contracting Officer Daniela Marton.
Strategic Capabilities Office Broad Agency Announcement
Strategic Capabilities Office (SCO) is an organization within the Office of the Secretary of Defense which seeks to identify, analyze, and prototype disruptive applications of new systems, unconventional uses of existing systems, and implement emerging technologies to create operational strategic effects. SCO is a rapid prototyping organization focused on delivering capabilities in 3-5 years to address high priority operational and strategic challenges. The purpose of this BAA, issued under Federal Acquisition Regulation (FAR) parts 6.102(d)(2) and 35.016, is to solicit research submissions for funding consideration in the five areas of technical interest established herein. Procurement contracts, as well as OT agreements for research or prototypes under the authorities of 10 United States Code (U.S.C.) §§ 4021-4022, respectively, may result from this BAA. Amendment 1 posts Questions and Answers and provides edits to the BAA to clarify the submission process.
Q999--621 R4 - RFP-797-FSS-00-0115-R4 and Amendments 1-5
This adds amendment 0004 to currently published solicitation RFP-797-FSS-00-0115-R4.
JPEO-CBRND CWMD BOTAA-24-01
The Joint Program Executive Office for Chemical, Biological, Radiological, and Nuclear Defense (JPEO-CBRND), a component of the U.S. Department of Defense’s Chemical and Biological Defense Program, protects the entire Joint Force – Army, Navy, Air Force, Marines, Coast Guard, and First Responders – through the advanced development of CBRND capabilities. JPEO-CBRND is organized into four Joint Project Management Offices (JPMO) and two Joint Project Lead Offices (JPLO), each responsible for specific commodity areas as described further in the JPEO-CBRND website at https://www.jpeocbrnd.osd.mil/. Three JPMs and one JPL provide oversight for the portfolios covered under this Broad Other Transaction Authority Announcement (BOTAA): JPM CBRN Protection, JPM CBRN Sensors, JPM CBRN Special Operations Forces, and JPL CBRN Integration. Under the authority of 10 U.S.C. 4022, JPEO-CBRND seeks to award funding through Other Transaction Authority agreements (OTAs or Agreements) for prototype and follow-on production projects within JPEO-CBRND mission areas of Interest identified in Section IV.B of the attached document titled, CWMD-BOTAA. JPEO-CBRND is interested in efforts directed toward the development of enabling technologies that speed up the advanced development process. Proposals are sought from all eligible sources as specified, including educational institutions, nonprofit organizations, and private industry. This Announcement provides general information, proposal preparation instructions, evaluation and selection criteria, and award administration information. BOTAA Award Process Overview: Offerors may submit pre-proposals against any mission area of interest listed in Section IV. (Note: Guidelines for the requirements of a pre-proposal are listed in Section III B 1.) Pre-proposals are reviewed by the requiring office of the Government. If there is interest, the Government may reply with a Request for Full Proposal (RFFP) within 60-90 days. (Note: The Guidelines for all required information needed for a full proposal is explained in Section III B 2.) The offeror will prepare and submit the full proposal in accordance with the RFFP, generally set at 30 days for submission. Once received, the Government will evaluate the proposal. Discussions amongst the parties, whether verbally or in writing, may occur as appropriate. Subject to approvals and successful discussions, the Government may send an agreement to the offeror. Additional discussions may occur as necessary. Awards, if any, will be made after evaluation and selection of a successful proposal. (Note: Awards are dependent upon the availability of funds.) The Government may issue separate Requests for Project Proposals (RPPs) under this BOTAA for additional areas of interest or specific prototype needs. Unless otherwise stated in a particular RPP, responses to RPPs issued under this BOTAA will follow the same process described above for review and selection. Detailed instructions on submitting responses to this BOTAA or RPPs issued under this BOTAA can be found in Part III Section B of this document. To facilitate communication on both technical and administrative matters relating to this Announcement, a single email address may be used for all communication with the JPEO-CBRND. Please send all technical and administrative questions and inquiries to usarmy.apg.acc.mbx.jpeo-cbrnd-botaa@army.mil.
Tri-Base Area Construction Basic Ordering Agreement
This Basic Ordering Agreement (BOA) is a written instrument of understanding, negotiated between the United States Government and the Contractor for a broad range of construction services for the US Government. Work locations include RAF Mildenhall, RAF Lakenheath, and RAF Feltwell. Work under this Agreement will be ordered by issuing Task Orders. This announcement will remain open. Applications will be accepted and evaluated for potential award throughout the period of the Basic Ordering Agreement. We are actively seeking experienced construction contractors for a wide range of construction services in the Tri-Base area in Suffolk, UK. Both principle contractors with a diverse experience in renovating, altering and modernization of facilities and specialty trade contractors experineced in Asphalt and Concrete Paving and Commercial Roofing are urged to apply. Please contact with questions you may have.
Tri-Base Area Construction Basic Ordering Agreement
This Basic Ordering Agreement (BOA) is a written instrument of understanding, negotiated between the United States Government and the Contractor for a broad range of construction services for the US Government. Work locations include RAF Mildenhall, RAF Lakenheath, and RAF Feltwell. Work under this Agreement will be ordered by issuing Task Orders. This announcement will remain open. Applications will be accepted and evaluated for potential award throughout the period of the Basic Ordering Agreement. We are actively seeking experienced construction contractors for a wide range of construction services in the Tri-Base area in Suffolk, UK. Both principle contractors with a diverse experience in renovating, altering and modernization of facilities and specialty trade contractors experineced in Asphalt and Concrete Paving and Commercial Roofing are urged to apply. Please contact with questions you may have.
Tri-Base Area Construction Basic Ordering Agreement
This Basic Ordering Agreement (BOA) is a written instrument of understanding, negotiated between the United States Government and the Contractor for a broad range of construction services for the US Government. Work locations include RAF Mildenhall, RAF Lakenheath, and RAF Feltwell. Work under this Agreement will be ordered by issuing Task Orders. This announcement will remain open. Applications will be accepted and evaluated for potential award throughout the period of the Basic Ordering Agreement. We are actively seeking experienced construction contractors for a wide range of construction services in the Tri-Base area in Suffolk, UK. Both principle contractors with a diverse experience in renovating, altering and modernization of facilities and specialty trade contractors experineced in Asphalt and Concrete Paving and Commercial Roofing are urged to apply. Please contact with questions you may have.
Tri-Base Area Construction Basic Ordering Agreement
This Basic Ordering Agreement (BOA) is a written instrument of understanding, negotiated between the United States Government and the Contractor for a broad range of construction services for the US Government. Work locations include RAF Mildenhall, RAF Lakenheath, and RAF Feltwell. Work under this Agreement will be ordered by issuing Task Orders. This announcement will remain open. Applications will be accepted and evaluated for potential award throughout the period of the Basic Ordering Agreement.
Tri-Base Area Construction Basic Ordering Agreement
This Basic Ordering Agreement (BOA) is a written instrument of understanding, negotiated between the United States Government and the Contractor for a broad range of construction services for the US Government. Work locations include RAF Mildenhall, RAF Lakenheath, and RAF Feltwell. Work under this Agreement will be ordered by issuing Task Orders. This announcement will remain open. Applications will be accepted and evaluated for potential award throughout the period of the Basic Ordering Agreement. We are actively seeking experienced construction contractors for a wide range of construction services in the Tri-Base area in Suffolk, UK. Both principle contractors with a diverse experience in renovating, altering and modernization of facilities and specialty trade contractors experineced in Asphalt and Concrete Paving and Commercial Roofing are urged to apply. Please contact with questions you may have. Amend 03 removed several clauses from the Model Agreement and revised Atch 5-Application Instructions, and revised Atch 6-Application Evaluataion Procedures
Non-Complex Construction and Design Build Construction, Basic Ordering Agreement RAF Lakenheath, Suffolk
Non-Complex Construction and Design Build Construction, Basic Ordering Agreement RAF Lakenheath, Suffolk
Browse by Type
Federal Contracting Resources
Learn more about federal contracting opportunities and how to win
Frequently Asked Questions
Find answers to common questions
Articles & Research
In-depth guides and data-driven insights
Glossary
Learn the terminology
Free Tools
Helpful tools for federal contractors